5.10.195-rc1 review
Subsystems (12)
Greg Kroah-Hartman
maintainerPATCH 1/406 erofs: ensure that the post-EOF tails are all zeroed
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gao Xiang <[email protected]>
commit e4c1cf523d820730a86cae2c6d55924833b6f7ac upstream.
This was accidentally fixed up in commit e4c1cf523d82 but we can't take the full change due to other dependancy issues, so here is just the actual bugfix that is needed.
[Background]
keltargw reported an issue [1] that with mmaped I/Os, sometimes the tail of the last page (after file ends) is not filled with zeroes.
The root cause is that such tail page could be wrongly selected for inplace I/Os so the zeroed part will then be filled with compressed data instead of zeroes.
A simple fix is to avoid doing inplace I/Os for such tail parts, actually that was already fixed upstream in commit e4c1cf523d82 ("erofs: tidy up z_erofs_do_read_page()") by accident.
[1] https://lore.kernel.org/r/[email protected]
--- fs/erofs/zdata.c | 2 ++ 1 file changed, 2 insertions(+)
fs/erofs/zdata.c +2 -0
@@ -632,6 +632,8 @@ hitted: cur = end -min_t (erofs_off_t, offset + end - map->m_la, end);if (!(map->m_flags &EROFS_MAP_MAPPED )) {zero_user_segment (page, cur, end); + ++spiltted; + tight = false; goto next_part; }
Greg Kroah-Hartman
maintainerPATCH 10/406 usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xu Yang <[email protected]>
commit 36668515d56bf73f06765c71e08c8f7465f1e5c4 upstream.
In current driver, the value of tuning parameter will not take effect if samsung,picophy-* is assigned as 0. Because 0 is also a valid value acccording to the description of USB_PHY_CFG1 register, this will improve the logic to let it work.
--- drivers/usb/chipidea/ci_hdrc_imx.c | 10 ++++++---- drivers/usb/chipidea/usbmisc_imx.c | 6 ++++-- 2 files changed, 10 insertions(+), 6 deletions(-)
drivers/usb/chipidea/ci_hdrc_imx.c +6 -4
@@ -175,10 +175,12 @@ static struct imx_usbmisc_data *usbmisc_if (of_usb_get_phy_mode (np) ==USBPHY_INTERFACE_MODE_ULPI ) data->ulpi =1 ; -of_property_read_u32 (np,"samsung,picophy-pre-emp-curr-control" , - &data->emp_curr_control); -of_property_read_u32 (np,"samsung,picophy-dc-vol-level-adjust" , - &data->dc_vol_level_adjust); +if (of_property_read_u32 (np,"samsung,picophy-pre-emp-curr-control" , + &data->emp_curr_control)) + data->emp_curr_control =-1 ; +if (of_property_read_u32 (np,"samsung,picophy-dc-vol-level-adjust" , + &data->dc_vol_level_adjust)) + data->dc_vol_level_adjust =-1 ;return data; }
drivers/usb/chipidea/usbmisc_imx.c +4 -2
@@ -657,13 +657,15 @@ static int usbmisc_imx7d_init(struct imx usbmisc->base + MX7D_USBNC_USB_CTRL2);/* PHY tuning for signal quality */ reg =readl (usbmisc->base +MX7D_USB_OTG_PHY_CFG1 ); -if (data->emp_curr_control && data->emp_curr_control <= +if (data->emp_curr_control >=0 && + data->emp_curr_control <= (TXPREEMPAMPTUNE0_MASK >>TXPREEMPAMPTUNE0_BIT )) { reg &= ~TXPREEMPAMPTUNE0_MASK ; reg |= (data->emp_curr_control <<TXPREEMPAMPTUNE0_BIT ); } -if (data->dc_vol_level_adjust && data->dc_vol_level_adjust <= +if (data->dc_vol_level_adjust >=0 && + data->dc_vol_level_adjust <= (TXVREFTUNE0_MASK >>TXVREFTUNE0_BIT )) { reg &= ~TXVREFTUNE0_MASK ; reg |= (data->dc_vol_level_adjust <<TXVREFTUNE0_BIT );
Greg Kroah-Hartman
maintainerPATCH 11/406 HID: wacom: remove the battery when the EKR is off
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aaron Armstrong Skomra <[email protected]>
commit 9ac6678b95b0dd9458a7a6869f46e51cd55a1d84 upstream.
Currently the EKR battery remains even after we stop getting information from the device. This can lead to a stale battery persisting indefinitely in userspace.
The remote sends a heartbeat every 10 seconds. Delete the battery if we miss two heartbeats (after 21 seconds). Restore the battery once we see a heartbeat again.
--- drivers/hid/wacom.h | 1 + drivers/hid/wacom_sys.c | 25 +++++++++++++++++++++---- drivers/hid/wacom_wac.c | 1 + drivers/hid/wacom_wac.h | 1 + 4 files changed, 24 insertions(+), 4 deletions(-)
drivers/hid/wacom.h +1 -0
@@ -153,6 +153,7 @@ struct wacom_remote {struct input_dev *input;bool registered;struct wacom_battery battery; +ktime_t active_time; } remotes[WACOM_MAX_REMOTES ]; };
drivers/hid/wacom_sys.c +21 -4
@@ -2529,6 +2529,18 @@ fail:return ; } +static void wacom_remote_destroy_battery (struct wacom *wacom,int index) +{ +struct wacom_remote *remote = wacom->remote; + +if (remote->remotes[index].battery.battery) { +devres_release_group (&wacom->hdev->dev, + &remote->remotes[index].battery.bat_desc); + remote->remotes[index].battery.battery =NULL ; + remote->remotes[index].active_time =0 ; + } +} +static void wacom_remote_destroy_one (struct wacom *wacom,unsigned int index) {struct wacom_remote *remote = wacom->remote;
@@ -2543,9 +2555,7 @@ static void wacom_remote_destroy_one(str remote->remotes[i].registered = false;spin_unlock_irqrestore (&remote->remote_lock, flags); -if (remote->remotes[i].battery.battery) -devres_release_group (&wacom->hdev->dev, - &remote->remotes[i].battery.bat_desc); +wacom_remote_destroy_battery (wacom, i);if (remote->remotes[i].group.name) devres_release_group(&wacom->hdev->dev,
@@ -2553,7 +2563,6 @@ static void wacom_remote_destroy_one(str remote->remotes[i].serial =0 ; remote->remotes[i].group.name =NULL ; - remote->remotes[i].battery.battery =NULL ; wacom->led.groups[i].select =WACOM_STATUS_UNKNOWN ; } }
@@ -2638,6 +2647,9 @@ static int wacom_remote_attach_battery(sif (remote->remotes[index].battery.battery)return 0 ; +if (!remote->remotes[index].active_time) +return 0 ; +if (wacom->led.groups[index].select ==WACOM_STATUS_UNKNOWN )return 0 ;
@@ -2653,6 +2665,7 @@ static void wacom_remote_work(struct wor { struct wacom *wacom = container_of(work, struct wacom, remote_work);struct wacom_remote *remote = wacom->remote; +ktime_t kt =ktime_get ();struct wacom_remote_data data;unsigned long flags;unsigned int count;
@@ -2679,6 +2692,10 @@ static void wacom_remote_work(struct wor serial = data.remote[i].serial;if (data.remote[i].connected) { +if (kt - remote->remotes[i].active_time >WACOM_REMOTE_BATTERY_TIMEOUT + && remote->remotes[i].active_time !=0 ) +wacom_remote_destroy_battery (wacom, i); +if (remote->remotes[i].serial == serial) {wacom_remote_attach_battery (wacom, i);continue ;
drivers/hid/wacom_wac.c +1 -0
@@ -1127,6 +1127,7 @@ static int wacom_remote_irq(struct wacomif (index <0 || !remote->remotes[index].registered) goto out; + remote->remotes[i].active_time =ktime_get (); input = remote->remotes[index].input;input_report_key (input,BTN_0 , (data[9 ] &0x01 ));
drivers/hid/wacom_wac.h +1 -0
@@ -15,6 +15,7 @@#define WACOM_NAME_MAX 64#define WACOM_MAX_REMOTES 5#define WACOM_STATUS_UNKNOWN 255 +#define WACOM_REMOTE_BATTERY_TIMEOUT 21000000000ll/* packet length for individual models */ #define WACOM_PKGLEN_BBFUN 9
Greg Kroah-Hartman
maintainerPATCH 12/406 staging: rtl8712: fix race condition
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nam Cao <[email protected]>
commit 1422b526fba994cf05fd288a152106563b875fce upstream.
In probe function, request_firmware_nowait() is called to load firmware asynchronously. At completion of firmware loading, register_netdev() is called. However, a mutex needed by netdev is initialized after the call to request_firmware_nowait(). Consequently, it can happen that register_netdev() is called before the driver is ready.
Move the mutex initialization into r8712_init_drv_sw(), which is called before request_firmware_nowait().
--- drivers/staging/rtl8712/os_intfs.c | 1 + drivers/staging/rtl8712/usb_intf.c | 1 - 2 files changed, 1 insertion(+), 1 deletion(-)
drivers/staging/rtl8712/os_intfs.c +1 -0
@@ -323,6 +323,7 @@ int r8712_init_drv_sw(struct _adapter *pmp871xinit (padapter);init_default_value (padapter);r8712_InitSwLeds (padapter); +mutex_init (&padapter->mutex_start);return ret; }
drivers/staging/rtl8712/usb_intf.c +0 -1
@@ -570,7 +570,6 @@ static int r871xu_drv_init(struct usb_inif (rtl871x_load_fw (padapter)) goto deinit_drv_sw;spin_lock_init (&padapter->lock_rx_ff0_filter); -mutex_init (&padapter->mutex_start);return 0 ; deinit_drv_sw:
Greg Kroah-Hartman
maintainerPATCH 13/406 Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zheng Wang <[email protected]>
commit 73f7b171b7c09139eb3c6a5677c200dc1be5f318 upstream.
In btsdio_probe, the data->work is bound with btsdio_work. It will be started in btsdio_send_frame.
If the btsdio_remove runs with a unfinished work, there may be a race condition that hdev is freed but used in btsdio_work. Fix it by canceling the work before do cleanup in btsdio_remove.
--- drivers/bluetooth/btsdio.c | 1 + 1 file changed, 1 insertion(+)
drivers/bluetooth/btsdio.c +1 -0
@@ -355,6 +355,7 @@ static void btsdio_remove(struct sdio_fuif (!data)return ; +cancel_work_sync (&data->work); hdev = data->hdev;sdio_set_drvdata (func,NULL );
Greg Kroah-Hartman
maintainerPATCH 14/406 configfs: fix a race in configfs_lookup()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sishuai Gong <[email protected]>
commit c42dd069be8dfc9b2239a5c89e73bbd08ab35de0 upstream.
When configfs_lookup() is executing list_for_each_entry(), it is possible that configfs_dir_lseek() is calling list_del(). Some unfortunate interleavings of them can cause a kernel NULL pointer dereference error
Thread 1 Thread 2
//configfs_dir_lseek() //configfs_lookup()
list_del(&cursor->s_sibling);
list_for_each_entry(sd, ...)Fix this by grabbing configfs_dirent_lock in configfs_lookup() while iterating ->s_children.
--- fs/configfs/dir.c | 2 ++ 1 file changed, 2 insertions(+)
fs/configfs/dir.c +2 -0
@@ -479,6 +479,7 @@ static struct dentry * configfs_lookup(sif (!configfs_dirent_is_ready (parent_sd)) goto out; +spin_lock (&configfs_dirent_lock);list_for_each_entry (sd, &parent_sd->s_children, s_sibling) {if (sd->s_type &CONFIGFS_NOT_PINNED ) {const unsigned char * name =configfs_get_name (sd);
@@ -491,6 +492,7 @@ static struct dentry * configfs_lookup(sbreak ; } } +spin_unlock (&configfs_dirent_lock);if (!found) {/*
Greg Kroah-Hartman
maintainerPATCH 15/406 serial: qcom-geni: fix opp vote on shutdown
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 8ece7b754bc34ffd7fcc8269ccb9128e72ca76d8 upstream.
The operating-performance-point vote needs to be dropped when shutting down the port to avoid wasting power by keeping resources like power domains in an unnecessarily high performance state (e.g. when a UART connected Bluetooth controller is not in use).
--- drivers/tty/serial/qcom_geni_serial.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/tty/serial/qcom_geni_serial.c +5 -0
@@ -125,6 +125,7 @@ struct qcom_geni_serial_port {u32 tx_fifo_width;u32 rx_fifo_depth;bool setup; +unsigned long clk_rate;int (*handle_rx)(struct uart_port *uport,u32 bytes,bool drop);unsigned int baud;void *rx_fifo;
@@ -1022,6 +1023,7 @@ static void qcom_geni_serial_set_termios goto out_restart_rx; uport->uartclk = clk_rate; + port->clk_rate = clk_rate;dev_pm_opp_set_rate (uport->dev, clk_rate); ser_clk_cfg =SER_CLK_EN ; ser_clk_cfg |= clk_div <<CLK_DIV_SHFT ;
@@ -1305,10 +1307,13 @@ static void qcom_geni_serial_pm(struct uif (new_state ==UART_PM_STATE_ON && old_state ==UART_PM_STATE_OFF ) {geni_icc_enable (&port->se); +if (port->clk_rate) +dev_pm_opp_set_rate (uport->dev, port->clk_rate);geni_se_resources_on (&port->se); }else if (new_state ==UART_PM_STATE_OFF && old_state ==UART_PM_STATE_ON ) {geni_se_resources_off (&port->se); +dev_pm_opp_set_rate (uport->dev,0 );geni_icc_disable (&port->se); } }
Greg Kroah-Hartman
maintainerPATCH 16/406 serial: sc16is7xx: fix broken port 0 uart init
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hugo Villeneuve <[email protected]>
commit 2861ed4d6e6d1a2c9de9bf5b0abd996c2dc673d0 upstream.
The sc16is7xx_config_rs485() function is called only for the second port (index 1, channel B), causing initialization problems for the first port.
For the sc16is7xx driver, port->membase and port->mapbase are not set, and their default values are 0. And we set port->iobase to the device index. This means that when the first device is registered using the uart_add_one_port() function, the following values will be in the port structure:
port->membase = 0
port->mapbase = 0
port->iobase = 0Therefore, the function uart_configure_port() in serial_core.c will exit early because of the following check:
/* * If there isn't a port here, don't do anything further. */ if (!port->iobase && !port->mapbase && !port->membase) return;
Typically, I2C and SPI drivers do not set port->membase and port->mapbase.
The max310x driver sets port->membase to ~0 (all ones). By implementing the same change in this driver, uart_configure_port() is now correctly executed for all ports.
--- drivers/tty/serial/sc16is7xx.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/tty/serial/sc16is7xx.c +6 -0
@@ -1256,6 +1256,12 @@ static int sc16is7xx_probe(struct device s->p[i].port.fifosize =SC16IS7XX_FIFO_SIZE ; s->p[i].port.flags =UPF_FIXED_TYPE |UPF_LOW_LATENCY ; s->p[i].port.iobase = i; +/* +* Use all ones as membase to make sure uart_configure_port() in +* serial_core.c does not abort for SPI/I2C devices where the +* membase address is not applicable. +*/ + s->p[i].port.membase = (void __iomem *)~0 ; s->p[i].port.iotype =UPIO_PORT ; s->p[i].port.uartclk = freq; s->p[i].port.rs485_config = sc16is7xx_config_rs485;
Greg Kroah-Hartman
maintainerPATCH 17/406 serial: sc16is7xx: fix bug when first setting GPIO direction
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hugo Villeneuve <[email protected]>
commit 9baeea723c0fb9c3ba9a336369f758ed9bc6831d upstream.
When configuring a pin as an output pin with a value of logic 0, we end up as having a value of logic 1 on the output pin. Setting a logic 0 a second time (or more) after that will correctly output a logic 0 on the output pin.
By default, all GPIO pins are configured as inputs. When we enter sc16is7xx_gpio_direction_output() for the first time, we first set the desired value in IOSTATE, and then we configure the pin as an output. The datasheet states that writing to IOSTATE register will trigger a transfer of the value to the I/O pin configured as output, so if the pin is configured as an input, nothing will be transferred.
Therefore, set the direction first in IODIR, and then set the desired value in IOSTATE.
This is what is done in NXP application note AN10587.
--- drivers/tty/serial/sc16is7xx.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/tty/serial/sc16is7xx.c +10 -1
@@ -1170,9 +1170,18 @@ static int sc16is7xx_gpio_direction_outp state |=BIT (offset); else state &= ~BIT(offset); -sc16is7xx_port_write (port,SC16IS7XX_IOSTATE_REG , state); + +/* +* If we write IOSTATE first, and then IODIR, the output value is not +* transferred to the corresponding I/O pin. +* The datasheet states that each register bit will be transferred to +* the corresponding I/O pin programmed as output when writing to +* IOSTATE. Therefore, configure direction first with IODIR, and then +* set value after with IOSTATE. +*/ sc16is7xx_port_update (port,SC16IS7XX_IODIR_REG ,BIT (offset),BIT (offset)); +sc16is7xx_port_write (port,SC16IS7XX_IOSTATE_REG , state);return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 18/406 firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wang Ming <[email protected]>
commit dd218433f2b635d97e8fda3eed047151fd528ce4 upstream.
The devm_memremap() function returns error pointers. It never returns NULL. Fix the check.
--- drivers/firmware/stratix10-svc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/firmware/stratix10-svc.c +1 -1
@@ -623,7 +623,7 @@ svc_create_memory_pool(struct platform_d paddr = begin; size = end - begin; va =devm_memremap (dev, paddr, size,MEMREMAP_WC ); -if (!va) { +if (IS_ERR (va)) {dev_err (dev,"fail to remap shared memory\n" );return ERR_PTR (-EINVAL ); }
Greg Kroah-Hartman
maintainerPATCH 19/406 fsi: master-ast-cf: Add MODULE_FIRMWARE macro
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Juerg Haefliger <[email protected]>
commit 3a1d7aff6e65ad6e285e28abe55abbfd484997ee upstream.
The module loads firmware so add a MODULE_FIRMWARE macro to provide that information via modinfo.
--- drivers/fsi/fsi-master-ast-cf.c | 1 + 1 file changed, 1 insertion(+)
drivers/fsi/fsi-master-ast-cf.c +1 -0
@@ -1440,3 +1440,4 @@ static struct platform_driver fsi_mastermodule_platform_driver (fsi_master_acf);MODULE_LICENSE ("GPL" ); +MODULE_FIRMWARE (FW_FILE_NAME );
Greg Kroah-Hartman
maintainerPATCH 2/406 ARM: pxa: remove use of symbol_get()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 0faa29c4207e6e29cfc81b427df60e326c37083a upstream.
The spitz board file uses the obscure symbol_get() function to optionally call a function from sharpsl_pm.c if that is built. However, the two files are always built together these days, and have been for a long time, so this can be changed to a normal function call.
--- arch/arm/mach-pxa/sharpsl_pm.c | 2 -- arch/arm/mach-pxa/spitz.c | 14 +------------- 2 files changed, 1 insertion(+), 15 deletions(-)
arch/arm/mach-pxa/sharpsl_pm.c +0 -2
@@ -220,8 +220,6 @@ void sharpsl_battery_kick(void) {schedule_delayed_work (&sharpsl_bat,msecs_to_jiffies (125 )); } -EXPORT_SYMBOL (sharpsl_battery_kick); -static void sharpsl_battery_thread (struct work_struct *private_) {
arch/arm/mach-pxa/spitz.c +1 -13
@@ -9,7 +9,6 @@*/ #include <linux/kernel.h> -#include <linux/module.h> /* symbol_get ; symbol_put */ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/gpio_keys.h>
@@ -514,17 +513,6 @@ static struct pxa2xx_spi_chip spitz_ads7 .gpio_cs = SPITZ_GPIO_ADS7846_CS, }; -static void spitz_bl_kick_battery (void ) -{ -void (*kick_batt)(void ); - - kick_batt =symbol_get (sharpsl_battery_kick); -if (kick_batt) { -kick_batt (); -symbol_put (sharpsl_battery_kick); - } -} -static struct gpiod_lookup_table spitz_lcdcon_gpio_table = { .dev_id ="spi2.1" , .table = {
@@ -552,7 +540,7 @@ static struct corgi_lcd_platform_data sp .max_intensity = 0x2f, .default_intensity = 0x1f, .limit_mask = 0x0b, - .kick_battery = spitz_bl_kick_battery, + .kick_battery = sharpsl_battery_kick, };static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
Greg Kroah-Hartman
maintainerPATCH 3/406 mmc: au1xmmc: force non-modular build and remove symbol_get usage
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Hellwig <[email protected]>
commit d4a5c59a955bba96b273ec1a5885bada24c56979 upstream.
au1xmmc is split somewhat awkwardly into the main mmc subsystem driver, and callbacks in platform_data that sit under arch/mips/ and are always built in. The latter than call mmc_detect_change through symbol_get. Remove the use of symbol_get by requiring the driver to be built in. In the future the interrupt handlers for card insert/eject detection should probably be moved into the main driver, and which point it can be built modular again.
--- arch/mips/alchemy/devboards/db1000.c | 8 +------- arch/mips/alchemy/devboards/db1200.c | 19 ++----------------- arch/mips/alchemy/devboards/db1300.c | 10 +--------- drivers/mmc/host/Kconfig | 5 +++-- 4 files changed, 7 insertions(+), 35 deletions(-)
arch/mips/alchemy/devboards/db1000.c +1 -7
@@ -14,7 +14,6 @@#include <linux/interrupt.h> #include <linux/leds.h> #include <linux/mmc/host.h> -#include <linux/module.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/spi/spi.h>
@@ -167,12 +166,7 @@ static struct platform_device db1x00_audstatic irqreturn_t db1100_mmc_cd (int irq,void *ptr) { -void (*mmc_cd)(struct mmc_host *,unsigned long ); -/* link against CONFIG_MMC=m */ - mmc_cd =symbol_get (mmc_detect_change); -mmc_cd (ptr,msecs_to_jiffies (500 )); -symbol_put (mmc_detect_change); - +mmc_detect_change (ptr,msecs_to_jiffies (500 ));return IRQ_HANDLED ; }
arch/mips/alchemy/devboards/db1200.c +2 -17
@@ -10,7 +10,6 @@#include <linux/gpio.h> #include <linux/i2c.h> #include <linux/init.h> -#include <linux/module.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/leds.h>
@@ -340,14 +339,7 @@ static irqreturn_t db1200_mmc_cd(int irqstatic irqreturn_t db1200_mmc_cdfn (int irq,void *ptr) { -void (*mmc_cd)(struct mmc_host *,unsigned long ); - -/* link against CONFIG_MMC=m */ - mmc_cd =symbol_get (mmc_detect_change); -if (mmc_cd) { -mmc_cd (ptr,msecs_to_jiffies (200 )); -symbol_put (mmc_detect_change); - } +mmc_detect_change (ptr,msecs_to_jiffies (200 ));msleep (100 );/* debounce */ if (irq ==DB1200_SD0_INSERT_INT )
@@ -431,14 +423,7 @@ static irqreturn_t pb1200_mmc1_cd(int irstatic irqreturn_t pb1200_mmc1_cdfn (int irq,void *ptr) { -void (*mmc_cd)(struct mmc_host *,unsigned long ); - -/* link against CONFIG_MMC=m */ - mmc_cd =symbol_get (mmc_detect_change); -if (mmc_cd) { -mmc_cd (ptr,msecs_to_jiffies (200 )); -symbol_put (mmc_detect_change); - } +mmc_detect_change (ptr,msecs_to_jiffies (200 ));msleep (100 );/* debounce */ if (irq ==PB1200_SD1_INSERT_INT )
arch/mips/alchemy/devboards/db1300.c +1 -9
@@ -17,7 +17,6 @@#include <linux/interrupt.h> #include <linux/ata_platform.h> #include <linux/mmc/host.h> -#include <linux/module.h> #include <linux/mtd/mtd.h> #include <linux/mtd/platnand.h> #include <linux/platform_device.h>
@@ -459,14 +458,7 @@ static irqreturn_t db1300_mmc_cd(int irqstatic irqreturn_t db1300_mmc_cdfn (int irq,void *ptr) { -void (*mmc_cd)(struct mmc_host *,unsigned long ); - -/* link against CONFIG_MMC=m. We can only be called once MMC core has -* initialized the controller, so symbol_get() should always succeed. -*/ - mmc_cd =symbol_get (mmc_detect_change); -mmc_cd (ptr,msecs_to_jiffies (200 )); -symbol_put (mmc_detect_change); +mmc_detect_change (ptr,msecs_to_jiffies (200 ));msleep (100 );/* debounce */ if (irq ==DB1300_SD1_INSERT_INT )
drivers/mmc/host/Kconfig +3 -2
@@ -520,11 +520,12 @@ config MMC_ALCOR of Alcor Micro PCI-E card reader config MMC_AU1X - tristate "Alchemy AU1XX0 MMC Card Interface support" + bool "Alchemy AU1XX0 MMC Card Interface support" depends on MIPS_ALCHEMY + depends on MMC=y help This selects the AMD Alchemy(R) Multimedia card interface. - If you have a Alchemy platform with a MMC slot, say Y or M here. + If you have a Alchemy platform with a MMC slot, say Y here. If unsure, say N.
Greg Kroah-Hartman
maintainerPATCH 4/406 net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Hellwig <[email protected]>
commit 569820befb16ffc755ab7af71f4f08cc5f68f0fe upstream.
enetc_phc_index is only used via symbol_get, which was only ever intended for very internal symbols like this one. Use EXPORT_SYMBOL_GPL for it so that symbol_get can enforce only being used on EXPORT_SYMBOL_GPL symbols.
--- drivers/net/ethernet/freescale/enetc/enetc_ptp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/freescale/enetc/enetc_ptp.c +1 -1
@@ -8,7 +8,7 @@#include "enetc.h" int enetc_phc_index =-1 ; -EXPORT_SYMBOL (enetc_phc_index); +EXPORT_SYMBOL_GPL (enetc_phc_index);static struct ptp_clock_info enetc_ptp_caps = { .owner =THIS_MODULE ,
Greg Kroah-Hartman
maintainerPATCH 5/406 rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Hellwig <[email protected]>
commit 95e7ebc6823170256a8ce19fad87912805bfa001 upstream.
ds1685_rtc_poweroff is only used externally via symbol_get, which was only ever intended for very internal symbols like this one. Use EXPORT_SYMBOL_GPL for it so that symbol_get can enforce only being used on EXPORT_SYMBOL_GPL symbols.
--- drivers/rtc/rtc-ds1685.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/rtc/rtc-ds1685.c +1 -1
@@ -1441,7 +1441,7 @@ ds1685_rtc_poweroff(struct platform_deviunreachable (); } } -EXPORT_SYMBOL (ds1685_rtc_poweroff); +EXPORT_SYMBOL_GPL (ds1685_rtc_poweroff);/* ----------------------------------------------------------------------- */
Greg Kroah-Hartman
maintainerPATCH 6/406 modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Hellwig <[email protected]>
commit 9011e49d54dcc7653ebb8a1e05b5badb5ecfa9f9 upstream.
It has recently come to my attention that nvidia is circumventing the protection added in 262e6ae7081d ("modules: inherit TAINT_PROPRIETARY_MODULE") by importing exports from their proprietary modules into an allegedly GPL licensed module and then rexporting them.
Given that symbol_get was only ever intended for tightly cooperating modules using very internal symbols it is logical to restrict it to being used on EXPORT_SYMBOL_GPL and prevent nvidia from costly DMCA Circumvention of Access Controls law suites.
All symbols except for four used through symbol_get were already exported as EXPORT_SYMBOL_GPL, and the remaining four ones were switched over in the preparation patches.
--- kernel/module.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)
kernel/module.c +13 -2
@@ -2268,15 +2268,26 @@ static void free_module(struct module *mvoid *__symbol_get (const char *symbol) {struct module *owner; +enum mod_license license;const struct kernel_symbol *sym;preempt_disable (); - sym =find_symbol (symbol, &owner,NULL ,NULL , true, true); -if (sym &&strong_try_module_get (owner)) + sym =find_symbol (symbol, &owner,NULL , &license, true, true); +if (!sym) + goto fail; +if (license !=GPL_ONLY ) { +pr_warn ("failing symbol_get of non-GPLONLY symbol %s.\n" , + symbol); + goto fail; + } +if (strong_try_module_get (owner)) sym =NULL ;preempt_enable ();return sym ? (void *)kernel_symbol_value (sym) :NULL ; +fail: +preempt_enable (); +return NULL ; }EXPORT_SYMBOL_GPL (__symbol_get);
Greg Kroah-Hartman
maintainerPATCH 7/406 USB: serial: option: add Quectel EM05G variant (0x030e)
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Kohn <[email protected]>
commit 873854c02364ebb991fc06f7148c14dfb5419e1b upstream.
Add Quectel EM05G with product ID 0x030e.
Interface 4 is used for qmi.
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030e Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
--- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/usb/serial/option.c +3 -0
@@ -259,6 +259,7 @@ static void option_instat_callback(struc#define QUECTEL_PRODUCT_EM05G 0x030a#define QUECTEL_PRODUCT_EM060K 0x030b#define QUECTEL_PRODUCT_EM05G_CS 0x030c +#define QUECTEL_PRODUCT_EM05GV2 0x030e#define QUECTEL_PRODUCT_EM05CN_SG 0x0310#define QUECTEL_PRODUCT_EM05G_SG 0x0311#define QUECTEL_PRODUCT_EM05CN 0x0312
@@ -1190,6 +1191,8 @@ static const struct usb_device_id option .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_GR, 0xff), .driver_info = RSVD(6) | ZLP }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05GV2, 0xff), + .driver_info = RSVD(4) | ZLP }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_CS, 0xff), .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_RS, 0xff),
Greg Kroah-Hartman
maintainerPATCH 8/406 USB: serial: option: add FOXCONN T99W368/T99W373 product
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Slark Xiao <[email protected]>
commit 4d9488b294e1f8353bbcadc4c7172a7f7490199b upstream.
The difference of T99W368 and T99W373 is the chip solution. T99W368 is designed based on Qualcomm SDX65 and T99W373 is SDX62.
Test evidence as below:
T: Bus=01 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f0 Rev=05.04 S: Manufacturer=FII S: Product=OLYMPIC USB WWAN Adapter S: SerialNumber=78ada8c4 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
T: Bus=01 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0ee Rev=05.04 S: Manufacturer=FII S: Product=OLYMPIC USB WWAN Adapter S: SerialNumber=78ada8d5 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
Both of them share the same port configuration:
0&1: MBIM, 2: Modem, 3:GNSS, 4:NMEA, 5:Diag
GNSS port don't use serial driver.
--- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/usb/serial/option.c +4 -0
@@ -2235,6 +2235,10 @@ static const struct usb_device_id option .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff), /* Foxconn T99W265 MBIM */ .driver_info = RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0ee, 0xff), /* Foxconn T99W368 MBIM */ + .driver_info = RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0f0, 0xff), /* Foxconn T99W373 MBIM */ + .driver_info = RSVD(3) }, { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 (IOT version) */ .driver_info = RSVD(4) | RSVD(5) | RSVD(6) }, { USB_DEVICE(0x1782, 0x4d10) }, /* Fibocom L610 (AT mode) */
Greg Kroah-Hartman
maintainerPATCH 9/406 usb: dwc3: meson-g12a: do post init to fix broken usb after resumption
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Luke Lu <[email protected]>
commit 1fa206bb764f37d2ab4bf671e483153ef0659b34 upstream.
Device connected to usb otg port of GXL-based boards can not be recognised after resumption, doesn't recover even if disconnect and reconnect the device. dmesg shows it disconnects during resumption.
[ 41.492911] usb 1-2: USB disconnect, device number 3 [ 41.499346] usb 1-2: unregistering device [ 41.511939] usb 1-2: unregistering interface 1-2:1.0
Calling usb_post_init() will fix this issue, and it's tested and verified on libretech's aml-s905x-cc board.
--- drivers/usb/dwc3/dwc3-meson-g12a.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/usb/dwc3/dwc3-meson-g12a.c +6 -0
@@ -931,6 +931,12 @@ static int __maybe_unused dwc3_meson_g12return ret; } +if (priv->drvdata->usb_post_init) { + ret = priv->drvdata->usb_post_init (priv); +if (ret) +return ret; + } +return 0 ; }
Greg Kroah-Hartman
maintainercover 5.10.195-rc1 review
This is the start of the stable review cycle for the 5.10.195 release. There are 406 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Tue, 19 Sep 2023 19:10:04 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.195-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.10.195-rc1
Helge Deller <[email protected]>
parisc: Drop loops_per_jiffy from per_cpu struct
Wesley Chalmers <[email protected]>
drm/amd/display: Fix a bug when searching for insert_above_mpcc
Kuniyuki Iwashima <[email protected]>
kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg().
Vadim Fedorenko <[email protected]>
ixgbe: fix timestamp configuration code
Eric Dumazet <[email protected]>
ipv6: fix ip6_sock_set_addr_preferences() typo
Liu Jian <[email protected]>
net/tls: do not free tls_rec on async operation in bpf_exec_tx_verdict()
Liming Sun <[email protected]>
platform/mellanox: mlxbf-tmfifo: Drop jumbo frames
Liming Sun <[email protected]>
platform/mellanox: mlxbf-tmfifo: Drop the Rx packet if no more descriptors
Shigeru Yoshida <[email protected]>
kcm: Fix memory leak in error path of kcm_sendmsg()
Hayes Wang <[email protected]>
r8152: check budget for r8152_poll()
Ziyang Xuan <[email protected]>
hsr: Fix uninit-value access in fill_frame_info()
Hangyu Hua <[email protected]>
net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_hwlro_get_fdir_all()
Hangyu Hua <[email protected]>
net: ethernet: mvpp2_main: fix possible OOB write in mvpp2_ethtool_get_rxnfc()
Guangguan Wang <[email protected]>
net/smc: use smc_lgr_list.lock to protect smc_lgr_list.list iterate in smcr_port_add
Björn Töpel <[email protected]>
kselftest/runner.sh: Propagate SIGTERM to runner child
SeongJae Park <[email protected]>
selftests/kselftest/runner/run_one(): allow running non-executable files
Liu Jian <[email protected]>
net: ipv4: fix one memleak in __inet_del_ifa()
Qiang Yu <[email protected]>
bus: mhi: host: Skip MHI reset if device is in RDDM
Aleksey Nasibulin <[email protected]>
ARM: dts: BCM5301X: Extend RAM to full 256MB for Linksys EA6500 V2
Paul Cercueil <[email protected]>
ARM: dts: samsung: exynos4210-i9100: Fix LCD screen's physical size
Quinn Tran <[email protected]>
scsi: qla2xxx: Flush mailbox commands on chip reset
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix crash in PCIe error handling
Quinn Tran <[email protected]>
scsi: qla2xxx: Consolidate zio threshold setting for both FCP & NVMe
Saurav Kashyap <[email protected]>
scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry
D Scott Phillips <[email protected]>
arm64: sdei: abort running SDEI handlers during crash
Shuai Xue <[email protected]>
ACPI: APEI: explicit init of HEST and GHES in apci_init()
Namhyung Kim <[email protected]>
perf hists browser: Fix the number of entries for 'e' key
Namhyung Kim <[email protected]>
perf tools: Handle old data in PERF_RECORD_ATTR
Namhyung Kim <[email protected]>
perf hists browser: Fix hierarchy mode header
Hamza Mahfooz <[email protected]>
drm/amd/display: prevent potential division by zero errors
William Zhang <[email protected]>
mtd: rawnand: brcmnand: Fix potential false time out warning
William Zhang <[email protected]>
mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write
William Zhang <[email protected]>
mtd: rawnand: brcmnand: Fix crash during the panic_write
Anand Jain <[email protected]>
btrfs: use the correct superblock to compare fsid in btrfs_validate_super
Filipe Manana <[email protected]>
btrfs: don't start transaction when joining with TRANS_JOIN_NOSTART
ruanmeisi <[email protected]>
fuse: nlookup missing decrement in fuse_direntplus_link
Damien Le Moal <[email protected]>
ata: pata_ftide010: Add missing MODULE_DESCRIPTION
Damien Le Moal <[email protected]>
ata: sata_gemini: Add missing MODULE_DESCRIPTION
Wang Jianjian <[email protected]>
ext4: add correct group descriptors and reserved GDT blocks to system zone
Petr Tesarik <[email protected]>
sh: boards: Fix CEU buffer size passed to dma_declare_coherent_memory()
Yisen Zhuang <[email protected]>
net: hns3: fix the port information display when sfp is absent
Wander Lairson Costa <[email protected]>
netfilter: nfnetlink_osf: avoid OOB read
Vladimir Oltean <[email protected]>
net: dsa: sja1105: fix -ENOSPC when replacing the same tc-cbs too many times
Vladimir Oltean <[email protected]>
net: dsa: sja1105: fix bandwidth discrepancy between tc-cbs software and offload
Eric Dumazet <[email protected]>
ip_tunnels: use DEV_STATS_INC()
Ariel Marcovitch <[email protected]>
idr: fix param name in idr_alloc_cyclic() doc
Andy Shevchenko <[email protected]>
s390/zcrypt: don't leak memory if dev_set_name() fails
Olga Zaborska <[email protected]>
igb: Change IGB_MIN to allow set rx/tx value between 64 and 80
Olga Zaborska <[email protected]>
igbvf: Change IGBVF_MIN to allow set rx/tx value between 64 and 80
Olga Zaborska <[email protected]>
igc: Change IGC_MIN to allow set rx/tx value between 64 and 80
Shigeru Yoshida <[email protected]>
kcm: Destroy mutex in kcm_exit_net()
valis <[email protected]>
net: sched: sch_qfq: Fix UAF in qfq_dequeue()
Kuniyuki Iwashima <[email protected]>
af_unix: Fix data race around sk->sk_err.
Kuniyuki Iwashima <[email protected]>
af_unix: Fix data-races around sk->sk_shutdown.
Kuniyuki Iwashima <[email protected]>
af_unix: Fix data-race around unix_tot_inflight.
Kuniyuki Iwashima <[email protected]>
af_unix: Fix data-races around user->unix_inflight.
Alex Henrie <[email protected]>
net: ipv6/addrconf: avoid integer underflow in ipv6_create_tempaddr
Liang Chen <[email protected]>
veth: Fixing transmit return status for dropped packets
Corinna Vinschen <[email protected]>
igb: disable virtualization features on 82580
Sriram Yagnaraman <[email protected]>
ipv4: ignore dst hint for multipath routes
Sean Christopherson <[email protected]>
drm/i915/gvt: Drop unused helper intel_vgpu_reset_gtt()
Colin Xu <[email protected]>
drm/i915/gvt: Save/restore HW status to support GVT suspend/resume
Eric Dumazet <[email protected]>
net: read sk->sk_family once in sk_mc_loop()
Eric Dumazet <[email protected]>
ipv4: annotate data-races around fi->fib_dead
Eric Dumazet <[email protected]>
sctp: annotate data-races around sk->sk_wmem_queued
Eric Dumazet <[email protected]>
net/sched: fq_pie: avoid stalls in fq_pie_timer()
Vladimir Zapolskiy <[email protected]>
pwm: lpc32xx: Remove handling of PWM channels
Raag Jadav <[email protected]>
watchdog: intel-mid_wdt: add MODULE_ALIAS() to allow auto-load
Arnaldo Carvalho de Melo <[email protected]>
perf top: Don't pass an ERR_PTR() directly to perf_session__delete()
Sean Christopherson <[email protected]>
x86/virt: Drop unnecessary check on extended CPUID level in cpu_has_svm()
Arnaldo Carvalho de Melo <[email protected]>
perf annotate bpf: Don't enclose non-debug code with an assert()
Ying Liu <[email protected]>
backlight: gpio_backlight: Drop output GPIO direction check for initial power state
Konstantin Meskhidze <[email protected]>
kconfig: fix possible buffer overflow
Fedor Pchelkin <[email protected]>
NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
Trond Myklebust <[email protected]>
NFS: Fix a potential data corruption
Chris Lew <[email protected]>
soc: qcom: qmi_encdec: Restrict string length in decode
Dmitry Baryshkov <[email protected]>
clk: qcom: gcc-mdm9615: use proper parent for pll0_vote clock
Ahmad Fatoum <[email protected]>
clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz
Krzysztof Kozlowski <[email protected]>
dt-bindings: clock: xlnx,versal-clk: drop select:false
Raag Jadav <[email protected]>
pinctrl: cherryview: fix address_space_handler() argument
Helge Deller <[email protected]>
parisc: led: Reduce CPU overhead for disk & lan LED computation
Helge Deller <[email protected]>
parisc: led: Fix LAN receive and transmit LEDs
Andrew Donnellan <[email protected]>
lib/test_meminit: allocate pages up to order MAX_ORDER
Thomas Zimmermann <[email protected]>
drm/ast: Fix DRAM init on AST2200
Thomas Zimmermann <[email protected]>
fbdev/ep93xx-fb: Do not assign to struct fb_info.dev
Manish Rangankar <[email protected]>
scsi: qla2xxx: Remove unsupported ql2xenabledif option
Quinn Tran <[email protected]>
scsi: qla2xxx: Turn off noisy message log
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix erroneous link up failure
Quinn Tran <[email protected]>
scsi: qla2xxx: fix inconsistent TMF timeout
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix deletion race condition
Pavel Begunkov <[email protected]>
io_uring: break iopolling on signal
Pavel Begunkov <[email protected]>
io_uring: break out of iowq iopoll on teardown
Pavel Begunkov <[email protected]>
io_uring: always lock in io_apoll_task_func
Quan Tian <[email protected]>
net/ipv6: SKB symmetric hash should incorporate transport ports
Tom Rix <[email protected]>
udf: initialize newblock to 0
Yu Kuai <[email protected]>
md/md-bitmap: remove unnecessary local variable in backlog_store()
Brian Foster <[email protected]>
tracing: Zero the pipe cpumask on alloc to avoid spurious -EBUSY
Marco Felsch <[email protected]>
usb: typec: tcpci: clear the fault status bit
Alan Stern <[email protected]>
USB: core: Fix oversight in SuperSpeed initialization
Alan Stern <[email protected]>
USB: core: Fix race by not overwriting udev->descriptor in hub_port_init()
Alan Stern <[email protected]>
USB: core: Change usb_get_device_descriptor() API
Alan Stern <[email protected]>
USB: core: Unite old scheme and new scheme descriptor reads
RD Babiera <[email protected]>
usb: typec: bus: verify partner exists in typec_altmode_attention
Gustavo A. R. Silva <[email protected]>
cpufreq: brcmstb-avs-cpufreq: Fix -Warray-bounds bug
Thomas Bourgoin <[email protected]>
crypto: stm32 - fix loop iterating through scatterlist for DMA
Sven Schnelle <[email protected]>
s390/ipl: add missing secure/has_secure file to ipl type 'unknown'
Enlin Mu <[email protected]>
pstore/ram: Check start of empty przs during init
Eric Biggers <[email protected]>
fsverity: skip PKCS#7 parser when keyring is empty
Nicolas Dichtel <[email protected]>
net: handle ARPHRD_PPP in dev_is_mac_header_xmit()
Thore Sommer <[email protected]>
X.509: if signature is unsupported skip validation
Jann Horn <[email protected]>
dccp: Fix out of bounds access in DCCP error handler
Alexander Aring <[email protected]>
dlm: fix plock lookup when using multiple lockspaces
Yafang Shao <[email protected]>
bpf: Fix issue in verifying allow_ptr_leaks
Helge Deller <[email protected]>
parisc: Fix /proc/cpuinfo output for lscpu
Aleksa Sarai <[email protected]>
procfs: block chmod on /proc/thread-self/comm
Bjorn Helgaas <[email protected]>
Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset"
Dave Jiang <[email protected]>
ntb: Fix calculation ntb_transport_tx_free_entry()
Dave Jiang <[email protected]>
ntb: Clean up tx tail index on link down
Dave Jiang <[email protected]>
ntb: Drop packets when qp link is down
Ranjan Kumar <[email protected]>
scsi: mpt3sas: Perform additional retries if doorbell read returns 0
Nilesh Javali <[email protected]>
Revert "scsi: qla2xxx: Fix buffer overrun"
Greg Kroah-Hartman <[email protected]>
media: dvb: symbol fixup for dvb_attach()
Will Deacon <[email protected]>
arm64: csum: Fix OoB access in IP checksum code for negative lengths
Max Filippov <[email protected]>
xtensa: PMU: fix base address for the newer hardware
Thomas Zimmermann <[email protected]>
backlight/lv5207lp: Compare against struct fb_info.device
Thomas Zimmermann <[email protected]>
backlight/bd6107: Compare against struct fb_info.device
Thomas Zimmermann <[email protected]>
backlight/gpio_backlight: Compare against struct fb_info.device
Gustavo A. R. Silva <[email protected]>
ARM: OMAP2+: Fix -Warray-bounds warning in _pwrdm_state_switch()
Yi Yang <[email protected]>
ipmi_si: fix a memleak in try_smi_init()
Bart Van Assche <[email protected]>
scsi: core: Fix the scsi_set_resid() documentation
Kees Cook <[email protected]>
printk: ringbuffer: Fix truncating buffer size min_t cast
Takashi Iwai <[email protected]>
ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
Boris Brezillon <[email protected]>
PM / devfreq: Fix leak in devfreq_dev_release()
Radoslaw Tyl <[email protected]>
igb: set max size RX buffer when store bad packet is enabled
Mohamed Khalfella <[email protected]>
skbuff: skb_segment, Call zero copy functions before using skbuff frags
Wander Lairson Costa <[email protected]>
netfilter: xt_sctp: validate the flag_info count
Wander Lairson Costa <[email protected]>
netfilter: xt_u32: validate user space input
Kyle Zeng <[email protected]>
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
Eric Dumazet <[email protected]>
igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
Yuan Yao <[email protected]>
virtio_ring: fix avail_wrap_counter in virtqueue_add_packed
Liao Chang <[email protected]>
cpufreq: Fix the race condition while updating the transition_task of policy
ruanjinjie <[email protected]>
dmaengine: ste_dma40: Add missing IRQ check in d40_probe
Randy Dunlap <[email protected]>
um: Fix hostaudio build errors
Yi Yang <[email protected]>
mtd: rawnand: fsmc: handle clk prepare error in fsmc_nand_resume()
Hsin-Yi Wang <[email protected]>
mtd: spi-nor: Check bus width while setting QE bit
Marek Behún <[email protected]>
leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false
Jiasheng Jiang <[email protected]>
rpmsg: glink: Add check for kstrdup
Jonas Karlman <[email protected]>
phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write
Zheng Yang <[email protected]>
phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rate
Jonas Karlman <[email protected]>
phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328
William Zhang <[email protected]>
mtd: rawnand: brcmnand: Fix mtd oobsize
Zheng Yejian <[email protected]>
tracing: Fix race issue between cpu buffer write and swap
Dave Hansen <[email protected]>
x86/speculation: Mark all Skylake CPUs as vulnerable to GDS
Rahul Rameshbabu <[email protected]>
HID: multitouch: Correct devm device reference for hidinput input_dev name
Nikita Zhandarovich <[email protected]>
HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()
Guoqing Jiang <[email protected]>
RDMA/siw: Correct wrong debug message
Guoqing Jiang <[email protected]>
RDMA/siw: Balance the reference of cep->kref in the error path
Leon Romanovsky <[email protected]>
Revert "IB/isert: Fix incorrect release of isert connection"
Peng Fan <[email protected]>
amba: bus: fix refcount leak
Yi Yang <[email protected]>
serial: tegra: handle clk prepare error in tegra_uart_hw_init()
Chengfeng Ye <[email protected]>
scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock
Tony Battersby <[email protected]>
scsi: core: Use 32-bit hostnum in scsi_host_lookup()
Lu Jialin <[email protected]>
cgroup:namespace: Remove unused cgroup_namespaces_init()
Hans de Goede <[email protected]>
media: ov2680: Fix regulators being left enabled on ov2680_power_on() errors
Hans de Goede <[email protected]>
media: ov2680: Fix vflip / hflip set functions
Hans de Goede <[email protected]>
media: ov2680: Fix ov2680_bayer_order()
Hans de Goede <[email protected]>
media: ov2680: Remove auto-gain and auto-exposure controls
Dave Stevenson <[email protected]>
media: i2c: ov2680: Set V4L2_CTRL_FLAG_MODIFY_LAYOUT on flips
Marek Vasut <[email protected]>
media: ov5640: Enable MIPI interface in ov5640_set_power_mipi()
Alan Stern <[email protected]>
USB: gadget: f_mass_storage: Fix unused variable warning
Colin Ian King <[email protected]>
media: go7007: Remove redundant if statement
Yanfei Xu <[email protected]>
iommu/vt-d: Fix to flush cache of PASID directory table
AngeloGioacchino Del Regno <[email protected]>
iommu/qcom: Disable and reset context bank before programming
Eddie James <[email protected]>
fsi: aspeed: Reset master errors after CFAM reset
Xiang Yang <[email protected]>
IB/uverbs: Fix an potential error pointer dereference
Dan Carpenter <[email protected]>
driver core: test_async: fix an error code
Rob Clark <[email protected]>
dma-buf/sync_file: Fix docs syntax
Ruidong Tian <[email protected]>
coresight: tmc: Explicit type conversions to prevent integer overflow
Oleksandr Natalenko <[email protected]>
scsi: qedf: Do not touch __user pointer in qedf_dbg_fp_int_cmd_read() directly
Oleksandr Natalenko <[email protected]>
scsi: qedf: Do not touch __user pointer in qedf_dbg_debug_cmd_read() directly
Oleksandr Natalenko <[email protected]>
scsi: qedf: Do not touch __user pointer in qedf_dbg_stop_io_on_error_cmd_read() directly
Randy Dunlap <[email protected]>
x86/APM: drop the duplicate APM_MINOR_DEV macro
Chunyan Zhang <[email protected]>
serial: sprd: Fix DMA buffer leak issue
Chunyan Zhang <[email protected]>
serial: sprd: Assign sprd_port after initialized to avoid wrong access
Lin Ma <[email protected]>
scsi: qla4xxx: Add length check when parsing nlattrs
Lin Ma <[email protected]>
scsi: be2iscsi: Add length check when parsing nlattrs
Lin Ma <[email protected]>
scsi: iscsi: Add strlen() check in iscsi_if_set{_host}_param()
Lin Ma <[email protected]>
scsi: iscsi: Add length check for nlattr payload
Wenchao Hao <[email protected]>
scsi: iscsi: Rename iscsi_set_param() to iscsi_if_set_param()
Bart Van Assche <[email protected]>
scsi: RDMA/srp: Fix residual handling
Xu Yang <[email protected]>
usb: phy: mxs: fix getting wrong state with mxs_phy_is_otg_host()
Irui Wang <[email protected]>
media: mediatek: vcodec: Return NULL if no vdec_fb is found
Benjamin Gaignard <[email protected]>
media: rkvdec: increase max supported height for H.264
Xingui Yang <[email protected]>
scsi: hisi_sas: Fix normally completed I/O analysed as failed
Xingui Yang <[email protected]>
scsi: hisi_sas: Fix warnings detected by sparse
Xingui Yang <[email protected]>
scsi: hisi_sas: Modify v3 HW SATA completion error processing
Xingui Yang <[email protected]>
scsi: hisi_sas: Modify v3 HW SSP underflow error processing
Bart Van Assche <[email protected]>
scsi: libsas: Introduce more SAM status code aliases in enum exec_status
Luo Jiaxing <[email protected]>
scsi: hisi_sas: Print SAS address for v3 hw erroneous completion print
Daniil Dulov <[email protected]>
media: cx24120: Add retval check for cx24120_message_send()
Christophe JAILLET <[email protected]>
media: dvb-usb: m920x: Fix a potential memory leak in m920x_i2c_xfer()
Daniil Dulov <[email protected]>
media: dib7000p: Fix potential division by zero
Dongliang Mu <[email protected]>
drivers: usb: smsusb: fix error handling code in smsusb_init_device
Christophe JAILLET <[email protected]>
media: v4l2-core: Fix a potential resource leak in v4l2_fwnode_parse_link()
Claudiu Beznea <[email protected]>
media: i2c: tvp5150: check return value of devm_kasprintf()
Hans de Goede <[email protected]>
media: ad5820: Drop unsupported ad5823 from i2c_ and of_device_id tables
Olga Kornievskaia <[email protected]>
NFSv4.2: fix handling of COPY ERR_OFFLOAD_NO_REQ
Benjamin Coddington <[email protected]>
NFS: Guard against READDIR loop when entry names exceed MAXNAMELEN
Chuck Lever <[email protected]>
NFSD: da_addr_body field missing in some GETDEVICEINFO replies
Su Hui <[email protected]>
fs: lockd: avoid possible wrong NULL parameter
Alexei Filippov <[email protected]>
jfs: validate max amount of blocks before allocation.
Russell Currey <[email protected]>
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
Dan Carpenter <[email protected]>
nfs/blocklayout: Use the passed in gfp flags
Russell Currey <[email protected]>
powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
Michael Ellerman <[email protected]>
powerpc: Don't include lppaca.h in paca.h
Ilpo Järvinen <[email protected]>
wifi: ath10k: Use RMW accessors for changing LNKCTL
Ilpo Järvinen <[email protected]>
net/mlx5: Use RMW accessors for changing LNKCTL
Ilpo Järvinen <[email protected]>
drm/radeon: Use RMW accessors for changing LNKCTL
Ilpo Järvinen <[email protected]>
drm/amdgpu: Use RMW accessors for changing LNKCTL
Christophe Leroy <[email protected]>
powerpc/perf: Convert fsl_emb notifier to state machine callbacks
Sourabh Jain <[email protected]>
powerpc/fadump: reset dump area size if fadump memory reserve fails
Stefan Hajnoczi <[email protected]>
vfio/type1: fix cap_migration information leak
Ahmad Fatoum <[email protected]>
clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op
Marco Felsch <[email protected]>
clk: imx8mp: fix sai4 clock
Ilpo Järvinen <[email protected]>
PCI/ASPM: Use RMW accessors for changing LNKCTL
Ilpo Järvinen <[email protected]>
PCI: pciehp: Use RMW accessors for changing LNKCTL
Claudiu Beznea <[email protected]>
pinctrl: mcp23s08: check return value of devm_kasprintf()
Wu Zongyong <[email protected]>
PCI: Mark NVIDIA T4 GPUs to avoid bus reset
Konrad Dybcio <[email protected]>
clk: qcom: reset: Use the correct type of sleep/delay based on length
Patrick Whewell <[email protected]>
clk: qcom: gcc-sm8250: Fix gcc_sdcc2_apps_clk_src
Dmitry Baryshkov <[email protected]>
clk: qcom: gcc-sm8250: use ARRAY_SIZE instead of specifying num_parents
Kemeng Shi <[email protected]>
ext4: correct grp validation in ext4_mb_good_group
David Wronek <[email protected]>
clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src
Dmitry Baryshkov <[email protected]>
clk: qcom: gcc-sc7180: use ARRAY_SIZE instead of specifying num_parents
Zhang Jianhua <[email protected]>
clk: sunxi-ng: Modify mismatched function name
Minjie Du <[email protected]>
drivers: clk: keystone: Fix parameter judgment in _of_pll_clk_init()
Corey Minyard <[email protected]>
ipmi:ssif: Fix a memory leak when scanning for an adapter
Jiasheng Jiang <[email protected]>
ipmi:ssif: Add check for kstrdup
Su Hui <[email protected]>
ALSA: ac97: Fix possible error value of *rac97
Geert Uytterhoeven <[email protected]>
of: unittest: Fix overlay type in apply/revert check
Tony Lindgren <[email protected]>
bus: ti-sysc: Fix cast to enum warning
Sui Jingfeng <[email protected]>
drm/mediatek: Fix potential memory leak if vmap() fail
Tony Lindgren <[email protected]>
bus: ti-sysc: Fix build warning for 64-bit build
Gaosheng Cui <[email protected]>
audit: fix possible soft lockup in __audit_inode_child()
Fabio Estevam <[email protected]>
drm/msm/a2xx: Call adreno_gpu_init() earlier
Yang Wang <[email protected]>
drm/amd/pm: fix variable dereferenced issue in amdgpu_device_attr_create()
Dan Carpenter <[email protected]>
smackfs: Prevent underflow in smk_set_cipso()
Zhang Shurong <[email protected]>
firmware: meson_sm: fix to avoid potential NULL pointer dereference
Daniel Vetter <[email protected]>
drm/msm/mdp5: Don't leak some plane state
Jiasheng Jiang <[email protected]>
drm: xlnx: zynqmp_dpsub: Add missing check for dma_set_mask
Nayna Jain <[email protected]>
ima: Remove deprecated IMA_TRUSTED_KEYRING Kconfig
Marek Vasut <[email protected]>
drm/panel: simple: Add missing connector type and pixel format for AUO T215HVN01
Geert Uytterhoeven <[email protected]>
drm/armada: Fix off-by-one error in armada_overlay_get_property()
Ruan Jinjie <[email protected]>
of: unittest: fix null pointer dereferencing in of_unittest_find_node_by_name()
Yangtao Li <[email protected]>
drm/tegra: dpaux: Fix incorrect return value of platform_get_irq
Tan Zhongjun <[email protected]>
drm/tegra: Remove superfluous error messages around platform_get_irq()
Yu Kuai <[email protected]>
md/md-bitmap: hold 'reconfig_mutex' in backlog_store()
Guoqing Jiang <[email protected]>
md/bitmap: don't set max_write_behind if there is no write mostly device
Srinivasan Shanmugam <[email protected]>
drm/amdgpu: Update min() to min_t() in 'amdgpu_info_ioctl'
Manivannan Sadhasivam <[email protected]>
arm64: dts: qcom: sdm845: Fix the min frequency of "ice_core_clk"
Manivannan Sadhasivam <[email protected]>
arm64: dts: qcom: sdm845: Add missing RPMh power domain to GCC
Rafał Miłecki <[email protected]>
ARM: dts: BCM53573: Fix Ethernet info for Luxul devices
Bogdan Togorean <[email protected]>
drm: adv7511: Fix low refresh rate register for ADV7533/5
Krzysztof Kozlowski <[email protected]>
ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)
Krzysztof Kozlowski <[email protected]>
ARM: dts: s5pv210: add dummy 5V regulator for backlight on SMDKv210
Krzysztof Kozlowski <[email protected]>
ARM: dts: s5pv210: adjust node names to DT spec
Krzysztof Kozlowski <[email protected]>
ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)
Krzysztof Kozlowski <[email protected]>
ARM: dts: s3c64xx: align pinctrl with dtschema
Janusz Krzysztofik <[email protected]>
x86/mm: Fix PAT bit missing from page protection modify mask
Lucas Stach <[email protected]>
drm/etnaviv: fix dumping of active MMU context
Rafał Miłecki <[email protected]>
ARM: dts: BCM53573: Use updated "spi-gpio" binding properties
Rafał Miłecki <[email protected]>
ARM: dts: BCM53573: Add cells sizes to PCIe node
Rafał Miłecki <[email protected]>
ARM: dts: BCM53573: Drop nonexistent #usb-cells
Rafał Miłecki <[email protected]>
ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch
Serge Semin <[email protected]>
ARM: dts: BCM5301X: Harmonize EHCI/OHCI DT nodes name
Arnd Bergmann <[email protected]>
drm/amdgpu: avoid integer overflow warning in amdgpu_device_resize_fb_bar()
Konrad Dybcio <[email protected]>
arm64: dts: qcom: msm8996: Add missing interrupt to the USB2 controller
Luca Weiss <[email protected]>
soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros
Luca Weiss <[email protected]>
soc: qcom: ocmem: Add OCMEM hardware version print
Randy Dunlap <[email protected]>
ASoC: stac9766: fix build errors with REGMAP_AC97
Baokun Li <[email protected]>
quota: fix dqput() to follow the guarantees dquot_srcu should provide
Baokun Li <[email protected]>
quota: add new helper dquot_active()
Baokun Li <[email protected]>
quota: rename dquot_active() to inode_quota_active()
Baokun Li <[email protected]>
quota: factor out dquot_write_dquot()
Marek Vasut <[email protected]>
drm/bridge: tc358764: Fix debug print parameter order
Kuniyuki Iwashima <[email protected]>
netrom: Deny concurrent connect().
Budimir Markovic <[email protected]>
net/sched: sch_hfsc: Ensure inner classes have fsc curve
Biju Das <[email protected]>
hwmon: (tmp513) Fix the channel number in tmp51x_is_visible()
Vadim Pasternak <[email protected]>
mlxsw: i2c: Limit single transaction buffer size
Vadim Pasternak <[email protected]>
mlxsw: i2c: Fix chunk size setting in output mailbox buffer
Jinjie Ruan <[email protected]>
net: arcnet: Do not call kfree_skb() under local_irq_disable()
Wang Ming <[email protected]>
wifi: ath9k: use IS_ERR() with debugfs_create_dir()
Jinjie Ruan <[email protected]>
Bluetooth: btusb: Do not call kfree_skb() under spin_lock_irqsave()
Dmitry Antipov <[email protected]>
wifi: mwifiex: avoid possible NULL skb pointer dereference
Fedor Pchelkin <[email protected]>
wifi: ath9k: protect WMI command response buffer replacement with a lock
Fedor Pchelkin <[email protected]>
wifi: ath9k: fix races between ath9k_wmi_cmd and ath9k_wmi_ctrl_rx
Daniel T. Lee <[email protected]>
samples/bpf: fix broken map lookup probe
Polaris Pi <[email protected]>
wifi: mwifiex: Fix missed return in oob checks failed path
Dmitry Antipov <[email protected]>
wifi: mwifiex: fix memory leak in mwifiex_histogram_read()
Artem Chernyshev <[email protected]>
fs: ocfs2: namei: check return value of ocfs2_add_entry()
Yan Zhai <[email protected]>
lwt: Check LWTUNNEL_XMIT_CONTINUE strictly
Yan Zhai <[email protected]>
lwt: Fix return values of BPF xmit ops
Florian Fainelli <[email protected]>
hwrng: iproc-rng200 - Implement suspend and resume calls
Gaurav Jain <[email protected]>
crypto: caam - fix unchecked return value error
Przemek Kitszel <[email protected]>
ice: ice_aq_check_events: fix off-by-one check when filling buffer
Yipeng Zou <[email protected]>
selftests/bpf: Clean up fmod_ret in bench_rename test script
Menglong Dong <[email protected]>
net: tcp: fix unexcepted socket die when snd_wnd is 0
Min Li <[email protected]>
Bluetooth: Fix potential use-after-free when clear keys
Yuanjun Gong <[email protected]>
Bluetooth: nokia: fix value check in nokia_bluetooth_serdev_probe()
Herbert Xu <[email protected]>
crypto: api - Use work queue in crypto_destroy_instance
Eric Biggers <[email protected]>
crypto: blake2b - sync with blake2s implementation
Uwe Kleine-König <[email protected]>
crypto: stm32 - Properly handle pm_runtime_get failing
Alan Maguire <[email protected]>
selftests/bpf: fix static assert compilation issue for test_cls_*.c
Dmitry Antipov <[email protected]>
wifi: mwifiex: fix error recovery in PCIE buffer descriptor management
Polaris Pi <[email protected]>
wifi: mwifiex: Fix OOB and integer underflow when rx packets
Marc Kleine-Budde <[email protected]>
can: gs_usb: gs_usb_receive_bulk_callback(): count RX overflow errors also in case of OOM
Zhang Shurong <[email protected]>
spi: tegra20-sflash: fix to check return value of platform_get_irq() in tegra_sflash_probe()
Lin Ma <[email protected]>
wifi: mt76: testmode: add nla_policy for MT76_TM_ATTR_TX_LENGTH
Lorenz Bauer <[email protected]>
bpf: reject unhashed sockets in bpf_sk_assign
Lorenz Bauer <[email protected]>
udp: re-score reuseport groups when connected sockets are present
Dan Carpenter <[email protected]>
regmap: rbtree: Use alloc_flags for memory allocations
Martin Kaiser <[email protected]>
hwrng: nomadik - keep clock enabled while hwrng is registered
Eric Dumazet <[email protected]>
tcp: tcp_enter_quickack_mode() should be static
Yafang Shao <[email protected]>
bpf: Clear the probe_addr for uprobe
Alexander Lobakin <[email protected]>
bpftool: Use a local bpf_perf_event_value to fix accessing its fields
Liao Chang <[email protected]>
cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()
Mikel Rychliski <[email protected]>
x86/efistub: Fix PCI ROM preservation in mixed mode
Holger Dengler <[email protected]>
s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs
Holger Dengler <[email protected]>
s390/pkey: fix/harmonize internal keyblob headers
Xu Yang <[email protected]>
perf/imx_ddr: don't enable counter0 if none of 4 counters are used
Ard Biesheuvel <[email protected]>
x86/decompressor: Don't rely on upper 32 bits of GPRs being preserved
Ilpo Järvinen <[email protected]>
selftests/resctrl: Close perf value read fd on errors
Ilpo Järvinen <[email protected]>
selftests/resctrl: Unmount resctrl FS if child fails to run benchmark
Ilpo Järvinen <[email protected]>
selftests/resctrl: Don't leak buffer in fill_cache()
Manivannan Sadhasivam <[email protected]>
OPP: Fix passing 0 to PTR_ERR in _opp_attach_genpd()
Waiman Long <[email protected]>
refscale: Fix uninitalized use of wait_queue_head_t
Kees Cook <[email protected]>
selftests/harness: Actually report SKIP for signal tests
Christian Brauner <[email protected]>
tmpfs: verify {g,u}id mount options correctly
Wang Ming <[email protected]>
fs: Fix error checking for d_hash_and_lookup()
Wen Yang <[email protected]>
eventfd: prevent underflow for eventfd semaphores
David Woodhouse <[email protected]>
eventfd: Export eventfd_ctx_do_read()
Matthew Wilcox <[email protected]>
reiserfs: Check the return value from __getblk()
Sabrina Dubroca <[email protected]>
Revert "net: macsec: preserve ingress frame ordering"
Jan Kara <[email protected]>
udf: Handle error when adding extent to a file
Vladislav Efanov <[email protected]>
udf: Check consistency of Space Bitmap Descriptor
Jordan Rife <[email protected]>
net: Avoid address overwrite in kernel_connect
Shih-Yi Chen <[email protected]>
platform/mellanox: Fix mlxbf-tmfifo not handling all virtio CONSOLE notifications
Zheng Yejian <[email protected]>
tracing: Introduce pipe_cpumask to avoid race on trace_pipes
Takashi Iwai <[email protected]>
ALSA: seq: oss: Fix racy open/close of MIDI devices
Michael Kelley <[email protected]>
scsi: storvsc: Always set no_report_opcodes
Dan Carpenter <[email protected]>
sctp: handle invalid error codes without calling BUG()
David Christensen <[email protected]>
bnx2x: fix page fault following EEH recovery
Dmitry Mastykin <[email protected]>
netlabel: fix shift wrapping bug in netlbl_catmap_setlong()
Chengfeng Ye <[email protected]>
scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock
Baoquan He <[email protected]>
idmaengine: make FSL_EDMA and INTEL_IDMA64 depends on HAS_IOMEM
Martin Kohn <[email protected]>
net: usb: qmi_wwan: add Quectel EM05GV2
Ani Sinha <[email protected]>
vmbus_testing: fix wrong python syntax for integer value comparison
Baoquan He <[email protected]>
clk: fixed-mmio: make COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM
Masami Hiramatsu (Google) <[email protected]>
kprobes: Prohibit probing on CFI preamble symbol
Christian Göttsche <[email protected]>
security: keys: perform capable check only on privileged operations
Minjie Du <[email protected]>
ata: pata_arasan_cf: Use dev_err_probe() instead dev_err() in data_xfer()
Eric Snowberg <[email protected]>
ovl: Always reevaluate the file signature for IMA
Leo Chen <[email protected]>
drm/amd/display: Exit idle optimizations before attempt to access PHY
Konstantin Shelekhin <[email protected]>
platform/x86: huawei-wmi: Silence ambient light sensor
Hans de Goede <[email protected]>
platform/x86: intel: hid: Always call BTNL ACPI method
Guiting Shen <[email protected]>
ASoC: atmel: Fix the 8K sample parameter in I2SC master
Edgar <[email protected]>
ASoc: codecs: ES8316: Fix DMIC config
Winston Wen <[email protected]>
fs/nls: make load_nls() take a const parameter
Stefan Haberland <[email protected]>
s390/dasd: fix hanging device after request requeue
Stefan Haberland <[email protected]>
s390/dasd: use correct number of retries for ERP requests
Ben Hutchings <[email protected]>
m68k: Fix invalid .section syntax
Jiri Benc <[email protected]>
vxlan: generalize vxlan_parse_gpe_hdr and remove unused args
Yuanjun Gong <[email protected]>
ethernet: atheros: fix return value check in atl1c_tso_csum()
Dmytro Maluka <[email protected]>
ASoC: da7219: Check for failure reading AAD IRQ events
Dmytro Maluka <[email protected]>
ASoC: da7219: Flush pending AAD IRQ when suspending
Dominique Martinet <[email protected]>
9p: virtio: make sure 'offs' is initialized in zc_request
Nikolay Burykin <[email protected]>
media: pci: cx23885: fix error handling for cx23885 ATSC boards
Dmitry Antipov <[email protected]>
media: pulse8-cec: handle possible ping error
Adrien Thierry <[email protected]>
phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code
Xiaolei Wang <[email protected]>
ARM: dts: imx: Set default tuning step for imx7d usdhc
Stefan Wahren <[email protected]>
ARM: dts: imx: Adjust dma-apbh node name
Marek Vasut <[email protected]>
ARM: dts: imx7s: Drop dma-apb interrupt-names
Joy Zou <[email protected]>
ARM: dts: imx: update sdma node name format
Oder Chiou <[email protected]>
ASoC: rt5682: Fix a problem with error handling in the io init function of the soundwire
Mario Limonciello <[email protected]>
pinctrl: amd: Don't show Invalid config param errors
Ryusuke Konishi <[email protected]>
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
Ryusuke Konishi <[email protected]>
nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers()
Juerg Haefliger <[email protected]>
fsi: master-ast-cf: Add MODULE_FIRMWARE macro
Wang Ming <[email protected]>
firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe
Hugo Villeneuve <[email protected]>
serial: sc16is7xx: fix bug when first setting GPIO direction
Hugo Villeneuve <[email protected]>
serial: sc16is7xx: fix broken port 0 uart init
Johan Hovold <[email protected]>
serial: qcom-geni: fix opp vote on shutdown
Sishuai Gong <[email protected]>
configfs: fix a race in configfs_lookup()
Zheng Wang <[email protected]>
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition
Nam Cao <[email protected]>
staging: rtl8712: fix race condition
Aaron Armstrong Skomra <[email protected]>
HID: wacom: remove the battery when the EKR is off
Xu Yang <[email protected]>
usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0
Luke Lu <[email protected]>
usb: dwc3: meson-g12a: do post init to fix broken usb after resumption
Slark Xiao <[email protected]>
USB: serial: option: add FOXCONN T99W368/T99W373 product
Martin Kohn <[email protected]>
USB: serial: option: add Quectel EM05G variant (0x030e)
Christoph Hellwig <[email protected]>
modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules
Christoph Hellwig <[email protected]>
rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff
Christoph Hellwig <[email protected]>
net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index
Christoph Hellwig <[email protected]>
mmc: au1xmmc: force non-modular build and remove symbol_get usage
Arnd Bergmann <[email protected]>
ARM: pxa: remove use of symbol_get()
Gao Xiang <[email protected]>
erofs: ensure that the post-EOF tails are all zeroed
-------------
Diffstat:
.../devicetree/bindings/clock/xlnx,versal-clk.yaml | 2 - Documentation/scsi/scsi_mid_low_api.rst | 4 +- Makefile | 4 +- arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 3 +- arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 13 + arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 13 + arch/arm/boot/dts/bcm5301x.dtsi | 4 +- arch/arm/boot/dts/bcm53573.dtsi | 27 +- arch/arm/boot/dts/bcm947189acdbmr.dts | 6 +- arch/arm/boot/dts/exynos4210-i9100.dts | 4 +- arch/arm/boot/dts/imx23.dtsi | 2 +- arch/arm/boot/dts/imx25.dtsi | 2 +- arch/arm/boot/dts/imx28.dtsi | 2 +- arch/arm/boot/dts/imx31.dtsi | 2 +- arch/arm/boot/dts/imx35.dtsi | 2 +- arch/arm/boot/dts/imx50.dtsi | 2 +- arch/arm/boot/dts/imx51.dtsi | 2 +- arch/arm/boot/dts/imx53.dtsi | 2 +- arch/arm/boot/dts/imx6qdl.dtsi | 4 +- arch/arm/boot/dts/imx6sl.dtsi | 2 +- arch/arm/boot/dts/imx6sx.dtsi | 4 +- arch/arm/boot/dts/imx6ul.dtsi | 4 +- arch/arm/boot/dts/imx7s.dtsi | 11 +- arch/arm/boot/dts/s3c6410-mini6410.dts | 6 +- arch/arm/boot/dts/s3c64xx-pinctrl.dtsi | 210 ++++++------- arch/arm/boot/dts/s5pv210-aquila.dts | 12 +- arch/arm/boot/dts/s5pv210-aries.dtsi | 4 +- arch/arm/boot/dts/s5pv210-goni.dts | 14 +- arch/arm/boot/dts/s5pv210-smdkv210.dts | 30 +- arch/arm/mach-omap2/powerdomain.c | 2 +- arch/arm/mach-pxa/sharpsl_pm.c | 2 - arch/arm/mach-pxa/spitz.c | 14 +- arch/arm64/boot/dts/qcom/msm8996.dtsi | 3 + arch/arm64/boot/dts/qcom/sdm845.dtsi | 3 +- arch/arm64/include/asm/sdei.h | 6 + arch/arm64/kernel/entry.S | 27 +- arch/arm64/kernel/sdei.c | 3 + arch/arm64/kernel/smp.c | 8 +- arch/arm64/lib/csum.c | 2 +- arch/m68k/fpsp040/skeleton.S | 4 +- arch/m68k/ifpsp060/os.S | 4 +- arch/m68k/kernel/relocate_kernel.S | 4 +- arch/mips/alchemy/devboards/db1000.c | 8 +- arch/mips/alchemy/devboards/db1200.c | 19 +- arch/mips/alchemy/devboards/db1300.c | 10 +- arch/parisc/include/asm/led.h | 4 +- arch/parisc/include/asm/processor.h | 1 - arch/parisc/kernel/processor.c | 18 +- arch/powerpc/include/asm/lppaca.h | 13 +- arch/powerpc/include/asm/paca.h | 6 +- arch/powerpc/include/asm/paravirt.h | 1 + arch/powerpc/include/asm/plpar_wrappers.h | 1 + arch/powerpc/kernel/fadump.c | 1 + arch/powerpc/kernel/iommu.c | 17 +- arch/powerpc/kvm/book3s_hv_ras.c | 1 + arch/powerpc/mm/book3s64/slb.c | 1 + arch/powerpc/perf/core-fsl-emb.c | 8 +- arch/powerpc/platforms/pseries/lpar.c | 10 +- arch/powerpc/platforms/pseries/lparcfg.c | 4 +- arch/powerpc/platforms/pseries/setup.c | 2 +- arch/powerpc/xmon/xmon.c | 1 + arch/s390/crypto/paes_s390.c | 2 +- arch/s390/kernel/ipl.c | 2 + arch/sh/boards/mach-ap325rxa/setup.c | 2 +- arch/sh/boards/mach-ecovec24/setup.c | 6 +- arch/sh/boards/mach-kfr2r09/setup.c | 2 +- arch/sh/boards/mach-migor/setup.c | 2 +- arch/sh/boards/mach-se/7724/setup.c | 6 +- arch/um/configs/i386_defconfig | 1 + arch/um/configs/x86_64_defconfig | 1 + arch/um/drivers/Kconfig | 16 +- arch/um/drivers/Makefile | 2 +- arch/x86/boot/compressed/head_64.S | 30 +- arch/x86/include/asm/pgtable_types.h | 11 +- arch/x86/include/asm/virtext.h | 6 - arch/x86/kernel/apm_32.c | 6 - arch/x86/kernel/cpu/common.c | 8 +- arch/xtensa/include/asm/core.h | 9 + arch/xtensa/kernel/perf_event.c | 17 +- crypto/algapi.c | 16 +- crypto/asymmetric_keys/x509_public_key.c | 5 + crypto/blake2b_generic.c | 226 +++---------- drivers/acpi/apei/ghes.c | 19 +- drivers/acpi/bus.c | 2 + drivers/acpi/pci_root.c | 3 - drivers/amba/bus.c | 1 + drivers/ata/pata_arasan_cf.c | 3 +- drivers/ata/pata_ftide010.c | 1 + drivers/ata/sata_gemini.c | 1 + drivers/base/regmap/regcache-rbtree.c | 10 +- drivers/base/test/test_async_driver_probe.c | 2 +- drivers/bluetooth/btsdio.c | 1 + drivers/bluetooth/btusb.c | 2 +- drivers/bluetooth/hci_nokia.c | 6 +- drivers/bus/mhi/host/pm.c | 5 + drivers/bus/ti-sysc.c | 2 +- drivers/char/hw_random/iproc-rng200.c | 25 ++ drivers/char/hw_random/nomadik-rng.c | 12 +- drivers/char/ipmi/ipmi_si_intf.c | 5 + drivers/char/ipmi/ipmi_ssif.c | 7 +- drivers/clk/Kconfig | 1 + drivers/clk/imx/clk-composite-8m.c | 12 +- drivers/clk/imx/clk-imx8mp.c | 5 - drivers/clk/imx/clk-pll14xx.c | 2 - drivers/clk/keystone/pll.c | 2 +- drivers/clk/qcom/gcc-mdm9615.c | 2 +- drivers/clk/qcom/gcc-sc7180.c | 33 +- drivers/clk/qcom/gcc-sm8250.c | 93 +++--- drivers/clk/qcom/reset.c | 3 +- drivers/clk/sunxi-ng/ccu_mmc_timing.c | 2 +- drivers/cpufreq/brcmstb-avs-cpufreq.c | 6 +- drivers/cpufreq/cpufreq.c | 2 + drivers/cpufreq/powernow-k8.c | 3 +- drivers/cpuidle/cpuidle-pseries.c | 8 +- drivers/crypto/caam/caampkc.c | 4 +- drivers/crypto/stm32/stm32-hash.c | 9 +- drivers/devfreq/devfreq.c | 1 + drivers/dma/Kconfig | 2 + drivers/dma/ste_dma40.c | 4 + drivers/firmware/Kconfig | 1 + drivers/firmware/arm_sdei.c | 32 +- drivers/firmware/efi/libstub/x86-stub.c | 2 +- drivers/firmware/meson/meson_sm.c | 2 + drivers/firmware/stratix10-svc.c | 2 +- drivers/fsi/fsi-master-aspeed.c | 2 + drivers/fsi/fsi-master-ast-cf.c | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 3 + drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 14 +- drivers/gpu/drm/amd/amdgpu/cik.c | 36 +-- drivers/gpu/drm/amd/amdgpu/si.c | 36 +-- .../amd/display/dc/dce110/dce110_hw_sequencer.c | 3 + drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.c | 5 +- .../drm/amd/display/modules/freesync/freesync.c | 9 +- drivers/gpu/drm/amd/pm/amdgpu_pm.c | 10 +- drivers/gpu/drm/armada/armada_overlay.c | 6 +- drivers/gpu/drm/ast/ast_post.c | 2 +- drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 9 +- drivers/gpu/drm/bridge/tc358764.c | 2 +- drivers/gpu/drm/etnaviv/etnaviv_dump.c | 14 +- drivers/gpu/drm/i915/gvt/gtt.c | 68 +++- drivers/gpu/drm/i915/gvt/gtt.h | 5 +- drivers/gpu/drm/i915/gvt/gvt.c | 9 + drivers/gpu/drm/i915/gvt/gvt.h | 3 + drivers/gpu/drm/i915/gvt/handlers.c | 44 ++- drivers/gpu/drm/i915/gvt/mmio.h | 4 + drivers/gpu/drm/i915/intel_gvt.c | 15 + drivers/gpu/drm/i915/intel_gvt.h | 5 + drivers/gpu/drm/mediatek/mtk_drm_gem.c | 6 +- drivers/gpu/drm/msm/adreno/a2xx_gpu.c | 8 +- drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c | 3 +- drivers/gpu/drm/panel/panel-simple.c | 4 +- drivers/gpu/drm/radeon/cik.c | 36 +-- drivers/gpu/drm/radeon/si.c | 37 +-- drivers/gpu/drm/tegra/dpaux.c | 6 +- drivers/gpu/drm/xlnx/zynqmp_dpsub.c | 4 +- drivers/hid/hid-logitech-dj.c | 5 +- drivers/hid/hid-multitouch.c | 13 +- drivers/hid/wacom.h | 1 + drivers/hid/wacom_sys.c | 25 +- drivers/hid/wacom_wac.c | 1 + drivers/hid/wacom_wac.h | 1 + drivers/hwmon/tmp513.c | 2 +- drivers/hwtracing/coresight/coresight-tmc-etf.c | 2 +- drivers/hwtracing/coresight/coresight-tmc-etr.c | 5 +- drivers/hwtracing/coresight/coresight-tmc.h | 2 +- .../infiniband/core/uverbs_std_types_counters.c | 2 + drivers/infiniband/sw/siw/siw_cm.c | 1 - drivers/infiniband/sw/siw/siw_verbs.c | 2 +- drivers/infiniband/ulp/isert/ib_isert.c | 2 + drivers/infiniband/ulp/srp/ib_srp.c | 4 - drivers/iommu/arm/arm-smmu/qcom_iommu.c | 7 + drivers/iommu/intel/pasid.c | 2 +- drivers/leds/led-core.c | 8 +- drivers/md/md-bitmap.c | 28 +- drivers/media/cec/usb/pulse8/pulse8-cec.c | 7 +- drivers/media/dvb-frontends/ascot2e.c | 2 +- drivers/media/dvb-frontends/atbm8830.c | 2 +- drivers/media/dvb-frontends/au8522_dig.c | 2 +- drivers/media/dvb-frontends/bcm3510.c | 2 +- drivers/media/dvb-frontends/cx22700.c | 2 +- drivers/media/dvb-frontends/cx22702.c | 2 +- drivers/media/dvb-frontends/cx24110.c | 2 +- drivers/media/dvb-frontends/cx24113.c | 2 +- drivers/media/dvb-frontends/cx24116.c | 2 +- drivers/media/dvb-frontends/cx24120.c | 6 +- drivers/media/dvb-frontends/cx24123.c | 2 +- drivers/media/dvb-frontends/cxd2820r_core.c | 2 +- drivers/media/dvb-frontends/cxd2841er.c | 4 +- drivers/media/dvb-frontends/cxd2880/cxd2880_top.c | 2 +- drivers/media/dvb-frontends/dib0070.c | 2 +- drivers/media/dvb-frontends/dib0090.c | 4 +- drivers/media/dvb-frontends/dib3000mb.c | 2 +- drivers/media/dvb-frontends/dib3000mc.c | 2 +- drivers/media/dvb-frontends/dib7000m.c | 2 +- drivers/media/dvb-frontends/dib7000p.c | 4 +- drivers/media/dvb-frontends/dib8000.c | 2 +- drivers/media/dvb-frontends/dib9000.c | 2 +- drivers/media/dvb-frontends/drx39xyj/drxj.c | 2 +- drivers/media/dvb-frontends/drxd_hard.c | 2 +- drivers/media/dvb-frontends/drxk_hard.c | 2 +- drivers/media/dvb-frontends/ds3000.c | 2 +- drivers/media/dvb-frontends/dvb-pll.c | 2 +- drivers/media/dvb-frontends/ec100.c | 2 +- drivers/media/dvb-frontends/helene.c | 4 +- drivers/media/dvb-frontends/horus3a.c | 2 +- drivers/media/dvb-frontends/isl6405.c | 2 +- drivers/media/dvb-frontends/isl6421.c | 2 +- drivers/media/dvb-frontends/isl6423.c | 2 +- drivers/media/dvb-frontends/itd1000.c | 2 +- drivers/media/dvb-frontends/ix2505v.c | 2 +- drivers/media/dvb-frontends/l64781.c | 2 +- drivers/media/dvb-frontends/lg2160.c | 2 +- drivers/media/dvb-frontends/lgdt3305.c | 2 +- drivers/media/dvb-frontends/lgdt3306a.c | 2 +- drivers/media/dvb-frontends/lgdt330x.c | 2 +- drivers/media/dvb-frontends/lgs8gxx.c | 2 +- drivers/media/dvb-frontends/lnbh25.c | 2 +- drivers/media/dvb-frontends/lnbp21.c | 4 +- drivers/media/dvb-frontends/lnbp22.c | 2 +- drivers/media/dvb-frontends/m88ds3103.c | 2 +- drivers/media/dvb-frontends/m88rs2000.c | 2 +- drivers/media/dvb-frontends/mb86a16.c | 2 +- drivers/media/dvb-frontends/mb86a20s.c | 2 +- drivers/media/dvb-frontends/mt312.c | 2 +- drivers/media/dvb-frontends/mt352.c | 2 +- drivers/media/dvb-frontends/nxt200x.c | 2 +- drivers/media/dvb-frontends/nxt6000.c | 2 +- drivers/media/dvb-frontends/or51132.c | 2 +- drivers/media/dvb-frontends/or51211.c | 2 +- drivers/media/dvb-frontends/s5h1409.c | 2 +- drivers/media/dvb-frontends/s5h1411.c | 2 +- drivers/media/dvb-frontends/s5h1420.c | 2 +- drivers/media/dvb-frontends/s5h1432.c | 2 +- drivers/media/dvb-frontends/s921.c | 2 +- drivers/media/dvb-frontends/si21xx.c | 2 +- drivers/media/dvb-frontends/sp887x.c | 2 +- drivers/media/dvb-frontends/stb0899_drv.c | 2 +- drivers/media/dvb-frontends/stb6000.c | 2 +- drivers/media/dvb-frontends/stb6100.c | 2 +- drivers/media/dvb-frontends/stv0288.c | 2 +- drivers/media/dvb-frontends/stv0297.c | 2 +- drivers/media/dvb-frontends/stv0299.c | 2 +- drivers/media/dvb-frontends/stv0367.c | 6 +- drivers/media/dvb-frontends/stv0900_core.c | 2 +- drivers/media/dvb-frontends/stv090x.c | 2 +- drivers/media/dvb-frontends/stv6110.c | 2 +- drivers/media/dvb-frontends/stv6110x.c | 2 +- drivers/media/dvb-frontends/tda10021.c | 2 +- drivers/media/dvb-frontends/tda10023.c | 2 +- drivers/media/dvb-frontends/tda10048.c | 2 +- drivers/media/dvb-frontends/tda1004x.c | 4 +- drivers/media/dvb-frontends/tda10086.c | 2 +- drivers/media/dvb-frontends/tda665x.c | 2 +- drivers/media/dvb-frontends/tda8083.c | 2 +- drivers/media/dvb-frontends/tda8261.c | 2 +- drivers/media/dvb-frontends/tda826x.c | 2 +- drivers/media/dvb-frontends/ts2020.c | 2 +- drivers/media/dvb-frontends/tua6100.c | 2 +- drivers/media/dvb-frontends/ves1820.c | 2 +- drivers/media/dvb-frontends/ves1x93.c | 2 +- drivers/media/dvb-frontends/zl10036.c | 2 +- drivers/media/dvb-frontends/zl10039.c | 2 +- drivers/media/dvb-frontends/zl10353.c | 2 +- drivers/media/i2c/ad5820.c | 2 - drivers/media/i2c/ov2680.c | 246 +++------------ drivers/media/i2c/ov5640.c | 4 +- drivers/media/i2c/tvp5150.c | 4 + drivers/media/pci/bt8xx/dst.c | 2 +- drivers/media/pci/bt8xx/dst_ca.c | 2 +- drivers/media/pci/cx23885/cx23885-dvb.c | 12 - drivers/media/pci/ddbridge/ddbridge-dummy-fe.c | 2 +- .../media/platform/mtk-vcodec/vdec/vdec_vp9_if.c | 5 +- drivers/media/tuners/fc0011.c | 2 +- drivers/media/tuners/fc0012.c | 2 +- drivers/media/tuners/fc0013.c | 2 +- drivers/media/tuners/max2165.c | 2 +- drivers/media/tuners/mc44s803.c | 2 +- drivers/media/tuners/mt2060.c | 2 +- drivers/media/tuners/mt2131.c | 2 +- drivers/media/tuners/mt2266.c | 2 +- drivers/media/tuners/mxl5005s.c | 2 +- drivers/media/tuners/qt1010.c | 2 +- drivers/media/tuners/tda18218.c | 2 +- drivers/media/tuners/xc4000.c | 2 +- drivers/media/tuners/xc5000.c | 2 +- drivers/media/usb/dvb-usb/m920x.c | 5 +- drivers/media/usb/go7007/go7007-i2c.c | 2 - drivers/media/usb/siano/smsusb.c | 21 +- drivers/media/v4l2-core/v4l2-fwnode.c | 18 +- drivers/mmc/host/Kconfig | 5 +- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 45 ++- drivers/mtd/nand/raw/fsmc_nand.c | 7 +- drivers/mtd/spi-nor/core.c | 19 +- drivers/net/arcnet/arcnet.c | 2 +- drivers/net/can/usb/gs_usb.c | 5 +- drivers/net/dsa/sja1105/sja1105_main.c | 38 ++- drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 7 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 9 +- drivers/net/ethernet/freescale/enetc/enetc_ptp.c | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 4 +- drivers/net/ethernet/intel/ice/ice_main.c | 13 +- drivers/net/ethernet/intel/igb/igb.h | 4 +- drivers/net/ethernet/intel/igb/igb_main.c | 16 +- drivers/net/ethernet/intel/igbvf/igbvf.h | 4 +- drivers/net/ethernet/intel/igc/igc.h | 4 +- drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 28 +- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 5 + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 + drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c | 9 +- drivers/net/ethernet/mellanox/mlxsw/i2c.c | 5 +- drivers/net/macsec.c | 3 +- drivers/net/usb/qmi_wwan.c | 1 + drivers/net/usb/r8152.c | 3 + drivers/net/veth.c | 4 +- drivers/net/vxlan/vxlan_core.c | 58 ++-- drivers/net/wireless/ath/ath10k/pci.c | 9 +- drivers/net/wireless/ath/ath9k/htc_drv_debug.c | 2 +- drivers/net/wireless/ath/ath9k/wmi.c | 20 +- drivers/net/wireless/marvell/mwifiex/debugfs.c | 9 +- drivers/net/wireless/marvell/mwifiex/pcie.c | 25 +- drivers/net/wireless/marvell/mwifiex/sta_rx.c | 12 +- drivers/net/wireless/marvell/mwifiex/uap_txrx.c | 30 +- drivers/net/wireless/marvell/mwifiex/util.c | 10 +- drivers/net/wireless/mediatek/mt76/testmode.c | 1 + drivers/ntb/ntb_transport.c | 19 +- drivers/of/unittest.c | 12 +- drivers/opp/core.c | 2 +- drivers/parisc/led.c | 4 +- drivers/pci/hotplug/pciehp_hpc.c | 12 +- drivers/pci/pcie/aspm.c | 30 +- drivers/perf/fsl_imx8_ddr_perf.c | 24 +- drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 6 +- drivers/phy/rockchip/phy-rockchip-inno-hdmi.c | 18 +- drivers/pinctrl/intel/pinctrl-cherryview.c | 5 +- drivers/pinctrl/pinctrl-amd.c | 4 +- drivers/pinctrl/pinctrl-mcp23s08_spi.c | 10 + drivers/platform/mellanox/mlxbf-tmfifo.c | 91 ++++-- drivers/platform/x86/huawei-wmi.c | 2 + drivers/platform/x86/intel-hid.c | 21 +- drivers/pwm/pwm-lpc32xx.c | 16 +- drivers/rpmsg/qcom_glink_native.c | 4 + drivers/rtc/rtc-ds1685.c | 2 +- drivers/s390/block/dasd.c | 125 +++----- drivers/s390/block/dasd_3990_erp.c | 2 +- drivers/s390/crypto/pkey_api.c | 2 +- drivers/s390/crypto/zcrypt_api.c | 1 + drivers/s390/crypto/zcrypt_ep11misc.c | 4 +- drivers/s390/crypto/zcrypt_ep11misc.h | 9 +- drivers/scsi/aic94xx/aic94xx_task.c | 2 +- drivers/scsi/be2iscsi/be_iscsi.c | 4 + drivers/scsi/fcoe/fcoe_ctlr.c | 20 +- drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 8 +- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 19 +- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 62 ++-- drivers/scsi/hosts.c | 4 +- drivers/scsi/isci/request.c | 10 +- drivers/scsi/isci/task.c | 2 +- drivers/scsi/libsas/sas_ata.c | 7 +- drivers/scsi/libsas/sas_expander.c | 2 +- drivers/scsi/libsas/sas_task.c | 4 +- drivers/scsi/mpt3sas/mpt3sas_base.c | 46 ++- drivers/scsi/mpt3sas/mpt3sas_base.h | 1 + drivers/scsi/mvsas/mv_sas.c | 10 +- drivers/scsi/pm8001/pm8001_hwi.c | 16 +- drivers/scsi/pm8001/pm8001_sas.c | 4 +- drivers/scsi/pm8001/pm80xx_hwi.c | 14 +- drivers/scsi/qedf/qedf_dbg.h | 2 + drivers/scsi/qedf/qedf_debugfs.c | 35 ++- drivers/scsi/qedi/qedi_main.c | 5 +- drivers/scsi/qla2xxx/qla_attr.c | 2 - drivers/scsi/qla2xxx/qla_dbg.c | 18 +- drivers/scsi/qla2xxx/qla_def.h | 12 +- drivers/scsi/qla2xxx/qla_gbl.h | 3 + drivers/scsi/qla2xxx/qla_init.c | 68 ++-- drivers/scsi/qla2xxx/qla_inline.h | 46 +++ drivers/scsi/qla2xxx/qla_iocb.c | 60 +++- drivers/scsi/qla2xxx/qla_isr.c | 16 +- drivers/scsi/qla2xxx/qla_mbx.c | 7 +- drivers/scsi/qla2xxx/qla_nvme.c | 12 +- drivers/scsi/qla2xxx/qla_os.c | 223 +++++++------ drivers/scsi/qla2xxx/qla_target.c | 14 +- drivers/scsi/qla4xxx/ql4_os.c | 15 + drivers/scsi/scsi_transport_iscsi.c | 80 +++-- drivers/scsi/storvsc_drv.c | 2 + drivers/soc/qcom/ocmem.c | 14 +- drivers/soc/qcom/qmi_encdec.c | 4 +- drivers/spi/spi-tegra20-sflash.c | 6 +- drivers/staging/media/rkvdec/rkvdec.c | 2 +- drivers/staging/rtl8712/os_intfs.c | 1 + drivers/staging/rtl8712/usb_intf.c | 1 - drivers/tty/serial/qcom_geni_serial.c | 5 + drivers/tty/serial/sc16is7xx.c | 17 +- drivers/tty/serial/serial-tegra.c | 6 +- drivers/tty/serial/sprd_serial.c | 30 +- drivers/usb/chipidea/ci_hdrc_imx.c | 10 +- drivers/usb/chipidea/usbmisc_imx.c | 6 +- drivers/usb/core/hcd.c | 10 +- drivers/usb/core/hub.c | 349 ++++++++++++--------- drivers/usb/core/message.c | 29 +- drivers/usb/core/usb.h | 4 +- drivers/usb/dwc3/dwc3-meson-g12a.c | 6 + drivers/usb/gadget/function/f_mass_storage.c | 2 +- drivers/usb/phy/phy-mxs-usb.c | 10 +- drivers/usb/serial/option.c | 7 + drivers/usb/typec/bus.c | 12 +- drivers/usb/typec/tcpm/tcpci.c | 4 + drivers/usb/typec/tcpm/tcpci.h | 1 + drivers/usb/typec/tcpm/tcpm.c | 3 +- drivers/vfio/vfio_iommu_type1.c | 2 +- drivers/video/backlight/bd6107.c | 2 +- drivers/video/backlight/gpio_backlight.c | 5 +- drivers/video/backlight/lv5207lp.c | 2 +- drivers/video/fbdev/ep93xx-fb.c | 1 - drivers/virtio/virtio_ring.c | 2 +- drivers/watchdog/intel-mid_wdt.c | 1 + fs/btrfs/disk-io.c | 5 +- fs/btrfs/transaction.c | 7 +- fs/configfs/dir.c | 2 + fs/dlm/plock.c | 6 +- fs/erofs/zdata.c | 2 + fs/eventfd.c | 7 +- fs/ext4/balloc.c | 15 +- fs/ext4/block_validity.c | 8 +- fs/ext4/ext4.h | 2 + fs/ext4/mballoc.c | 2 +- fs/fuse/readdir.c | 10 +- fs/jfs/jfs_extent.c | 5 + fs/lockd/mon.c | 3 + fs/namei.c | 2 +- fs/nfs/blocklayout/dev.c | 4 +- fs/nfs/direct.c | 20 +- fs/nfs/nfs2xdr.c | 2 +- fs/nfs/nfs3xdr.c | 2 +- fs/nfs/nfs42proc.c | 5 +- fs/nfs/pnfs_dev.c | 2 +- fs/nfsd/blocklayoutxdr.c | 9 + fs/nfsd/flexfilelayoutxdr.c | 9 + fs/nfsd/nfs4xdr.c | 25 +- fs/nilfs2/alloc.c | 3 +- fs/nilfs2/inode.c | 7 +- fs/nilfs2/segment.c | 5 + fs/nls/nls_base.c | 4 +- fs/ocfs2/namei.c | 4 + fs/overlayfs/super.c | 2 +- fs/proc/base.c | 3 +- fs/pstore/ram_core.c | 2 +- fs/quota/dquot.c | 174 ++++++---- fs/reiserfs/journal.c | 4 +- fs/udf/balloc.c | 31 +- fs/udf/inode.c | 45 ++- fs/verity/signature.c | 16 + include/acpi/apei.h | 4 +- include/crypto/algapi.h | 3 + include/crypto/blake2b.h | 67 ++++ include/crypto/internal/blake2b.h | 115 +++++++ include/linux/arm_sdei.h | 4 + include/linux/eventfd.h | 6 + include/linux/if_arp.h | 4 + include/linux/nls.h | 2 +- include/linux/trace_events.h | 3 +- include/linux/usb/typec_altmode.h | 2 +- include/net/ip.h | 1 + include/net/ip_tunnels.h | 15 +- include/net/ipv6.h | 2 +- include/net/lwtunnel.h | 5 +- include/net/tcp.h | 1 - include/scsi/libsas.h | 12 +- include/scsi/scsi_host.h | 2 +- include/uapi/linux/sync_file.h | 2 +- io_uring/io-wq.c | 10 + io_uring/io-wq.h | 1 + io_uring/io_uring.c | 9 +- kernel/auditsc.c | 2 + kernel/bpf/verifier.c | 17 +- kernel/cgroup/namespace.c | 6 - kernel/kprobes.c | 14 +- kernel/module.c | 15 +- kernel/printk/printk_ringbuffer.c | 2 +- kernel/rcu/refscale.c | 3 +- kernel/trace/bpf_trace.c | 2 +- kernel/trace/trace.c | 72 ++++- kernel/trace/trace.h | 2 + kernel/trace/trace_uprobe.c | 3 +- lib/idr.c | 2 +- lib/test_meminit.c | 2 +- mm/shmem.c | 28 +- net/9p/trans_virtio.c | 2 +- net/bluetooth/hci_core.c | 16 +- net/core/filter.c | 2 + net/core/flow_dissector.c | 3 +- net/core/lwt_bpf.c | 7 +- net/core/skbuff.c | 34 +- net/core/sock.c | 9 +- net/dccp/ipv4.c | 13 +- net/dccp/ipv6.c | 15 +- net/hsr/hsr_forward.c | 1 + net/ipv4/devinet.c | 10 +- net/ipv4/fib_semantics.c | 5 +- net/ipv4/fib_trie.c | 3 +- net/ipv4/igmp.c | 3 +- net/ipv4/ip_input.c | 3 +- net/ipv4/ip_output.c | 2 +- net/ipv4/route.c | 1 + net/ipv4/tcp_input.c | 3 +- net/ipv4/tcp_timer.c | 18 +- net/ipv4/udp.c | 20 +- net/ipv6/addrconf.c | 2 +- net/ipv6/ip6_output.c | 2 +- net/ipv6/udp.c | 19 +- net/kcm/kcmsock.c | 15 +- net/netfilter/ipset/ip_set_hash_netportnet.c | 1 + net/netfilter/nfnetlink_osf.c | 8 + net/netfilter/xt_sctp.c | 2 + net/netfilter/xt_u32.c | 21 ++ net/netlabel/netlabel_kapi.c | 3 +- net/netrom/af_netrom.c | 5 + net/sched/sch_fq_pie.c | 27 +- net/sched/sch_hfsc.c | 4 + net/sched/sch_plug.c | 2 +- net/sched/sch_qfq.c | 22 +- net/sctp/proc.c | 2 +- net/sctp/sm_sideeffect.c | 5 +- net/sctp/socket.c | 10 +- net/smc/smc_core.c | 2 + net/socket.c | 6 +- net/tls/tls_sw.c | 4 +- net/unix/af_unix.c | 2 +- net/unix/scm.c | 6 +- samples/bpf/tracex6_kern.c | 17 +- scripts/kconfig/preprocess.c | 3 + security/integrity/ima/Kconfig | 12 - security/keys/keyctl.c | 11 +- security/smack/smackfs.c | 2 +- sound/Kconfig | 2 +- sound/core/pcm_compat.c | 8 +- sound/core/seq/oss/seq_oss_midi.c | 35 ++- sound/pci/ac97/ac97_codec.c | 5 +- sound/soc/atmel/atmel-i2s.c | 5 +- sound/soc/codecs/Kconfig | 1 + sound/soc/codecs/da7219-aad.c | 12 +- sound/soc/codecs/es8316.c | 2 +- sound/soc/codecs/rt5682-sdw.c | 7 +- tools/bpf/bpftool/skeleton/profiler.bpf.c | 27 +- tools/hv/vmbus_testing | 4 +- tools/perf/builtin-top.c | 1 + tools/perf/ui/browsers/hists.c | 60 ++-- tools/perf/util/annotate.c | 10 +- tools/perf/util/header.c | 11 +- .../selftests/bpf/benchs/run_bench_rename.sh | 2 +- .../selftests/bpf/progs/test_cls_redirect.h | 9 + tools/testing/selftests/kselftest/runner.sh | 29 +- tools/testing/selftests/kselftest_harness.h | 11 +- tools/testing/selftests/resctrl/cache.c | 18 +- tools/testing/selftests/resctrl/fill_buf.c | 3 +- tools/testing/selftests/resctrl/resctrl.h | 1 + 555 files changed, 3750 insertions(+), 2444 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 21/406 nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ryusuke Konishi <[email protected]>
commit cdaac8e7e5a059f9b5e816cda257f08d0abffacd upstream.
A syzbot stress test using a corrupted disk image reported that mark_buffer_dirty() called from __nilfs_mark_inode_dirty() or nilfs_palloc_commit_alloc_entry() may output a kernel warning, and can panic if the kernel is booted with panic_on_warn.
This is because nilfs2 keeps buffer pointers in local structures for some metadata and reuses them, but such buffers may be forcibly discarded by nilfs_clear_dirty_page() in some critical situations.
This issue is reported to appear after commit 28a65b49eb53 ("nilfs2: do not write dirty data after degenerating to read-only"), but the issue has potentially existed before.
Fix this issue by checking the uptodate flag when attempting to reuse an internally held buffer, and reloading the metadata instead of reusing the buffer if the flag was lost.
--- fs/nilfs2/alloc.c | 3 ++- fs/nilfs2/inode.c | 7 +++++-- 2 files changed, 7 insertions(+), 3 deletions(-)
fs/nilfs2/alloc.c +2 -1
@@ -205,7 +205,8 @@ static int nilfs_palloc_get_block(structint ret;spin_lock (lock); -if (prev->bh && blkoff == prev->blkoff) { +if (prev->bh && blkoff == prev->blkoff && +likely (buffer_uptodate (prev->bh))) {get_bh (prev->bh); *bhp = prev->bh;spin_unlock (lock);
fs/nilfs2/inode.c +5 -2
@@ -1027,7 +1027,7 @@ int nilfs_load_inode_block(struct inodeint err;spin_lock (&nilfs->ns_inode_lock); -if (ii->i_bh ==NULL ) { +if (ii->i_bh ==NULL ||unlikely (!buffer_uptodate (ii->i_bh))) {spin_unlock (&nilfs->ns_inode_lock); err =nilfs_ifile_get_inode_block (ii->i_root->ifile, inode->i_ino, pbh);
@@ -1036,7 +1036,10 @@ int nilfs_load_inode_block(struct inodespin_lock (&nilfs->ns_inode_lock);if (ii->i_bh ==NULL ) ii->i_bh = *pbh; -else { +else if (unlikely (!buffer_uptodate (ii->i_bh))) { +__brelse (ii->i_bh); + ii->i_bh = *pbh; + }else {brelse (*pbh); *pbh = ii->i_bh; }
Greg Kroah-Hartman
maintainerPATCH 30/406 media: pci: cx23885: fix error handling for cx23885 ATSC boards
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nikolay Burykin <[email protected]>
[ Upstream commit 4aaa96b59df5fac41ba891969df6b092061ea9d7 ]
After having been assigned to NULL value at cx23885-dvb.c:1202, pointer '0' is dereferenced at cx23885-dvb.c:2469.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
--- drivers/media/pci/cx23885/cx23885-dvb.c | 12 ------------ 1 file changed, 12 deletions(-)
drivers/media/pci/cx23885/cx23885-dvb.c +0 -12
@@ -2459,16 +2459,10 @@ static int dvb_register(struct cx23885_tsport *port)request_module ("%s" , info.type); client_tuner =i2c_new_client_device (&dev->i2c_bus[1 ].i2c_adap, &info);if (!i2c_client_has_driver (client_tuner)) { -module_put (client_demod->dev.driver->owner); -i2c_unregister_device (client_demod); - port->i2c_client_demod =NULL ; goto frontend_detach; }if (!try_module_get (client_tuner->dev.driver->owner)) {i2c_unregister_device (client_tuner); -module_put (client_demod->dev.driver->owner); -i2c_unregister_device (client_demod); - port->i2c_client_demod =NULL ; goto frontend_detach; } port->i2c_client_tuner = client_tuner;
@@ -2505,16 +2499,10 @@ static int dvb_register(struct cx23885_tsport *port)request_module ("%s" , info.type); client_tuner =i2c_new_client_device (&dev->i2c_bus[1 ].i2c_adap, &info);if (!i2c_client_has_driver (client_tuner)) { -module_put (client_demod->dev.driver->owner); -i2c_unregister_device (client_demod); - port->i2c_client_demod =NULL ; goto frontend_detach; }if (!try_module_get (client_tuner->dev.driver->owner)) {i2c_unregister_device (client_tuner); -module_put (client_demod->dev.driver->owner); -i2c_unregister_device (client_demod); - port->i2c_client_demod =NULL ; goto frontend_detach; } port->i2c_client_tuner = client_tuner;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 31/406 9p: virtio: make sure offs is initialized in zc_request
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dominique Martinet <[email protected]>
[ Upstream commit 4a73edab69d3a6623f03817fe950a2d9585f80e4 ]
Similarly to the previous patch: offs can be used in handle_rerrors without initializing on small payloads; in this case handle_rerrors will not use it because of the size check, but it doesn't hurt to make sure it is zero to please scan-build.
This fixes the following warning:net/9p/trans_virtio.c:539:3: warning: 3rd function call argument is an uninitialized value [core.CallAndMessage]
handle_rerror(req, in_hdr_len, offs, in_pages);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~--- net/9p/trans_virtio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/9p/trans_virtio.c +1 -1
@@ -394,7 +394,7 @@ p9_virtio_zc_request(struct p9_client *client, struct p9_req_t *req,struct page **in_pages =NULL , **out_pages =NULL ;struct virtio_chan *chan = client->trans;struct scatterlist *sgs[4 ]; -size_t offs; +size_t offs =0 ;int need_drop =0 ;int kicked =0 ;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 32/406 ASoC: da7219: Flush pending AAD IRQ when suspending
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmytro Maluka <[email protected]>
[ Upstream commit 91e292917dad64ab8d1d5ca2ab3069ad9dac6f72 ]
da7219_aad_suspend() disables jack detection, which should prevent generating new interrupts by DA7219 while suspended. However, there is a theoretical possibility that there is a pending interrupt generated just before suspending DA7219 and not handled yet, so the IRQ handler may still run after DA7219 is suspended. To prevent that, wait until the pending IRQ handling is done.
This patch arose as an attempt to fix the following I2C failure occurring sometimes during system suspend or resume:
[ 355.876211] i2c_designware i2c_designware.3: Transfer while suspended [ 355.876245] WARNING: CPU: 2 PID: 3576 at drivers/i2c/busses/i2c-designware-master.c:570 i2c_dw_xfer+0x411/0x440 ... [ 355.876462] Call Trace: [ 355.876468] <TASK> [ 355.876475] ? update_load_avg+0x1b3/0x615 [ 355.876484] __i2c_transfer+0x101/0x1d8 [ 355.876494] i2c_transfer+0x74/0x10d [ 355.876504] regmap_i2c_read+0x6a/0x9c [ 355.876513] _regmap_raw_read+0x179/0x223 [ 355.876521] regmap_raw_read+0x1e1/0x28e [ 355.876527] regmap_bulk_read+0x17d/0x1ba [ 355.876532] ? __wake_up+0xed/0x1bb [ 355.876542] da7219_aad_irq_thread+0x54/0x2c9 [snd_soc_da7219 5fb8ebb2179cf2fea29af090f3145d68ed8e2184] [ 355.876556] irq_thread+0x13c/0x231 [ 355.876563] ? irq_forced_thread_fn+0x5f/0x5f [ 355.876570] ? irq_thread_fn+0x4d/0x4d [ 355.876576] kthread+0x13a/0x152 [ 355.876581] ? synchronize_irq+0xc3/0xc3 [ 355.876587] ? kthread_blkcg+0x31/0x31 [ 355.876592] ret_from_fork+0x1f/0x30 [ 355.876601] </TASK>
which indicates that the AAD IRQ handler is unexpectedly running when DA7219 is suspended, and as a result, is trying to read data from DA7219 over I2C and is hitting the I2C driver "Transfer while suspended" failure.
However, with this patch the above failure is still reproducible. So this patch does not fix any real observed issue so far, but at least is useful for confirming that the above issue is not caused by a pending IRQ but rather looks like a DA7219 hardware issue with an IRQ unexpectedly generated after jack detection is already disabled.
--- sound/soc/codecs/da7219-aad.c | 2 ++ 1 file changed, 2 insertions(+)
sound/soc/codecs/da7219-aad.c +2 -0
@@ -854,6 +854,8 @@ void da7219_aad_suspend(struct snd_soc_component *component) } } } + +synchronize_irq (da7219_aad->irq); }void da7219_aad_resume (struct snd_soc_component *component)
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 33/406 ASoC: da7219: Check for failure reading AAD IRQ events
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmytro Maluka <[email protected]>
[ Upstream commit f0691dc16206f21b13c464434366e2cd632b8ed7 ]
When handling an AAD interrupt, if IRQ events read failed (for example, due to i2c "Transfer while suspended" failure, i.e. when attempting to read it while DA7219 is suspended, which may happen due to a spurious AAD interrupt), the events array contains garbage uninitialized values. So instead of trying to interprete those values and doing any actions based on them (potentially resulting in misbehavior, e.g. reporting bogus events), refuse to handle the interrupt.
--- sound/soc/codecs/da7219-aad.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
sound/soc/codecs/da7219-aad.c +7 -3
@@ -347,11 +347,15 @@ static irqreturn_t da7219_aad_irq_thread(int irq, void *data)struct da7219_priv *da7219 =snd_soc_component_get_drvdata (component);u8 events[DA7219_AAD_IRQ_REG_MAX ];u8 statusa; -int i, report =0 , mask =0 ; +int i, ret, report =0 , mask =0 ;/* Read current IRQ events */ -regmap_bulk_read (da7219->regmap,DA7219_ACCDET_IRQ_EVENT_A , - events,DA7219_AAD_IRQ_REG_MAX ); + ret =regmap_bulk_read (da7219->regmap,DA7219_ACCDET_IRQ_EVENT_A , + events,DA7219_AAD_IRQ_REG_MAX ); +if (ret) { +dev_warn_ratelimited (component->dev,"Failed to read IRQ events: %d\n" , ret); +return IRQ_NONE ; + }if (!events[DA7219_AAD_IRQ_REG_A ] && !events[DA7219_AAD_IRQ_REG_B ])return IRQ_NONE ;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 34/406 ethernet: atheros: fix return value check in atl1c_tso_csum()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yuanjun Gong <[email protected]>
[ Upstream commit 8d01da0a1db237c44c92859ce3612df7af8d3a53 ]
in atl1c_tso_csum, it should check the return value of pskb_trim(), and return an error code if an unexpected value is returned by pskb_trim().
--- drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/net/ethernet/atheros/atl1c/atl1c_main.c +5 -2
@@ -1987,8 +1987,11 @@ static int atl1c_tso_csum(struct atl1c_adapter *adapter, real_len = (((unsigned char *)ip_hdr (skb) - skb->data) +ntohs (ip_hdr (skb)->tot_len)); -if (real_len < skb->len) -pskb_trim (skb, real_len); +if (real_len < skb->len) { + err =pskb_trim (skb, real_len); +if (err) +return err; + } hdr_len = (skb_transport_offset (skb) +tcp_hdrlen (skb));if (unlikely (skb->len == hdr_len)) {
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 35/406 vxlan: generalize vxlan_parse_gpe_hdr and remove unused args
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Benc <[email protected]>
[ Upstream commit 17a0a64448b568442a101de09575f81ffdc45d15 ]
The vxlan_parse_gpe_hdr function extracts the next protocol value from the GPE header and marks GPE bits as parsed.
In order to be used in the next patch, split the function into protocol extraction and bit marking. The bit marking is meaningful only in vxlan_rcv; move it directly there.
Rename the function to vxlan_parse_gpe_proto to reflect what it now does. Remove unused arguments skb and vxflags. Move the function earlier in the file to allow it to be called from more places in the next patch.
--- drivers/net/vxlan/vxlan_core.c | 58 ++++++++++++++++------------------ 1 file changed, 28 insertions(+), 30 deletions(-)
drivers/net/vxlan/vxlan_core.c +28 -30
@@ -729,6 +729,32 @@ static int vxlan_fdb_append(struct vxlan_fdb *f,return 1 ; } +static bool vxlan_parse_gpe_proto (struct vxlanhdr *hdr,__be16 *protocol) +{ +struct vxlanhdr_gpe *gpe = (struct vxlanhdr_gpe *)hdr; + +/* Need to have Next Protocol set for interfaces in GPE mode. */ +if (!gpe->np_applied) +return false; +/* "The initial version is 0. If a receiver does not support the +* version indicated it MUST drop the packet. +*/ +if (gpe->version !=0 ) +return false; +/* "When the O bit is set to 1, the packet is an OAM packet and OAM +* processing MUST occur." However, we don't implement OAM +* processing, thus drop the packet. +*/ +if (gpe->oam_flag) +return false; + + *protocol =tun_p_to_eth_p (gpe->next_protocol); +if (!*protocol) +return false; + +return true; +} + static struct vxlanhdr *vxlan_gro_remcsum(struct sk_buff *skb, unsigned int off, struct vxlanhdr *vh, size_t hdrlen,
@@ -1737,35 +1763,6 @@ static void vxlan_parse_gbp_hdr(struct vxlanhdr *unparsed, unparsed->vx_flags &= ~VXLAN_GBP_USED_BITS ; } -static bool vxlan_parse_gpe_hdr (struct vxlanhdr *unparsed, -__be16 *protocol, -struct sk_buff *skb,u32 vxflags) -{ -struct vxlanhdr_gpe *gpe = (struct vxlanhdr_gpe *)unparsed; - -/* Need to have Next Protocol set for interfaces in GPE mode. */ -if (!gpe->np_applied) -return false; -/* "The initial version is 0. If a receiver does not support the -* version indicated it MUST drop the packet. -*/ -if (gpe->version !=0 ) -return false; -/* "When the O bit is set to 1, the packet is an OAM packet and OAM -* processing MUST occur." However, we don't implement OAM -* processing, thus drop the packet. -*/ -if (gpe->oam_flag) -return false; - - *protocol =tun_p_to_eth_p (gpe->next_protocol); -if (!*protocol) -return false; - - unparsed->vx_flags &= ~VXLAN_GPE_USED_BITS ; -return true; -} -static bool vxlan_set_mac (struct vxlan_dev *vxlan,struct vxlan_sock *vs,struct sk_buff *skb,__be32 vni)
@@ -1866,8 +1863,9 @@ static int vxlan_rcv(struct sock *sk, struct sk_buff *skb)* used by VXLAN extensions if explicitly requested. */ if (vs->flags &VXLAN_F_GPE ) { -if (!vxlan_parse_gpe_hdr (&unparsed, &protocol, skb, vs->flags)) +if (!vxlan_parse_gpe_proto (&unparsed, &protocol)) goto drop; + unparsed.vx_flags &= ~VXLAN_GPE_USED_BITS ; raw_proto = true; }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 36/406 m68k: Fix invalid .section syntax
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <[email protected]>
[ Upstream commit 922a9bd138101e3e5718f0f4d40dba68ef89bb43 ]
gas supports several different forms for .section for ELF targets, including:
.section NAME [, "FLAGS"[, @TYPE[,FLAG_SPECIFIC_ARGUMENTS]]]
and:
.section "NAME"[, #FLAGS...]
In several places we use a mix of these two forms:
.section NAME, #FLAGS...
A current development snapshot of binutils (2.40.50.20230611) treats this mixed syntax as an error.
Change to consistently use:
.section NAME, "FLAGS"
as is used elsewhere in the kernel.
--- arch/m68k/fpsp040/skeleton.S | 4 ++-- arch/m68k/ifpsp060/os.S | 4 ++-- arch/m68k/kernel/relocate_kernel.S | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-)
arch/m68k/fpsp040/skeleton.S +2 -2
@@ -499,12 +499,12 @@ in_ea: dbf %d0,morein rts - .section .fixup,#alloc,#execinstr + .section .fixup,"ax" .even 1: jbra fpsp040_die - .section __ex_table,#alloc + .section __ex_table,"a" .align 4 .long in_ea,1b
arch/m68k/ifpsp060/os.S +2 -2
@@ -379,11 +379,11 @@ _060_real_access: | Execption handling for movs access to illegal memory - .section .fixup,#alloc,#execinstr + .section .fixup,"ax" .even 1: moveq #-1,%d1 rts -.section __ex_table,#alloc +.section __ex_table,"a" .align 4 .long dmrbuae,1b .long dmrwuae,1b
arch/m68k/kernel/relocate_kernel.S +2 -2
@@ -26,7 +26,7 @@ ENTRY(relocate_new_kernel) lea %pc@(.Lcopy),%a4 2: addl #0x00000000,%a4 /* virt_to_phys() */ - .section ".m68k_fixup","aw" + .section .m68k_fixup,"aw" .long M68K_FIXUP_MEMOFFSET, 2b+2 .previous
@@ -49,7 +49,7 @@ ENTRY(relocate_new_kernel) lea %pc@(.Lcont040),%a4 5: addl #0x00000000,%a4 /* virt_to_phys() */ - .section ".m68k_fixup","aw" + .section .m68k_fixup,"aw" .long M68K_FIXUP_MEMOFFSET, 5b+2 .previous
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 37/406 s390/dasd: use correct number of retries for ERP requests
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Haberland <[email protected]>
[ Upstream commit acea28a6b74f458defda7417d2217b051ba7d444 ]
If a DASD request fails an error recovery procedure (ERP) request might be built as a copy of the original request to do error recovery.
The ERP request gets a number of retries assigned.
This number is always 256 no matter what other value might have been set for the original request. This is not what is expected when a user specifies a certain amount of retries for the device via sysfs.
Correctly use the number of retries of the original request for ERP requests.
--- drivers/s390/block/dasd_3990_erp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/s390/block/dasd_3990_erp.c +1 -1
@@ -2436,7 +2436,7 @@ static struct dasd_ccw_req *dasd_3990_erp_add_erp(struct dasd_ccw_req *cqr) erp->block = cqr->block; erp->magic = cqr->magic; erp->expires = cqr->expires; - erp->retries =256 ; + erp->retries = device->default_retries; erp->buildclk =get_tod_clock (); erp->status =DASD_CQR_FILLED ;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 38/406 s390/dasd: fix hanging device after request requeue
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Haberland <[email protected]>
[ Upstream commit 8a2278ce9c25048d999fe1a3561def75d963f471 ]
The DASD device driver has a function to requeue requests to the blocklayer.
This function is used in various cases when basic settings for the device have to be changed like High Performance Ficon related parameters or copy pair settings.
The functions iterates over the device->ccw_queue and also removes the requests from the block->ccw_queue.
In case the device is started on an alias device instead of the base device it might be removed from the block->ccw_queue without having it canceled properly before. This might lead to a hanging device since the request is no longer on a queue and can not be handled properly.
Fix by iterating over the block->ccw_queue instead of the device->ccw_queue. This will take care of all blocklayer related requests and handle them on all associated DASD devices.
--- drivers/s390/block/dasd.c | 125 +++++++++++++++----------------------- 1 file changed, 48 insertions(+), 77 deletions(-)
drivers/s390/block/dasd.c +48 -77
@@ -2985,41 +2985,32 @@ static void _dasd_wake_block_flush_cb(struct dasd_ccw_req *cqr, void *data)* Requeue a request back to the block request queue * only works for block requests */ -static int _dasd_requeue_request (struct dasd_ccw_req *cqr) +static void _dasd_requeue_request (struct dasd_ccw_req *cqr) { -struct dasd_block *block = cqr->block;struct request *req; -if (!block) -return -EINVAL ;/* * If the request is an ERP request there is nothing to requeue. * This will be done with the remaining original request. */ if (cqr->refers) -return 0 ; +return ;spin_lock_irq (&cqr->dq->lock); req = (struct request *) cqr->callback_data;blk_mq_requeue_request (req, true);spin_unlock_irq (&cqr->dq->lock); -return 0 ; +return ; } -/* -* Go through all request on the dasd_block request queue, cancel them -* on the respective dasd_device, and return them to the generic -* block layer. -*/ -static int dasd_flush_block_queue (struct dasd_block *block) +static int _dasd_requests_to_flushqueue (struct dasd_block *block, +struct list_head *flush_queue) {struct dasd_ccw_req *cqr, *n; -int rc, i; -struct list_head flush_queue;unsigned long flags; +int rc, i; -INIT_LIST_HEAD (&flush_queue); -spin_lock_bh (&block->queue_lock); +spin_lock_irqsave (&block->queue_lock, flags); rc =0 ; restart:list_for_each_entry_safe (cqr, n, &block->ccw_queue, blocklist) {
@@ -3034,13 +3025,32 @@ static int dasd_flush_block_queue(struct dasd_block *block)* is returned from the dasd_device layer. */ cqr->callback = _dasd_wake_block_flush_cb; -for (i =0 ; cqr !=NULL ; cqr = cqr->refers, i++) -list_move_tail (&cqr->blocklist, &flush_queue); +for (i =0 ; cqr; cqr = cqr->refers, i++) +list_move_tail (&cqr->blocklist, flush_queue);if (i >1 )/* moved more than one request - need to restart */ goto restart; } -spin_unlock_bh (&block->queue_lock); +spin_unlock_irqrestore (&block->queue_lock, flags); + +return rc; +} + +/* +* Go through all request on the dasd_block request queue, cancel them +* on the respective dasd_device, and return them to the generic +* block layer. +*/ +static int dasd_flush_block_queue (struct dasd_block *block) +{ +struct dasd_ccw_req *cqr, *n; +struct list_head flush_queue; +unsigned long flags; +int rc; + +INIT_LIST_HEAD (&flush_queue); + rc =_dasd_requests_to_flushqueue (block, &flush_queue); +/* Now call the callback function of flushed requests */ restart_cb:list_for_each_entry_safe (cqr, n, &flush_queue, blocklist) {
@@ -3977,75 +3987,36 @@ EXPORT_SYMBOL_GPL(dasd_generic_space_avail);*/ static int dasd_generic_requeue_all_requests (struct dasd_device *device) { +struct dasd_block *block = device->block;struct list_head requeue_queue;struct dasd_ccw_req *cqr, *n; -struct dasd_ccw_req *refers;int rc; -INIT_LIST_HEAD (&requeue_queue); -spin_lock_irq (get_ccwdev_lock (device->cdev)); - rc =0 ; -list_for_each_entry_safe (cqr, n, &device->ccw_queue, devlist) { -/* Check status and move request to flush_queue */ -if (cqr->status ==DASD_CQR_IN_IO ) { - rc = device->discipline->term_IO (cqr); -if (rc) { -/* unable to terminate requeust */ -dev_err (&device->cdev->dev, -"Unable to terminate request %p " -"on suspend\n" , cqr); -spin_unlock_irq (get_ccwdev_lock (device->cdev)); -dasd_put_device (device); -return rc; - } - } -list_move_tail (&cqr->devlist, &requeue_queue); - } -spin_unlock_irq (get_ccwdev_lock (device->cdev)); - -list_for_each_entry_safe (cqr, n, &requeue_queue, devlist) { -wait_event (dasd_flush_wq, - (cqr->status !=DASD_CQR_CLEAR_PENDING )); +if (!block) +return 0 ; -/* -* requeue requests to blocklayer will only work -* for block device requests -*/ -if (_dasd_requeue_request (cqr)) -continue ; +INIT_LIST_HEAD (&requeue_queue); + rc =_dasd_requests_to_flushqueue (block, &requeue_queue); -/* remove requests from device and block queue */ -list_del_init (&cqr->devlist); -while (cqr->refers !=NULL ) { - refers = cqr->refers; -/* remove the request from the block queue */ -list_del (&cqr->blocklist); -/* free the finished erp request */ -dasd_free_erp_request (cqr, cqr->memdev); - cqr = refers; +/* Now call the callback function of flushed requests */ +restart_cb: +list_for_each_entry_safe (cqr, n, &requeue_queue, blocklist) { +wait_event (dasd_flush_wq, (cqr->status <DASD_CQR_QUEUED )); +/* Process finished ERP request. */ +if (cqr->refers) { +spin_lock_bh (&block->queue_lock); +__dasd_process_erp (block->base, cqr); +spin_unlock_bh (&block->queue_lock); +/* restart list_for_xx loop since dasd_process_erp +* might remove multiple elements +*/ + goto restart_cb; } - -/* -* _dasd_requeue_request already checked for a valid -* blockdevice, no need to check again -* all erp requests (cqr->refers) have a cqr->block -* pointer copy from the original cqr -*/ +_dasd_requeue_request (cqr);list_del_init (&cqr->blocklist); cqr->block->base->discipline->free_cp ( cqr, (struct request *) cqr->callback_data); } - -/* -* if requests remain then they are internal request -* and go back to the device queue -*/ -if (!list_empty (&requeue_queue)) { -/* move freeze_queue to start of the ccw_queue */ -spin_lock_irq (get_ccwdev_lock (device->cdev)); -list_splice_tail (&requeue_queue, &device->ccw_queue); -spin_unlock_irq (get_ccwdev_lock (device->cdev)); - }dasd_schedule_device_bh (device);return rc; }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 39/406 fs/nls: make load_nls() take a const parameter
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Winston Wen <[email protected]>
[ Upstream commit c1ed39ec116272935528ca9b348b8ee79b0791da ]
load_nls() take a char * parameter, use it to find nls module in list or construct the module name to load it.
This change make load_nls() take a const parameter, so we don't need do some cast like this:
ses->local_nls = load_nls((char *)ctx->local_nls->charset);
--- fs/nls/nls_base.c | 4 ++-- include/linux/nls.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
fs/nls/nls_base.c +2 -2
@@ -272,7 +272,7 @@ int unregister_nls(struct nls_table * nls)return -EINVAL ; } -static struct nls_table *find_nls (char *charset) +static struct nls_table *find_nls (const char *charset) {struct nls_table *nls;spin_lock (&nls_lock);
@@ -288,7 +288,7 @@ static struct nls_table *find_nls(char *charset)return nls; } -struct nls_table *load_nls (char *charset) +struct nls_table *load_nls (const char *charset) {return try_then_request_module (find_nls (charset),"nls_%s" , charset); }
include/linux/nls.h +1 -1
@@ -47,7 +47,7 @@ enum utf16_endian {/* nls_base.c */ extern int __register_nls (struct nls_table *,struct module *);extern int unregister_nls (struct nls_table *); -extern struct nls_table *load_nls (char *); +extern struct nls_table *load_nls (const char *charset);extern void unload_nls (struct nls_table *);extern struct nls_table *load_nls_default (void );#define register_nls (nls) __register_nls((nls), THIS_MODULE)
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 22/406 pinctrl: amd: Dont show `Invalid config param` errors
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mario Limonciello <[email protected]>
commit 87b549efcb0f7934b0916d2a00607a878b6f1e0f upstream.
On some systems amd_pinconf_set() is called with parameters 0x8 (PIN_CONFIG_DRIVE_PUSH_PULL) or 0x14 (PIN_CONFIG_PERSIST_STATE) which are not supported by pinctrl-amd.
Don't show an err message when called with an invalid parameter, downgrade this to debug instead.
--- drivers/pinctrl/pinctrl-amd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/pinctrl/pinctrl-amd.c +2 -2
@@ -653,7 +653,7 @@ static int amd_pinconf_get(struct pinctrbreak ;default : -dev_err (&gpio_dev->pdev->dev,"Invalid config param %04x\n" , +dev_dbg (&gpio_dev->pdev->dev,"Invalid config param %04x\n" , param);return -ENOTSUPP ; }
@@ -706,7 +706,7 @@ static int amd_pinconf_set(struct pinctrbreak ;default : -dev_err (&gpio_dev->pdev->dev, +dev_dbg (&gpio_dev->pdev->dev,"Invalid config param %04x\n" , param); ret = -ENOTSUPP ; }
Greg Kroah-Hartman
maintainerPATCH 40/406 ASoc: codecs: ES8316: Fix DMIC config
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Edgar <[email protected]>
[ Upstream commit d20d35d1ad62c6cca36368c1e8f29335a068659e ]
According to the datasheet, the DMIC config should be changed to { 0, 2 ,3 }
--- sound/soc/codecs/es8316.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/es8316.c +1 -1
@@ -153,7 +153,7 @@ static const char * const es8316_dmic_txt[] = {"dmic data at high level" , "dmic data at low level", }; -static const unsigned int es8316_dmic_values[] = {0 ,1 ,2 }; +static const unsigned int es8316_dmic_values[] = {0 ,2 ,3 };static const struct soc_enum es8316_dmic_src_enum = SOC_VALUE_ENUM_SINGLE(ES8316_ADC_DMIC, 0, 3, ARRAY_SIZE(es8316_dmic_txt),
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 41/406 ASoC: atmel: Fix the 8K sample parameter in I2SC master
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guiting Shen <[email protected]>
[ Upstream commit f85739c0b2b0d98a32f5ca4fcc5501d2b76df4f6 ]
The 8K sample parameter of 12.288Mhz main system bus clock doesn't work because the I2SC_MR.IMCKDIV must not be 0 according to the sama5d2 series datasheet(I2SC Mode Register of Register Summary).
So use the 6.144Mhz instead of 12.288Mhz to support 8K sample.
--- sound/soc/atmel/atmel-i2s.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
sound/soc/atmel/atmel-i2s.c +4 -1
@@ -163,11 +163,14 @@ struct atmel_i2s_gck_param {#define I2S_MCK_12M288 12288000UL#define I2S_MCK_11M2896 11289600UL +#define I2S_MCK_6M144 6144000UL/* mck = (32 * (imckfs+1) / (imckdiv+1)) * fs */ static const struct atmel_i2s_gck_param gck_params[] = { +/* mck = 6.144Mhz */ + {8000 ,I2S_MCK_6M144 ,1 ,47 },/* mck = 768 fs */ +/* mck = 12.288MHz */ - {8000 ,I2S_MCK_12M288 ,0 ,47 },/* mck = 1536 fs */ {16000 ,I2S_MCK_12M288 ,1 ,47 },/* mck = 768 fs */ {24000 ,I2S_MCK_12M288 ,3 ,63 },/* mck = 512 fs */ {32000 ,I2S_MCK_12M288 ,3 ,47 },/* mck = 384 fs */
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 42/406 platform/x86: intel: hid: Always call BTNL ACPI method
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <[email protected]>
[ Upstream commit e3ab18de2b09361d6f0e4aafb9cfd6d002ce43a1 ]
On a HP Elite Dragonfly G2 the 0xcc and 0xcd events for SW_TABLET_MODE are only send after the BTNL ACPI method has been called.
Likely more devices need this, so make the BTNL ACPI method unconditional instead of only doing it on devices with a 5 button array.
Note this also makes the intel_button_array_enable() call in probe() unconditional, that function does its own priv->array check. This makes the intel_button_array_enable() call in probe() consistent with the calls done on suspend/resume which also rely on the priv->array check inside the function.
--- drivers/platform/x86/intel-hid.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-)
drivers/platform/x86/intel-hid.c +9 -12
@@ -458,7 +458,7 @@ static bool button_array_present(struct platform_device *device)static int intel_hid_probe (struct platform_device *device) {acpi_handle handle =ACPI_HANDLE (&device->dev); -unsigned long long mode; +unsigned long long mode, dummy;struct intel_hid_priv *priv;acpi_status status;int err;
@@ -510,18 +510,15 @@ static int intel_hid_probe(struct platform_device *device)if (err) goto err_remove_notify; -if (priv->array) { -unsigned long long dummy; +intel_button_array_enable (&device->dev, true); -intel_button_array_enable (&device->dev, true); - -/* Call button load method to enable HID power button */ -if (!intel_hid_evaluate_method (handle,INTEL_HID_DSM_BTNL_FN , - &dummy)) { -dev_warn (&device->dev, -"failed to enable HID power button\n" ); - } - } +/* +* Call button load method to enable HID power button +* Always do this since it activates events on some devices without +* a button array too. +*/ +if (!intel_hid_evaluate_method (handle,INTEL_HID_DSM_BTNL_FN , &dummy)) +dev_warn (&device->dev,"failed to enable HID power button\n" );device_init_wakeup (&device->dev, true);/*
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 43/406 platform/x86: huawei-wmi: Silence ambient light sensor
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Shelekhin <[email protected]>
[ Upstream commit c21733754cd6ecbca346f2adf9b17d4cfa50504f ]
Currently huawei-wmi causes a lot of spam in dmesg on my Huawei MateBook X Pro 2022:
...
[36409.328463] input input9: Unknown key pressed, code: 0x02c1 [36411.335104] input input9: Unknown key pressed, code: 0x02c1 [36412.338674] input input9: Unknown key pressed, code: 0x02c1 [36414.848564] input input9: Unknown key pressed, code: 0x02c1 [36416.858706] input input9: Unknown key pressed, code: 0x02c1 ...
Fix that by ignoring events generated by ambient light sensor.
This issue was reported on GitHub and resolved with the following merge request:
https://github.com/aymanbagabas/Huawei-WMI/pull/70
I've contacted the mainter of this repo and he gave me the "go ahead" to send this patch to the maling list.
--- drivers/platform/x86/huawei-wmi.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/platform/x86/huawei-wmi.c +2 -0
@@ -86,6 +86,8 @@ static const struct key_entry huawei_wmi_keymap[] = { { KE_IGNORE, 0x293, { KEY_KBDILLUMTOGGLE } }, { KE_IGNORE, 0x294, { KEY_KBDILLUMUP } }, { KE_IGNORE, 0x295, { KEY_KBDILLUMUP } }, +// Ignore Ambient Light Sensoring + { KE_KEY, 0x2c1, { KEY_RESERVED } }, { KE_END, 0 } };
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 44/406 drm/amd/display: Exit idle optimizations before attempt to access PHY
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Leo Chen <[email protected]>
[ Upstream commit de612738e9771bd66aeb20044486c457c512f684 ]
[Why & How]
DMUB may hang when powering down pixel clocks due to no dprefclk.
It is fixed by exiting idle optimization before the attempt to access PHY.
--- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +3 -0
@@ -1682,10 +1682,13 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context) hws->funcs.edp_backlight_control (edp_link_with_sink, false); }/*resume from S3, no vbios posting, no need to power down again*/ +clk_mgr_exit_optimized_pwr_state (dc, dc->clk_mgr); +power_down_all_hw_blocks (dc);disable_vga_and_power_gate_all_controllers (dc);if (edp_link_with_sink && !keep_edp_vdd_on) dc->hwss.edp_power_control (edp_link_with_sink, false); +clk_mgr_optimize_pwr_state (dc, dc->clk_mgr); }bios_set_scratch_acc_mode_change (dc->ctx->dc_bios); }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 45/406 ovl: Always reevaluate the file signature for IMA
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Snowberg <[email protected]>
[ Upstream commit 18b44bc5a67275641fb26f2c54ba7eef80ac5950 ]
Commit db1d1e8b9867 ("IMA: use vfs_getattr_nosec to get the i_version") partially closed an IMA integrity issue when directly modifying a file on the lower filesystem. If the overlay file is first opened by a user and later the lower backing file is modified by root, but the extended attribute is NOT updated, the signature validation succeeds with the old original signature.
Update the super_block s_iflags to SB_I_IMA_UNVERIFIABLE_SIGNATURE to force signature reevaluation on every file access until a fine grained solution can be found.
--- fs/overlayfs/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/overlayfs/super.c +1 -1
@@ -2028,7 +2028,7 @@ static int ovl_fill_super(struct super_block *sb, void *data, int silent) sb->s_xattr = ovl_xattr_handlers; sb->s_fs_info = ofs; sb->s_flags |=SB_POSIXACL ; - sb->s_iflags |=SB_I_SKIP_SYNC ; + sb->s_iflags |=SB_I_SKIP_SYNC |SB_I_IMA_UNVERIFIABLE_SIGNATURE ; err = -ENOMEM ; root_dentry =ovl_get_root (sb, upperpath.dentry, oe);
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 46/406 ata: pata_arasan_cf: Use dev_err_probe() instead dev_err() in data_xfer()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Minjie Du <[email protected]>
[ Upstream commit 4139f992c49356391fb086c0c8ce51f66c26d623 ]
It is possible for dma_request_chan() to return EPROBE_DEFER, which means acdev->host->dev is not ready yet. At this point dev_err() will have no output. Use dev_err_probe() instead.
--- drivers/ata/pata_arasan_cf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/ata/pata_arasan_cf.c +2 -1
@@ -528,7 +528,8 @@ static void data_xfer(struct work_struct *work)/* dma_request_channel may sleep, so calling from process context */ acdev->dma_chan =dma_request_chan (acdev->host->dev,"data" );if (IS_ERR (acdev->dma_chan)) { -dev_err (acdev->host->dev,"Unable to get dma_chan\n" ); +dev_err_probe (acdev->host->dev,PTR_ERR (acdev->dma_chan), +"Unable to get dma_chan\n" ); acdev->dma_chan =NULL ; goto chan_request_fail; }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 23/406 ASoC: rt5682: Fix a problem with error handling in the io init function of the soundwire
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oder Chiou <[email protected]>
commit 9266d95405ae0c078f188ec8bca3a004631be429 upstream.
The device checking error should be a jump to pm_runtime_put_autosuspend() as done before returning value.
--- sound/soc/codecs/rt5682-sdw.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
sound/soc/codecs/rt5682-sdw.c +5 -2
@@ -413,9 +413,11 @@ static int rt5682_io_init(struct deviceusleep_range (30000 ,30005 ); loop--; } +if (val !=DEVICE_ID ) {dev_err (dev,"Device with ID register %x is not rt5682\n" , val); -return -ENODEV ; + ret = -ENODEV ; + goto err_nodev; }rt5682_calibrate (rt5682);
@@ -486,10 +488,11 @@ reinit: rt5682->hw_init = true; rt5682->first_hw_init = true; +err_nodev:pm_runtime_mark_last_busy (&slave->dev);pm_runtime_put_autosuspend (&slave->dev); -dev_dbg (&slave->dev,"%s hw_init complete\n" , __func__); +dev_dbg (&slave->dev,"%s hw_init complete: %d\n" , __func__, ret);return ret; }
Greg Kroah-Hartman
maintainerPATCH 24/406 ARM: dts: imx: update sdma node name format
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joy Zou <[email protected]>
[ Upstream commit 6769089ecb5073b0896addffe72c89a4d80258c9 ]
Node names should be generic, so change the sdma node name format 'sdma' into 'dma-controller'.
Stable-dep-of: be18293e47cb ("ARM: dts: imx: Set default tuning step for imx7d usdhc")
--- arch/arm/boot/dts/imx25.dtsi | 2 +- arch/arm/boot/dts/imx31.dtsi | 2 +- arch/arm/boot/dts/imx35.dtsi | 2 +- arch/arm/boot/dts/imx50.dtsi | 2 +- arch/arm/boot/dts/imx51.dtsi | 2 +- arch/arm/boot/dts/imx53.dtsi | 2 +- arch/arm/boot/dts/imx6qdl.dtsi | 2 +- arch/arm/boot/dts/imx6sl.dtsi | 2 +- arch/arm/boot/dts/imx6sx.dtsi | 2 +- arch/arm/boot/dts/imx6ul.dtsi | 2 +- arch/arm/boot/dts/imx7s.dtsi | 2 +- 11 files changed, 11 insertions(+), 11 deletions(-)
arch/arm/boot/dts/imx25.dtsi +1 -1
@@ -515,7 +515,7 @@ #interrupt-cells = <2>; }; - sdma: sdma@53fd4000 { + sdma: dma-controller@53fd4000 { compatible = "fsl,imx25-sdma"; reg = <0x53fd4000 0x4000>; clocks = <&clks 112>, <&clks 68>;
arch/arm/boot/dts/imx31.dtsi +1 -1
@@ -297,7 +297,7 @@ #interrupt-cells = <2>; }; - sdma: sdma@53fd4000 { + sdma: dma-controller@53fd4000 { compatible = "fsl,imx31-sdma"; reg = <0x53fd4000 0x4000>; interrupts = <34>;
arch/arm/boot/dts/imx35.dtsi +1 -1
@@ -284,7 +284,7 @@ #interrupt-cells = <2>; }; - sdma: sdma@53fd4000 { + sdma: dma-controller@53fd4000 { compatible = "fsl,imx35-sdma"; reg = <0x53fd4000 0x4000>; clocks = <&clks 9>, <&clks 65>;
arch/arm/boot/dts/imx50.dtsi +1 -1
@@ -421,7 +421,7 @@ status = "disabled"; }; - sdma: sdma@63fb0000 { + sdma: dma-controller@63fb0000 { compatible = "fsl,imx50-sdma", "fsl,imx35-sdma"; reg = <0x63fb0000 0x4000>; interrupts = <6>;
arch/arm/boot/dts/imx51.dtsi +1 -1
@@ -498,7 +498,7 @@ status = "disabled"; }; - sdma: sdma@83fb0000 { + sdma: dma-controller@83fb0000 { compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; reg = <0x83fb0000 0x4000>; interrupts = <6>;
arch/arm/boot/dts/imx53.dtsi +1 -1
@@ -710,7 +710,7 @@ status = "disabled"; }; - sdma: sdma@63fb0000 { + sdma: dma-controller@63fb0000 { compatible = "fsl,imx53-sdma", "fsl,imx35-sdma"; reg = <0x63fb0000 0x4000>; interrupts = <6>;
arch/arm/boot/dts/imx6qdl.dtsi +1 -1
@@ -927,7 +927,7 @@ interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>; }; - sdma: sdma@20ec000 { + sdma: dma-controller@20ec000 { compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
arch/arm/boot/dts/imx6sl.dtsi +1 -1
@@ -752,7 +752,7 @@ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; }; - sdma: sdma@20ec000 { + sdma: dma-controller@20ec000 { compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
arch/arm/boot/dts/imx6sx.dtsi +1 -1
@@ -848,7 +848,7 @@ reg = <0x020e4000 0x4000>; }; - sdma: sdma@20ec000 { + sdma: dma-controller@20ec000 { compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma"; reg = <0x020ec000 0x4000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
arch/arm/boot/dts/imx6ul.dtsi +1 -1
@@ -743,7 +743,7 @@ status = "disabled"; }; - sdma: sdma@20ec000 { + sdma: dma-controller@20ec000 { compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>;
arch/arm/boot/dts/imx7s.dtsi +1 -1
@@ -1177,7 +1177,7 @@ status = "disabled"; }; - sdma: sdma@30bd0000 { + sdma: dma-controller@30bd0000 { compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma"; reg = <0x30bd0000 0x10000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 25/406 ARM: dts: imx7s: Drop dma-apb interrupt-names
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marek Vasut <[email protected]>
[ Upstream commit 9928f0a9e7c0cee3360ca1442b4001d34ad67556 ]
Drop "interrupt-names" property, since it is broken. The drivers/dma/mxs-dma.c in Linux kernel does not use it, the property contains duplicate array entries in existing DTs, and even malformed entries (gmpi, should have been gpmi). Get rid of that optional property altogether.
Stable-dep-of: be18293e47cb ("ARM: dts: imx: Set default tuning step for imx7d usdhc")
--- arch/arm/boot/dts/imx7s.dtsi | 1 - 1 file changed, 1 deletion(-)
arch/arm/boot/dts/imx7s.dtsi +0 -1
@@ -1217,7 +1217,6 @@ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; #dma-cells = <1>; dma-channels = <4>; clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 26/406 ARM: dts: imx: Adjust dma-apbh node name
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Wahren <[email protected]>
[ Upstream commit e9f5cd85f1f931bb7b64031492f7051187ccaac7 ]
Currently the dtbs_check generates warnings like this:
$nodename:0: 'dma-apbh@110000' does not match '^dma-controller(@.*)?$'
So fix all affected dma-apbh node names.
Stable-dep-of: be18293e47cb ("ARM: dts: imx: Set default tuning step for imx7d usdhc")
--- arch/arm/boot/dts/imx23.dtsi | 2 +- arch/arm/boot/dts/imx28.dtsi | 2 +- arch/arm/boot/dts/imx6qdl.dtsi | 2 +- arch/arm/boot/dts/imx6sx.dtsi | 2 +- arch/arm/boot/dts/imx6ul.dtsi | 2 +- arch/arm/boot/dts/imx7s.dtsi | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-)
arch/arm/boot/dts/imx23.dtsi +1 -1
@@ -59,7 +59,7 @@ reg = <0x80000000 0x2000>; }; - dma_apbh: dma-apbh@80004000 { + dma_apbh: dma-controller@80004000 { compatible = "fsl,imx23-dma-apbh"; reg = <0x80004000 0x2000>; interrupts = <0 14 20 0
arch/arm/boot/dts/imx28.dtsi +1 -1
@@ -78,7 +78,7 @@ status = "disabled"; }; - dma_apbh: dma-apbh@80004000 { + dma_apbh: dma-controller@80004000 { compatible = "fsl,imx28-dma-apbh"; reg = <0x80004000 0x2000>; interrupts = <82 83 84 85
arch/arm/boot/dts/imx6qdl.dtsi +1 -1
@@ -150,7 +150,7 @@ interrupt-parent = <&gpc>; ranges; - dma_apbh: dma-apbh@110000 { + dma_apbh: dma-controller@110000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x00110000 0x2000>; interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
arch/arm/boot/dts/imx6sx.dtsi +1 -1
@@ -209,7 +209,7 @@ power-domains = <&pd_pu>; }; - dma_apbh: dma-apbh@1804000 { + dma_apbh: dma-controller@1804000 { compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x01804000 0x2000>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
arch/arm/boot/dts/imx6ul.dtsi +1 -1
@@ -164,7 +164,7 @@ <0x00a06000 0x2000>; }; - dma_apbh: dma-apbh@1804000 { + dma_apbh: dma-controller@1804000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x01804000 0x2000>; interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
arch/arm/boot/dts/imx7s.dtsi +1 -1
@@ -1210,7 +1210,7 @@ }; }; - dma_apbh: dma-apbh@33000000 { + dma_apbh: dma-controller@33000000 { compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x33000000 0x2000>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 27/406 ARM: dts: imx: Set default tuning step for imx7d usdhc
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xiaolei Wang <[email protected]>
[ Upstream commit be18293e47cbca7c6acee9231fc851601d69563a ]
If the tuning step is not set, the tuning step is set to 1. For some sd cards, the following Tuning timeout will occur.
Tuning failed, falling back to fixed sampling clock
mmc0: Tuning failed, falling back to fixed sampling clock
So set the default tuning step. This refers to the NXP vendor's commit below:
https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/
arch/arm/boot/dts/imx7s.dtsi#L1216-L1217
--- arch/arm/boot/dts/imx7s.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm/boot/dts/imx7s.dtsi +6 -0
@@ -1137,6 +1137,8 @@ <&clks IMX7D_USDHC1_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; status = "disabled"; };
@@ -1149,6 +1151,8 @@ <&clks IMX7D_USDHC2_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; status = "disabled"; };
@@ -1161,6 +1165,8 @@ <&clks IMX7D_USDHC3_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; status = "disabled"; };
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 28/406 phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrien Thierry <[email protected]>
[ Upstream commit 8932089b566c24ea19b57e37704c492678de1420 ]
The return value from qcom_snps_hsphy_suspend/resume is not used. Make sure qcom_snps_hsphy_runtime_suspend/resume return this value as well.
--- drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c +2 -4
@@ -171,8 +171,7 @@ static int __maybe_unused qcom_snps_hsphy_runtime_suspend(struct device *dev)if (!hsphy->phy_initialized)return 0 ; -qcom_snps_hsphy_suspend (hsphy); -return 0 ; +return qcom_snps_hsphy_suspend (hsphy); }static int __maybe_unused qcom_snps_hsphy_runtime_resume (struct device *dev)
@@ -182,8 +181,7 @@ static int __maybe_unused qcom_snps_hsphy_runtime_resume(struct device *dev)if (!hsphy->phy_initialized)return 0 ; -qcom_snps_hsphy_resume (hsphy); -return 0 ; +return qcom_snps_hsphy_resume (hsphy); } static int qcom_snps_hsphy_set_mode(struct phy *phy, enum phy_mode mode,
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 29/406 media: pulse8-cec: handle possible ping error
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Antipov <[email protected]>
[ Upstream commit 92cbf865ea2e0f2997ff97815c6db182eb23df1b ]
Handle (and warn about) possible error waiting for MSGCODE_PING result.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
--- drivers/media/cec/usb/pulse8/pulse8-cec.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/media/cec/usb/pulse8/pulse8-cec.c +5 -2
@@ -809,8 +809,11 @@ static void pulse8_ping_eeprom_work_handler(struct work_struct *work)mutex_lock (&pulse8->lock); cmd =MSGCODE_PING ; -pulse8_send_and_wait (pulse8, &cmd,1 , -MSGCODE_COMMAND_ACCEPTED ,0 ); +if (pulse8_send_and_wait (pulse8, &cmd,1 , +MSGCODE_COMMAND_ACCEPTED ,0 )) { +dev_warn (pulse8->dev,"failed to ping EEPROM\n" ); + goto unlock; + }if (pulse8->vers <2 ) goto unlock;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 20/406 nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ryusuke Konishi <[email protected]>
commit f83913f8c5b882a312e72b7669762f8a5c9385e4 upstream.
A syzbot stress test reported that create_empty_buffers() called from nilfs_lookup_dirty_data_buffers() can cause a general protection fault.
Analysis using its reproducer revealed that the back reference "mapping" from a page/folio has been changed to NULL after dirty page/folio gang lookup in nilfs_lookup_dirty_data_buffers().
Fix this issue by excluding pages/folios from being collected if, after acquiring a lock on each page/folio, its back reference "mapping" differs from the pointer to the address space struct that held the page/folio.
---fs/nilfs2/segment.c | 5 +++++
fs/nilfs2/segment.c | 5 +++++ 1 file changed, 5 insertions(+)
fs/nilfs2/segment.c +5 -0
@@ -730,6 +730,11 @@ static size_t nilfs_lookup_dirty_data_bustruct page *page = pvec.pages[i];lock_page (page); +if (unlikely (page->mapping != mapping)) { +/* Exclude pages removed from the address space */ +unlock_page (page); +continue ; + }if (!page_has_buffers (page))create_empty_buffers (page,i_blocksize (inode),0 );unlock_page (page);
Greg Kroah-Hartman
maintainerPATCH 48/406 kprobes: Prohibit probing on CFI preamble symbol
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Masami Hiramatsu (Google) <[email protected]>
[ Upstream commit de02f2ac5d8cfb311f44f2bf144cc20002f1fbbd ]
Do not allow to probe on "__cfi_" or "__pfx_" started symbol, because those are used for CFI and not executed. Probing it will break the CFI.
--- kernel/kprobes.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
kernel/kprobes.c +13 -1
@@ -1628,6 +1628,17 @@ int __weak arch_check_ftrace_location(struct kprobe *p)return 0 ; } +static bool is_cfi_preamble_symbol (unsigned long addr) +{ +char symbuf[KSYM_NAME_LEN ]; + +if (lookup_symbol_name (addr, symbuf)) +return false; + +return str_has_prefix ("__cfi_" , symbuf) || +str_has_prefix ("__pfx_" , symbuf); +} +static int check_kprobe_address_safe (struct kprobe *p,struct module **probed_mod) {
@@ -1646,7 +1657,8 @@ static int check_kprobe_address_safe(struct kprobe *p,within_kprobe_blacklist ((unsigned long ) p->addr) ||jump_label_text_reserved (p->addr, p->addr) ||static_call_text_reserved (p->addr, p->addr) || - find_bug((unsigned long)p->addr)) { +find_bug ((unsigned long )p->addr) || + is_cfi_preamble_symbol((unsigned long)p->addr)) { ret = -EINVAL; goto out; }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 57/406 scsi: storvsc: Always set no_report_opcodes
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Kelley <[email protected]>
[ Upstream commit 31d16e712bdcaee769de4780f72ff8d6cd3f0589 ]
Hyper-V synthetic SCSI devices do not support the MAINTENANCE_IN SCSI command, so scsi_report_opcode() always fails, resulting in messages like this:
hv_storvsc <guid>: tag#205 cmd 0xa3 status: scsi 0x2 srb 0x86 hv 0xc0000001
The recently added support for command duration limits calls scsi_report_opcode() four times as each device comes online, which significantly increases the number of messages logged in a system with many disks.
Fix the problem by always marking Hyper-V synthetic SCSI devices as not supporting scsi_report_opcode(). With this setting, the MAINTENANCE_IN SCSI command is not issued and no messages are logged.
--- drivers/scsi/storvsc_drv.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/scsi/storvsc_drv.c +2 -0
@@ -1537,6 +1537,8 @@ static int storvsc_device_configure(struct scsi_device *sdevice) {blk_queue_rq_timeout (sdevice->request_queue, (storvsc_timeout *HZ )); +/* storvsc devices don't support MAINTENANCE_IN SCSI cmd */ + sdevice->no_report_opcodes =1 ; sdevice->no_write_same =1 ;/*
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 58/406 ALSA: seq: oss: Fix racy open/close of MIDI devices
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
[ Upstream commit 297224fc0922e7385573a30c29ffdabb67f27b7d ]
Although snd_seq_oss_midi_open() and snd_seq_oss_midi_close() can be called concurrently from different code paths, we have no proper data protection against races. Introduce open_mutex to each seq_oss_midi object for avoiding the races.
--- sound/core/seq/oss/seq_oss_midi.c | 35 +++++++++++++++++++------------ 1 file changed, 22 insertions(+), 13 deletions(-)
sound/core/seq/oss/seq_oss_midi.c +22 -13
@@ -37,6 +37,7 @@ struct seq_oss_midi {struct snd_midi_event *coder;/* MIDI event coder */ struct seq_oss_devinfo *devinfo;/* assigned OSSseq device */ snd_use_lock_t use_lock; +struct mutex open_mutex; };
@@ -171,6 +172,7 @@ snd_seq_oss_midi_check_new_port(struct snd_seq_port_info *pinfo) mdev->flags = pinfo->capability; mdev->opened =0 ;snd_use_lock_init (&mdev->use_lock); +mutex_init (&mdev->open_mutex);/* copy and truncate the name of synth device */ strlcpy (mdev->name, pinfo->name,sizeof (mdev->name));
@@ -319,14 +321,16 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode)int perm;struct seq_oss_midi *mdev;struct snd_seq_port_subscribe subs; +int err;if ((mdev =get_mididev (dp, dev)) ==NULL )return -ENODEV ; +mutex_lock (&mdev->open_mutex);/* already used? */ if (mdev->opened && mdev->devinfo != dp) { -snd_use_lock_free (&mdev->use_lock); -return -EBUSY ; + err = -EBUSY ; + goto unlock; } perm =0 ;
@@ -336,14 +340,14 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) perm |=PERM_READ ; perm &= mdev->flags;if (perm ==0 ) { -snd_use_lock_free (&mdev->use_lock); -return -ENXIO ; + err = -ENXIO ; + goto unlock; }/* already opened? */ if ((mdev->opened & perm) == perm) { -snd_use_lock_free (&mdev->use_lock); -return 0 ; + err =0 ; + goto unlock; } perm &= ~mdev->opened;
@@ -368,13 +372,17 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) }if (! mdev->opened) { -snd_use_lock_free (&mdev->use_lock); -return -ENXIO ; + err = -ENXIO ; + goto unlock; } mdev->devinfo = dp; + err =0 ; + + unlock: +mutex_unlock (&mdev->open_mutex);snd_use_lock_free (&mdev->use_lock); -return 0 ; +return err; }/*
@@ -388,10 +396,9 @@ snd_seq_oss_midi_close(struct seq_oss_devinfo *dp, int dev)if ((mdev =get_mididev (dp, dev)) ==NULL )return -ENODEV ; -if (! mdev->opened || mdev->devinfo != dp) { -snd_use_lock_free (&mdev->use_lock); -return 0 ; - } +mutex_lock (&mdev->open_mutex); +if (!mdev->opened || mdev->devinfo != dp) + goto unlock;memset (&subs,0 ,sizeof (subs));if (mdev->opened &PERM_WRITE ) {
@@ -410,6 +417,8 @@ snd_seq_oss_midi_close(struct seq_oss_devinfo *dp, int dev) mdev->opened =0 ; mdev->devinfo =NULL ; + unlock: +mutex_unlock (&mdev->open_mutex);snd_use_lock_free (&mdev->use_lock);return 0 ; }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 59/406 tracing: Introduce pipe_cpumask to avoid race on trace_pipes
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zheng Yejian <[email protected]>
[ Upstream commit c2489bb7e6be2e8cdced12c16c42fa128403ac03 ]
There is race issue when concurrently splice_read main trace_pipe and per_cpu trace_pipes which will result in data read out being different from what actually writen.
As suggested by Steven:
Quoted 11 lines
I believe we should add a ref count to
trace_pipeand theper_cputrace_pipes, where if they are opened, nothing else can read it.Opening
trace_pipelocks allper_cpuref counts, if any of them are open, then thetrace_pipeopen will fail (and releases any ref counts it had taken).Opening a
per_cputrace_pipewill up the ref count for just that CPU buffer. This will allow multiple tasks to read differentper_cputrace_pipefiles, but will prevent the maintrace_pipefile from being opened.
But because we only need to know whether per_cpu trace_pipe is open or not, using a cpumask instead of using ref count may be easier.
After this patch, users will find that:
- Main trace_pipe can be opened by only one user, and if it is opened, all per_cpu trace_pipes cannot be opened;
- Per_cpu trace_pipes can be opened by multiple users, but each per_cpu trace_pipe can only be opened by one user. And if one of them is opened, main trace_pipe cannot be opened.
--- kernel/trace/trace.c | 55 ++++++++++++++++++++++++++++++++++++++------ kernel/trace/trace.h | 2 ++ 2 files changed, 50 insertions(+), 7 deletions(-)
kernel/trace/trace.c +48 -7
@@ -6255,10 +6255,36 @@ tracing_max_lat_write(struct file *filp, const char __user *ubuf,#endif +static int open_pipe_on_cpu (struct trace_array *tr,int cpu) +{ +if (cpu ==RING_BUFFER_ALL_CPUS ) { +if (cpumask_empty (tr->pipe_cpumask)) { +cpumask_setall (tr->pipe_cpumask); +return 0 ; + } + }else if (!cpumask_test_cpu (cpu, tr->pipe_cpumask)) { +cpumask_set_cpu (cpu, tr->pipe_cpumask); +return 0 ; + } +return -EBUSY ; +} + +static void close_pipe_on_cpu (struct trace_array *tr,int cpu) +{ +if (cpu ==RING_BUFFER_ALL_CPUS ) { +WARN_ON (!cpumask_full (tr->pipe_cpumask)); +cpumask_clear (tr->pipe_cpumask); + }else { +WARN_ON (!cpumask_test_cpu (cpu, tr->pipe_cpumask)); +cpumask_clear_cpu (cpu, tr->pipe_cpumask); + } +} +static int tracing_open_pipe (struct inode *inode,struct file *filp) {struct trace_array *tr = inode->i_private;struct trace_iterator *iter; +int cpu;int ret; ret =tracing_check_open_get_tr (tr);
@@ -6266,13 +6292,16 @@ static int tracing_open_pipe(struct inode *inode, struct file *filp)return ret;mutex_lock (&trace_types_lock); + cpu =tracing_get_cpu (inode); + ret =open_pipe_on_cpu (tr, cpu); +if (ret) + goto fail_pipe_on_cpu;/* create a buffer to store the information to pass to userspace */ iter =kzalloc (sizeof (*iter),GFP_KERNEL );if (!iter) { ret = -ENOMEM ; -__trace_array_put (tr); - goto out; + goto fail_alloc_iter; }trace_seq_init (&iter->seq);
@@ -6295,7 +6324,7 @@ static int tracing_open_pipe(struct inode *inode, struct file *filp) iter->tr = tr; iter->array_buffer = &tr->array_buffer; - iter->cpu_file =tracing_get_cpu (inode); + iter->cpu_file = cpu;mutex_init (&iter->mutex); filp->private_data = iter;
@@ -6305,12 +6334,15 @@ static int tracing_open_pipe(struct inode *inode, struct file *filp)nonseekable_open (inode, filp); tr->trace_ref++; -out: +mutex_unlock (&trace_types_lock);return ret; fail:kfree (iter); +fail_alloc_iter: +close_pipe_on_cpu (tr, cpu); +fail_pipe_on_cpu:__trace_array_put (tr);mutex_unlock (&trace_types_lock);return ret;
@@ -6327,7 +6359,7 @@ static int tracing_release_pipe(struct inode *inode, struct file *file)if (iter->trace->pipe_close) iter->trace->pipe_close (iter); - +close_pipe_on_cpu (tr, iter->cpu_file);mutex_unlock (&trace_types_lock);free_cpumask_var (iter->started);
@@ -8851,6 +8883,9 @@ static struct trace_array *trace_array_create(const char *name)if (!alloc_cpumask_var (&tr->tracing_cpumask,GFP_KERNEL )) goto out_free_tr; +if (!alloc_cpumask_var (&tr->pipe_cpumask,GFP_KERNEL )) + goto out_free_tr; + tr->trace_flags = global_trace.trace_flags & ~ZEROED_TRACE_FLAGS ;cpumask_copy (tr->tracing_cpumask, cpu_all_mask);
@@ -8892,6 +8927,7 @@ static struct trace_array *trace_array_create(const char *name) out_free_tr:ftrace_free_ftrace_ops (tr);free_trace_buffers (tr); +free_cpumask_var (tr->pipe_cpumask);free_cpumask_var (tr->tracing_cpumask);kfree (tr->name);kfree (tr);
@@ -8993,6 +9029,7 @@ static int __remove_instance(struct trace_array *tr) }kfree (tr->topts); +free_cpumask_var (tr->pipe_cpumask);free_cpumask_var (tr->tracing_cpumask);kfree (tr->name);kfree (tr);
@@ -9692,12 +9729,14 @@ __init static int tracer_alloc_buffers(void)if (trace_create_savedcmd () <0 ) goto out_free_temp_buffer; +if (!alloc_cpumask_var (&global_trace.pipe_cpumask,GFP_KERNEL )) + goto out_free_savedcmd; +/* TODO: make the number of buffers hot pluggable with CPUS */ if (allocate_trace_buffers (&global_trace, ring_buf_size) <0 ) {MEM_FAIL (1 ,"tracer: failed to allocate ring buffer!\n" ); - goto out_free_savedcmd; + goto out_free_pipe_cpumask; } -if (global_trace.buffer_disabled)tracing_off ();
@@ -9748,6 +9787,8 @@ __init static int tracer_alloc_buffers(void)return 0 ; +out_free_pipe_cpumask: +free_cpumask_var (global_trace.pipe_cpumask); out_free_savedcmd:free_saved_cmdlines_buffer (savedcmd); out_free_temp_buffer:
kernel/trace/trace.h +2 -0
@@ -356,6 +356,8 @@ struct trace_array {struct list_head events;struct trace_event_file *trace_marker_file;cpumask_var_t tracing_cpumask;/* only trace on set CPUs */ +/* one per_cpu trace_pipe can be opened by only one user */ +cpumask_var_t pipe_cpumask;int ref;int trace_ref;#ifdef CONFIG_FUNCTION_TRACER
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 60/406 platform/mellanox: Fix mlxbf-tmfifo not handling all virtio CONSOLE notifications
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shih-Yi Chen <[email protected]>
[ Upstream commit 0848cab765c634597636810bf76d0934003cce28 ]
rshim console does not show all entries of dmesg.
Fixed by setting MLXBF_TM_TX_LWM_IRQ for every CONSOLE notification.
--- drivers/platform/mellanox/mlxbf-tmfifo.c | 1 + 1 file changed, 1 insertion(+)
drivers/platform/mellanox/mlxbf-tmfifo.c +1 -0
@@ -868,6 +868,7 @@ static bool mlxbf_tmfifo_virtio_notify(struct virtqueue *vq) tm_vdev = fifo->vdev[VIRTIO_ID_CONSOLE ];mlxbf_tmfifo_console_output (tm_vdev, vring);spin_unlock_irqrestore (&fifo->spin_lock[0 ], flags); +set_bit (MLXBF_TM_TX_LWM_IRQ , &fifo->pend_events); }else if (test_and_set_bit (MLXBF_TM_TX_LWM_IRQ , &fifo->pend_events)) {return true;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 61/406 net: Avoid address overwrite in kernel_connect
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jordan Rife <[email protected]>
commit 0bdf399342c5acbd817c9098b6c7ed21f1974312 upstream.
BPF programs that run on connect can rewrite the connect address. For the connect system call this isn't a problem, because a copy of the address is made when it is moved into kernel space. However, kernel_connect simply passes through the address it is given, so the caller may observe its address value unexpectedly change.
A practical example where this is problematic is where NFS is combined with a system such as Cilium which implements BPF-based load balancing. A common pattern in software-defined storage systems is to have an NFS mount that connects to a persistent virtual IP which in turn maps to an ephemeral server IP. This is usually done to achieve high availability:
if your server goes down you can quickly spin up a replacement and remap the virtual IP to that endpoint. With BPF-based load balancing, mounts will forget the virtual IP address when the address rewrite occurs because a pointer to the only copy of that address is passed down the stack. Server failover then breaks, because clients have forgotten the virtual IP address. Reconnects fail and mounts remain broken. This patch was tested by setting up a scenario like this and ensuring that NFS reconnects worked after applying the patch.
--- net/socket.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
net/socket.c +5 -1
@@ -3467,7 +3467,11 @@ EXPORT_SYMBOL(kernel_accept);int kernel_connect (struct socket *sock,struct sockaddr *addr,int addrlen,int flags) { -return sock->ops->connect (sock, addr, addrlen, flags); +struct sockaddr_storage address; + +memcpy (&address, addr, addrlen); + +return sock->ops->connect (sock, (struct sockaddr *)&address, addrlen, flags); }EXPORT_SYMBOL (kernel_connect);
Greg Kroah-Hartman
maintainerPATCH 62/406 udf: Check consistency of Space Bitmap Descriptor
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vladislav Efanov <[email protected]>
commit 1e0d4adf17e7ef03281d7b16555e7c1508c8ed2d upstream.
Bits, which are related to Bitmap Descriptor logical blocks, are not reset when buffer headers are allocated for them. As the result, these logical blocks can be treated as free and be used for other blocks.This can cause usage of one buffer header for several types of data. UDF issues WARNING in this situation:
WARNING: CPU: 0 PID: 2703 at fs/udf/inode.c:2014 __udf_add_aext+0x685/0x7d0 fs/udf/inode.c:2014 RIP: 0010:__udf_add_aext+0x685/0x7d0 fs/udf/inode.c:2014 Call Trace: udf_setup_indirect_aext+0x573/0x880 fs/udf/inode.c:1980 udf_add_aext+0x208/0x2e0 fs/udf/inode.c:2067 udf_insert_aext fs/udf/inode.c:2233 [inline] udf_update_extents fs/udf/inode.c:1181 [inline] inode_getblk+0x1981/0x3b70 fs/udf/inode.c:885
Found by Linux Verification Center (linuxtesting.org) with syzkaller.
[JK: Somewhat cleaned up the boundary checks]
--- fs/udf/balloc.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-)
fs/udf/balloc.c +27 -4
@@ -36,18 +36,41 @@ static int read_block_bitmap(struct supe unsigned long bitmap_nr) {struct buffer_head *bh =NULL ; -int retval =0 ; +int i; +int max_bits, off, count;struct kernel_lb_addr loc; loc.logicalBlockNum = bitmap->s_extPosition; loc.partitionReferenceNum =UDF_SB (sb)->s_partition; bh =udf_tread (sb,udf_get_lb_pblock (sb, &loc, block)); + bitmap->s_block_bitmap[bitmap_nr] = bh;if (!bh) - retval = -EIO ; +return -EIO ; - bitmap->s_block_bitmap[bitmap_nr] = bh; -return retval; +/* Check consistency of Space Bitmap buffer. */ + max_bits = sb->s_blocksize *8 ; +if (!bitmap_nr) { + off =sizeof (struct spaceBitmapDesc ) <<3 ; + count =min (max_bits - off, bitmap->s_nr_groups); + }else { +/* +* Rough check if bitmap number is too big to have any bitmap +* blocks reserved. +*/ +if (bitmap_nr > + (bitmap->s_nr_groups >> (sb->s_blocksize_bits +3 )) +2 ) +return 0 ; + off =0 ; + count = bitmap->s_nr_groups - bitmap_nr * max_bits + + (sizeof (struct spaceBitmapDesc ) <<3 ); + count =min (count, max_bits); + } + +for (i =0 ; i < count; i++) +if (udf_test_bit (i + off, bh->b_data)) +return -EFSCORRUPTED ; +return 0 ; } static int __load_block_bitmap(struct super_block *sb,
Greg Kroah-Hartman
maintainerPATCH 63/406 udf: Handle error when adding extent to a file
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
commit 19fd80de0a8b5170ef34704c8984cca920dffa59 upstream.
When adding extent to a file fails, so far we've silently squelshed the error. Make sure to propagate it up properly.
--- fs/udf/inode.c | 41 +++++++++++++++++++++++++++-------------- 1 file changed, 27 insertions(+), 14 deletions(-)
fs/udf/inode.c +27 -14
@@ -57,15 +57,15 @@ static int udf_update_inode(struct inodestatic int udf_sync_inode (struct inode *inode);static int udf_alloc_i_data (struct inode *inode,size_t size);static sector_t inode_getblk (struct inode *,sector_t ,int *,int *); -static int8_t udf_insert_aext (struct inode *,struct extent_position , -struct kernel_lb_addr ,uint32_t ); +static int udf_insert_aext (struct inode *,struct extent_position , +struct kernel_lb_addr ,uint32_t );static void udf_split_extents (struct inode *,int *,int ,udf_pblk_t ,struct kernel_long_ad *,int *);static void udf_prealloc_extents (struct inode *,int ,int ,struct kernel_long_ad *,int *);static void udf_merge_extents (struct inode *,struct kernel_long_ad *,int *); -static void udf_update_extents (struct inode *,struct kernel_long_ad *,int , -int ,struct extent_position *); +static int udf_update_extents (struct inode *,struct kernel_long_ad *,int , +int ,struct extent_position *);static int udf_get_block (struct inode *,sector_t ,struct buffer_head *,int );static void __udf_clear_extent_cache (struct inode *inode)
@@ -887,7 +887,9 @@ static sector_t inode_getblk(struct inod/* write back the new extents, inserting new extents if the new number * of extents is greater than the old number, and deleting extents if * the new number of extents is less than the old number */ -udf_update_extents (inode, laarr, startnum, endnum, &prev_epos); + *err =udf_update_extents (inode, laarr, startnum, endnum, &prev_epos); +if (*err <0 ) + goto out_free; newblock =udf_get_pblock (inode->i_sb, newblocknum, iinfo->i_location.partitionReferenceNum,0 );
@@ -1155,21 +1157,30 @@ static void udf_merge_extents(struct ino } } -static void udf_update_extents (struct inode *inode,struct kernel_long_ad *laarr, -int startnum,int endnum, -struct extent_position *epos) +static int udf_update_extents (struct inode *inode,struct kernel_long_ad *laarr, +int startnum,int endnum, +struct extent_position *epos) {int start =0 , i;struct kernel_lb_addr tmploc;uint32_t tmplen; +int err;if (startnum > endnum) {for (i =0 ; i < (startnum - endnum); i++)udf_delete_aext (inode, *epos); }else if (startnum < endnum) {for (i =0 ; i < (endnum - startnum); i++) { -udf_insert_aext (inode, *epos, laarr[i].extLocation, - laarr[i].extLength); + err =udf_insert_aext (inode, *epos, + laarr[i].extLocation, + laarr[i].extLength); +/* +* If we fail here, we are likely corrupting the extent +* list and leaking blocks. At least stop early to +* limit the damage. +*/ +if (err <0 ) +return err;udf_next_aext (inode, epos, &laarr[i].extLocation, &laarr[i].extLength,1 ); start++;
@@ -1181,6 +1192,7 @@ static void udf_update_extents(struct inudf_write_aext (inode, epos, &laarr[i].extLocation, laarr[i].extLength,1 ); } +return 0 ; } struct buffer_head *udf_bread(struct inode *inode, udf_pblk_t block,
@@ -2215,12 +2227,13 @@ int8_t udf_current_aext(struct inode *inreturn etype; } -static int8_t udf_insert_aext (struct inode *inode,struct extent_position epos, -struct kernel_lb_addr neloc,uint32_t nelen) +static int udf_insert_aext (struct inode *inode,struct extent_position epos, +struct kernel_lb_addr neloc,uint32_t nelen) {struct kernel_lb_addr oeloc;uint32_t oelen;int8_t etype; +int err;if (epos.bh)get_bh (epos.bh);
@@ -2230,10 +2243,10 @@ static int8_t udf_insert_aext(struct ino neloc = oeloc; nelen = (etype <<30 ) | oelen; } -udf_add_aext (inode, &epos, &neloc, nelen,1 ); + err =udf_add_aext (inode, &epos, &neloc, nelen,1 );brelse (epos.bh); -return (nelen >>30 ); +return err; }int8_t udf_delete_aext (struct inode *inode,struct extent_position epos)
Greg Kroah-Hartman
maintainerPATCH 64/406 Revert "net: macsec: preserve ingress frame ordering"
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sabrina Dubroca <[email protected]>
commit d3287e4038ca4f81e02067ab72d087af7224c68b upstream.
This reverts commit ab046a5d4be4c90a3952a0eae75617b49c0cb01b.
It was trying to work around an issue at the crypto layer by excluding ASYNC implementations of gcm(aes), because a bug in the AESNI version caused reordering when some requests bypassed the cryptd queue while older requests were still pending on the queue.
This was fixed by commit 38b2f68b4264 ("crypto: aesni - Fix cryptd reordering problem on gcm"), which pre-dates ab046a5d4be4.
Herbert Xu confirmed that all ASYNC implementations are expected to maintain the ordering of completions wrt requests, so we can use them in MACsec.
On my test machine, this restores the performance of a single netperf instance, from 1.4Gbps to 4.4Gbps.
--- drivers/net/macsec.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/net/macsec.c +1 -2
@@ -1347,8 +1347,7 @@ static struct crypto_aead *macsec_alloc_struct crypto_aead *tfm;int ret; -/* Pick a sync gcm(aes) cipher to ensure order is preserved. */ - tfm =crypto_alloc_aead ("gcm(aes)" ,0 ,CRYPTO_ALG_ASYNC ); + tfm =crypto_alloc_aead ("gcm(aes)" ,0 ,0 );if (IS_ERR (tfm))return tfm;
Greg Kroah-Hartman
maintainerPATCH 65/406 reiserfs: Check the return value from __getblk()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthew Wilcox <[email protected]>
[ Upstream commit ba38980add7ffc9e674ada5b4ded4e7d14e76581 ]
__getblk() can return a NULL pointer if we run out of memory or if we try to access beyond the end of the device; check it and handle it appropriately.
--- fs/reiserfs/journal.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
fs/reiserfs/journal.c +3 -1
@@ -2325,7 +2325,7 @@ static struct buffer_head *reiserfs_breada(struct block_device *dev,int i, j; bh =__getblk (dev, block, bufsize); -if (buffer_uptodate (bh)) +if (!bh ||buffer_uptodate (bh))return (bh);if (block +BUFNR > max_block) {
@@ -2335,6 +2335,8 @@ static struct buffer_head *reiserfs_breada(struct block_device *dev, j =1 ;for (i =1 ; i < blocks; i++) { bh =__getblk (dev, block + i, bufsize); +if (!bh) +break ;if (buffer_uptodate (bh)) {brelse (bh);break ;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 66/406 eventfd: Export eventfd_ctx_do_read()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Woodhouse <[email protected]>
[ Upstream commit 28f1326710555bbe666f64452d08f2d7dd657cae ]
Where events are consumed in the kernel, for example by KVM's irqfd_wakeup() and VFIO's virqfd_wakeup(), they currently lack a mechanism to drain the eventfd's counter.
Since the wait queue is already locked while the wakeup functions are invoked, all they really need to do is call eventfd_ctx_do_read().
Add a check for the lock, and export it for them.
Message-Id: <[email protected]>
Stable-dep-of: 758b49204781 ("eventfd: prevent underflow for eventfd semaphores")
--- fs/eventfd.c | 5 ++++- include/linux/eventfd.h | 6 ++++++ 2 files changed, 10 insertions(+), 1 deletion(-)
fs/eventfd.c +4 -1
@@ -187,11 +187,14 @@ static __poll_t eventfd_poll(struct file *file, poll_table *wait)return events; } -static void eventfd_ctx_do_read (struct eventfd_ctx *ctx,__u64 *cnt) +void eventfd_ctx_do_read (struct eventfd_ctx *ctx,__u64 *cnt) { +lockdep_assert_held (&ctx->wqh.lock); + *cnt = (ctx->flags &EFD_SEMAPHORE ) ?1 : ctx->count; ctx->count -= *cnt; } +EXPORT_SYMBOL_GPL (eventfd_ctx_do_read);/** * eventfd_ctx_remove_wait_queue - Read the current counter and removes wait queue.
include/linux/eventfd.h +6 -0
@@ -42,6 +42,7 @@ __u64 eventfd_signal(struct eventfd_ctx *ctx, __u64 n);__u64 eventfd_signal_mask (struct eventfd_ctx *ctx,__u64 n,unsigned mask);int eventfd_ctx_remove_wait_queue (struct eventfd_ctx *ctx,wait_queue_entry_t *wait,__u64 *cnt); +void eventfd_ctx_do_read (struct eventfd_ctx *ctx,__u64 *cnt);DECLARE_PER_CPU (int, eventfd_wake_count);
@@ -89,6 +90,11 @@ static inline bool eventfd_signal_count(void)return false; } +static inline void eventfd_ctx_do_read (struct eventfd_ctx *ctx,__u64 *cnt) +{ + +} +#endif #endif /* _LINUX_EVENTFD_H */
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 49/406 clk: fixed-mmio: make COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baoquan He <[email protected]>
[ Upstream commit e7dd44f4f3166db45248414f5df8f615392de47a ]
On s390 systems (aka mainframes), it has classic channel devices for networking and permanent storage that are currently even more common than PCI devices. Hence it could have a fully functional s390 kernel with CONFIG_PCI=n, then the relevant iomem mapping functions [including ioremap(), devm_ioremap(), etc.] are not available.
Here let COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM so that it won't be built to cause below compiling error if PCI is unset:
------
ld: drivers/clk/clk-fixed-mmio.o: in function `fixed_mmio_clk_setup':
clk-fixed-mmio.c:(.text+0x5e): undefined reference to `of_iomap'
ld: clk-fixed-mmio.c:(.text+0xba): undefined reference to `iounmap'
------
--- drivers/clk/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/clk/Kconfig +1 -0
@@ -356,6 +356,7 @@ config COMMON_CLK_BD718XX config COMMON_CLK_FIXED_MMIO bool "Clock driver for Memory Mapped Fixed values" depends on COMMON_CLK && OF + depends on HAS_IOMEM help Support for Memory Mapped IO Fixed clocks
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 67/406 eventfd: prevent underflow for eventfd semaphores
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wen Yang <[email protected]>
[ Upstream commit 758b492047816a3158d027e9fca660bc5bcf20bf ]
For eventfd with flag EFD_SEMAPHORE, when its ctx->count is 0, calling eventfd_ctx_do_read will cause ctx->count to overflow to ULLONG_MAX.
An underflow can happen with EFD_SEMAPHORE eventfds in at least the following three subsystems:
(1) virt/kvm/eventfd.c
(2) drivers/vfio/virqfd.c
(3) drivers/virt/acrn/irqfd.c
where (2) and (3) are just modeled after (1). An eventfd must be specified for use with the KVM_IRQFD ioctl(). This can also be an EFD_SEMAPHORE eventfd. When the eventfd count is zero or has been decremented to zero an underflow can be triggered when the irqfd is shut down by raising the KVM_IRQFD_FLAG_DEASSIGN flag in the KVM_IRQFD ioctl():
// ctx->count == 0
kvm_vm_ioctl()
-> kvm_irqfd()
-> kvm_irqfd_deassign()
-> irqfd_deactivate()
-> irqfd_shutdown()
-> eventfd_ctx_remove_wait_queue(&cnt)
-> eventfd_ctx_do_read(&cnt)Userspace polling on the eventfd wouldn't notice the underflow because 1 is always returned as the value from eventfd_read() while ctx->count would've underflowed. It's not a huge deal because this should only be happening when the irqfd is shutdown but we should still fix it and avoid the spurious wakeup.
Message-Id: <[email protected]>
--- fs/eventfd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/eventfd.c +1 -1
@@ -191,7 +191,7 @@ void eventfd_ctx_do_read(struct eventfd_ctx *ctx, __u64 *cnt) {lockdep_assert_held (&ctx->wqh.lock); - *cnt = (ctx->flags &EFD_SEMAPHORE ) ?1 : ctx->count; + *cnt = ((ctx->flags &EFD_SEMAPHORE ) && ctx->count) ?1 : ctx->count; ctx->count -= *cnt; }EXPORT_SYMBOL_GPL (eventfd_ctx_do_read);
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 68/406 fs: Fix error checking for d_hash_and_lookup()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wang Ming <[email protected]>
[ Upstream commit 0d5a4f8f775ff990142cdc810a84eae078589d27 ]
The d_hash_and_lookup() function returns error pointers or NULL. Most incorrect error checks were fixed, but the one in int path_pts() was forgotten.
Message-Id: <[email protected]>
--- fs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/namei.c +1 -1
@@ -2640,7 +2640,7 @@ int path_pts(struct path *path)dput (path->dentry); path->dentry = parent; child =d_hash_and_lookup (parent, &this); -if (!child) +if (IS_ERR_OR_NULL (child))return -ENOENT ; path->dentry = child;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 69/406 tmpfs: verify {g,u}id mount options correctly
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Brauner <[email protected]>
[ Upstream commit 0200679fc7953177941e41c2a4241d0b6c2c5de8 ]
A while ago we received the following report:
"The other outstanding issue I noticed comes from the fact that fsconfig syscalls may occur in a different userns than that which called fsopen. That means that resolving the uid/gid via current_user_ns() can save a kuid that isn't mapped in the associated namespace when the filesystem is finally mounted. This means that it is possible for an unprivileged user to create files owned by any group in a tmpfs mount (since we can set the SUID bit on the tmpfs directory), or a tmpfs that is owned by any user, including the root group/user."
The contract for {g,u}id mount options and {g,u}id values in general set from userspace has always been that they are translated according to the caller's idmapping. In so far, tmpfs has been doing the correct thing. But since tmpfs is mountable in unprivileged contexts it is also necessary to verify that the resulting {k,g}uid is representable in the namespace of the superblock to avoid such bugs as above.
The new mount api's cross-namespace delegation abilities are already widely used. After having talked to a bunch of userspace this is the most faithful solution with minimal regression risks. I know of one users - systemd - that makes use of the new mount api in this way and they don't set unresolable {g,u}ids. So the regression risk is minimal.
Message-Id: <[email protected]>
--- mm/shmem.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-)
mm/shmem.c +24 -4
@@ -3455,6 +3455,8 @@ static int shmem_parse_one(struct fs_context *fc, struct fs_parameter *param)unsigned long long size;char *rest;int opt; +kuid_t kuid; +kgid_t kgid; opt =fs_parse (fc, shmem_fs_parameters, param, &result);if (opt <0 )
@@ -3490,14 +3492,32 @@ static int shmem_parse_one(struct fs_context *fc, struct fs_parameter *param) ctx->mode = result.uint_32 &07777 ;break ;case Opt_uid: - ctx->uid =make_kuid (current_user_ns (), result.uint_32); -if (!uid_valid (ctx->uid)) + kuid =make_kuid (current_user_ns (), result.uint_32); +if (!uid_valid (kuid)) goto bad_value; + +/* +* The requested uid must be representable in the +* filesystem's idmapping. +*/ +if (!kuid_has_mapping (fc->user_ns, kuid)) + goto bad_value; + + ctx->uid = kuid;break ;case Opt_gid: - ctx->gid =make_kgid (current_user_ns (), result.uint_32); -if (!gid_valid (ctx->gid)) + kgid =make_kgid (current_user_ns (), result.uint_32); +if (!gid_valid (kgid)) goto bad_value; + +/* +* The requested gid must be representable in the +* filesystem's idmapping. +*/ +if (!kgid_has_mapping (fc->user_ns, kgid)) + goto bad_value; + + ctx->gid = kgid;break ;case Opt_huge: ctx->huge = result.uint_32;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 70/406 selftests/harness: Actually report SKIP for signal tests
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <[email protected]>
[ Upstream commit b3d46e11fec0c5a8972e5061bb1462119ae5736d ]
Tests that were expecting a signal were not correctly checking for a SKIP condition. Move the check before the signal checking when processing test result.
--- tools/testing/selftests/kselftest_harness.h | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
tools/testing/selftests/kselftest_harness.h +5 -6
@@ -910,7 +910,11 @@ void __wait_for_test(struct __test_metadata *t)fprintf (TH_LOG_STREAM ,"# %s: Test terminated by timeout\n" , t->name); }else if (WIFEXITED (status)) { -if (t->termsig !=-1 ) { +if (WEXITSTATUS (status) ==255 ) { +/* SKIP */ + t->passed =1 ; + t->skip =1 ; + }else if (t->termsig !=-1 ) { t->passed =0 ; fprintf(TH_LOG_STREAM, "# %s: Test exited normally instead of by signal (code: %d)\n",
@@ -922,11 +926,6 @@ void __wait_for_test(struct __test_metadata *t)case 0 : t->passed =1 ;break ; -/* SKIP */ -case 255 : - t->passed =1 ; - t->skip =1 ; -break ;/* Other failure, assume step report. */ default : t->passed =0 ;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 71/406 refscale: Fix uninitalized use of wait_queue_head_t
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Waiman Long <[email protected]>
[ Upstream commit f5063e8948dad7f31adb007284a5d5038ae31bb8 ]
Running the refscale test occasionally crashes the kernel with the following error:
[ 8569.952896] BUG: unable to handle page fault for address: ffffffffffffffe8 [ 8569.952900] #PF: supervisor read access in kernel mode [ 8569.952902] #PF: error_code(0x0000) - not-present page [ 8569.952904] PGD c4b048067 P4D c4b049067 PUD c4b04b067 PMD 0 [ 8569.952910] Oops: 0000 [#1] PREEMPT_RT SMP NOPTI [ 8569.952916] Hardware name: Dell Inc. PowerEdge R750/0WMWCR, BIOS 1.2.4 05/28/2021 [ 8569.952917] RIP: 0010:prepare_to_wait_event+0x101/0x190 : [ 8569.952940] Call Trace: [ 8569.952941] <TASK> [ 8569.952944] ref_scale_reader+0x380/0x4a0 [refscale] [ 8569.952959] kthread+0x10e/0x130 [ 8569.952966] ret_from_fork+0x1f/0x30 [ 8569.952973] </TASK>
The likely cause is that init_waitqueue_head() is called after the call to the torture_create_kthread() function that creates the ref_scale_reader kthread. Although this init_waitqueue_head() call will very likely complete before this kthread is created and starts running, it is possible that the calling kthread will be delayed between the calls to torture_create_kthread() and init_waitqueue_head(). In this case, the new kthread will use the waitqueue head before it is properly initialized, which is not good for the kernel's health and well-being.
The above crash happened here:
static inline void __add_wait_queue(...)
{
:
if (!(wq->flags & WQ_FLAG_PRIORITY)) <=== Crash hereThe offset of flags from list_head entry in wait_queue_entry is -0x18. If reader_tasks[i].wq.head.next is NULL as allocated reader_task structure is zero initialized, the instruction will try to access address 0xffffffffffffffe8, which is exactly the fault address listed above.
This commit therefore invokes init_waitqueue_head() before creating the kthread.
--- kernel/rcu/refscale.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
kernel/rcu/refscale.c +1 -2
@@ -692,12 +692,11 @@ ref_scale_init(void)VERBOSE_SCALEOUT ("Starting %d reader threads\n" , nreaders);for (i =0 ; i < nreaders; i++) { +init_waitqueue_head (&reader_tasks[i].wq); firsterr =torture_create_kthread (ref_scale_reader, (void *)i, reader_tasks[i].task);if (firsterr) goto unwind; - -init_waitqueue_head (&(reader_tasks[i].wq)); }// Main Task
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 72/406 OPP: Fix passing 0 to PTR_ERR in _opp_attach_genpd()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Manivannan Sadhasivam <[email protected]>
[ Upstream commit d920920f85a82c1c806a4143871a0e8f534732f2 ]
If dev_pm_domain_attach_by_name() returns NULL, then 0 will be passed to PTR_ERR() as reported by the smatch warning below:
drivers/opp/core.c:2456 _opp_attach_genpd() warn: passing zero to 'PTR_ERR'
Fix it by checking for the non-NULL virt_dev pointer before passing it to PTR_ERR. Otherwise return -ENODEV.
--- drivers/opp/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/opp/core.c +1 -1
@@ -2053,7 +2053,7 @@ struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, virt_dev =dev_pm_domain_attach_by_name (dev, *name);if (IS_ERR_OR_NULL (virt_dev)) { - ret =PTR_ERR (virt_dev) ? : -ENODEV ; + ret = virt_dev ?PTR_ERR (virt_dev) : -ENODEV ;dev_err (dev,"Couldn't attach to pm_domain: %d\n" , ret); goto err; }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 73/406 selftests/resctrl: Dont leak buffer in fill_cache()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilpo Järvinen <[email protected]>
[ Upstream commit 2d320b1029ee7329ee0638181be967789775b962 ]
The error path in fill_cache() does return before the allocated buffer is freed leaking the buffer.
The leak was introduced when fill_cache_read() started to return errors in commit c7b607fa9325 ("selftests/resctrl: Fix null pointer dereference on open failed"), before that both fill functions always returned 0.
Move free() earlier to prevent the mem leak.
--- tools/testing/selftests/resctrl/fill_buf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
tools/testing/selftests/resctrl/fill_buf.c +2 -1
@@ -184,12 +184,13 @@ fill_cache(unsigned long long buf_size, int malloc_and_init, int memflush,else ret =fill_cache_write (start_ptr, end_ptr, resctrl_val); +free (startptr); +if (ret) {printf ("\n Error in fill cache read/write...\n" );return -1 ; } -free (startptr);return 0 ; }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 74/406 selftests/resctrl: Unmount resctrl FS if child fails to run benchmark
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilpo Järvinen <[email protected]>
[ Upstream commit f99e413eb54652e2436cc56d081176bc9a34cd8d ]
A child calls PARENT_EXIT() when it fails to run a benchmark to kill the parent process. PARENT_EXIT() lacks unmount for the resctrl FS and the parent won't be there to unmount it either after it gets killed.
Add the resctrl FS unmount also to PARENT_EXIT().
--- tools/testing/selftests/resctrl/resctrl.h | 1 + 1 file changed, 1 insertion(+)
tools/testing/selftests/resctrl/resctrl.h +1 -0
@@ -33,6 +33,7 @@do { \perror (err_msg); \kill (ppid,SIGKILL ); \ +umount_resctrlfs (); \exit (EXIT_FAILURE ); \ }while (0 )
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 75/406 selftests/resctrl: Close perf value read fd on errors
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilpo Järvinen <[email protected]>
[ Upstream commit 51a0c3b7f028169e40db930575dd01fe81c3e765 ]
Perf event fd (fd_lm) is not closed when run_fill_buf() returns error.
Close fd_lm only in cat_val() to make it easier to track it is always closed.
--- tools/testing/selftests/resctrl/cache.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-)
tools/testing/selftests/resctrl/cache.c +11 -7
@@ -89,21 +89,19 @@ static int reset_enable_llc_perf(pid_t pid, int cpu_no)static int get_llc_perf (unsigned long *llc_perf_miss) {__u64 total_misses; +int ret;/* Stop counters after one span to get miss rate */ ioctl (fd_lm,PERF_EVENT_IOC_DISABLE ,0 ); -if (read (fd_lm, &rf_cqm,sizeof (struct read_format )) ==-1 ) { + ret =read (fd_lm, &rf_cqm,sizeof (struct read_format )); +if (ret ==-1 ) {perror ("Could not get llc misses through perf" ); -return -1 ; } total_misses = rf_cqm.values[0 ].value; - -close (fd_lm); - *llc_perf_miss = total_misses;return 0 ;
@@ -256,17 +254,23 @@ int cat_val(struct resctrl_val_param *param) memflush, operation, resctrl_val)) {fprintf (stderr,"Error-running fill buffer\n" ); ret =-1 ; -break ; + goto pe_close; }sleep (1 ); ret =measure_cache_vals (param, bm_pid);if (ret) -break ; + goto pe_close; + +close (fd_lm); }else {break ; } }return ret; + +pe_close: +close (fd_lm); +return ret; }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 50/406 vmbus_testing: fix wrong python syntax for integer value comparison
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ani Sinha <[email protected]>
[ Upstream commit ed0cf84e9cc42e6310961c87709621f1825c2bb8 ]
It is incorrect in python to compare integer values using the "is" keyword. The "is" keyword in python is used to compare references to two objects, not their values. Newer version of python3 (version 3.8) throws a warning when such incorrect comparison is made. For value comparison, "==" should be used.
Fix this in the code and suppress the following warning:
/usr/sbin/vmbus_testing:167: SyntaxWarning: "is" with a literal. Did you mean "=="?
--- tools/hv/vmbus_testing | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
tools/hv/vmbus_testing +2 -2
@@ -164,7 +164,7 @@ def recursive_file_lookup(path, file_map): def get_all_devices_test_status(file_map): for device in file_map: - if (get_test_state(locate_state(device, file_map)) is 1): + if (get_test_state(locate_state(device, file_map)) == 1): print("Testing = ON for: {}" .format(device.split("/")[5])) else:
@@ -203,7 +203,7 @@ def write_test_files(path, value): def set_test_state(state_path, state_value, quiet): write_test_files(state_path, state_value) - if (get_test_state(state_path) is 1): + if (get_test_state(state_path) == 1): if (not quiet): print("Testing = ON for device: {}" .format(state_path.split("/")[5]))
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 51/406 net: usb: qmi_wwan: add Quectel EM05GV2
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Kohn <[email protected]>
[ Upstream commit d4480c9bb9258db9ddf2e632f6ef81e96b41089c ]
Add support for Quectel EM05GV2 (G=global) with vendor ID 0x2c7c and product ID 0x030e
Enabling DTR on this modem was necessary to ensure stable operation. Patch for usb: serial: option: is also in progress.
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030e Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
--- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/usb/qmi_wwan.c +1 -0
@@ -1351,6 +1351,7 @@ static const struct usb_device_id products[] = { {QMI_QUIRK_SET_DTR(0x2c7c, 0x0191, 4)}, /* Quectel EG91 */ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0195, 4)}, /* Quectel EG95 */ {QMI_FIXED_INTF(0x2c7c, 0x0296, 4)}, /* Quectel BG96 */ + {QMI_QUIRK_SET_DTR(0x2c7c, 0x030e, 4)}, /* Quectel EM05GV2 */ {QMI_QUIRK_SET_DTR(0x2cb7, 0x0104, 4)}, /* Fibocom NL678 series */ {QMI_FIXED_INTF(0x0489, 0xe0b4, 0)}, /* Foxconn T77W968 LTE */ {QMI_FIXED_INTF(0x0489, 0xe0b5, 0)}, /* Foxconn T77W968 LTE with eSIM support*/
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 52/406 idmaengine: make FSL_EDMA and INTEL_IDMA64 depends on HAS_IOMEM
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baoquan He <[email protected]>
[ Upstream commit b1e213a9e31c20206f111ec664afcf31cbfe0dbb ]
On s390 systems (aka mainframes), it has classic channel devices for networking and permanent storage that are currently even more common than PCI devices. Hence it could have a fully functional s390 kernel with CONFIG_PCI=n, then the relevant iomem mapping functions [including ioremap(), devm_ioremap(), etc.] are not available.
Here let FSL_EDMA and INTEL_IDMA64 depend on HAS_IOMEM so that it won't be built to cause below compiling error if PCI is unset.
--------
ERROR: modpost: "devm_platform_ioremap_resource" [drivers/dma/fsl-edma.ko] undefined!
ERROR: modpost: "devm_platform_ioremap_resource" [drivers/dma/idma64.ko] undefined!
--------
--- drivers/dma/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
drivers/dma/Kconfig +2 -0
@@ -208,6 +208,7 @@ config FSL_DMA config FSL_EDMA tristate "Freescale eDMA engine support" depends on OF + depends on HAS_IOMEM select DMA_ENGINE select DMA_VIRTUAL_CHANNELS help
@@ -277,6 +278,7 @@ config IMX_SDMA config INTEL_IDMA64 tristate "Intel integrated DMA 64-bit support" + depends on HAS_IOMEM select DMA_ENGINE select DMA_VIRTUAL_CHANNELS help
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 53/406 scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chengfeng Ye <[email protected]>
[ Upstream commit dd64f80587190265ca8a0f4be6c64c2fda6d3ac2 ]
As &qedi_percpu->p_work_lock is acquired by hard IRQ qedi_msix_handler(), other acquisitions of the same lock under process context should disable IRQ, otherwise deadlock could happen if the IRQ preempts the execution while the lock is held in process context on the same CPU.
qedi_cpu_offline() is one such function which acquires the lock in process context.
[Deadlock Scenario]qedi_cpu_offline()
->spin_lock(&p->p_work_lock)
<irq>
->qedi_msix_handler()
->edi_process_completions()
->spin_lock_irqsave(&p->p_work_lock, flags); (deadlock here)This flaw was found by an experimental static analysis tool I am developing for IRQ-related deadlocks.
The tentative patch fix the potential deadlock by spin_lock_irqsave() under process context.
--- drivers/scsi/qedi/qedi_main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/scsi/qedi/qedi_main.c +3 -2
@@ -1981,8 +1981,9 @@ static int qedi_cpu_offline(unsigned int cpu)struct qedi_percpu_s *p =this_cpu_ptr (&qedi_percpu);struct qedi_work *work, *tmp;struct task_struct *thread; +unsigned long flags; -spin_lock_bh (&p->p_work_lock); +spin_lock_irqsave (&p->p_work_lock, flags); thread = p->iothread; p->iothread =NULL ;
@@ -1993,7 +1994,7 @@ static int qedi_cpu_offline(unsigned int cpu)kfree (work); } -spin_unlock_bh (&p->p_work_lock); +spin_unlock_irqrestore (&p->p_work_lock, flags);if (thread)kthread_stop (thread);return 0 ;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 54/406 netlabel: fix shift wrapping bug in netlbl_catmap_setlong()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Mastykin <[email protected]>
[ Upstream commit b403643d154d15176b060b82f7fc605210033edd ]
There is a shift wrapping bug in this code on 32-bit architectures. NETLBL_CATMAP_MAPTYPE is u64, bitmap is unsigned long. Every second 32-bit word of catmap becomes corrupted.
--- net/netlabel/netlabel_kapi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
net/netlabel/netlabel_kapi.c +2 -1
@@ -857,7 +857,8 @@ int netlbl_catmap_setlong(struct netlbl_lsm_catmap **catmap, offset -= iter->startbit; idx = offset /NETLBL_CATMAP_MAPSIZE ; - iter->bitmap[idx] |= bitmap << (offset %NETLBL_CATMAP_MAPSIZE ); + iter->bitmap[idx] |= (NETLBL_CATMAP_MAPTYPE )bitmap + << (offset %NETLBL_CATMAP_MAPSIZE );return 0 ; }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 55/406 bnx2x: fix page fault following EEH recovery
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Christensen <[email protected]>
[ Upstream commit 7ebe4eda4265642859507d1b3ca330d8c196cfe5 ]
In the last step of the EEH recovery process, the EEH driver calls into bnx2x_io_resume() to re-initialize the NIC hardware via the function bnx2x_nic_load(). If an error occurs during bnx2x_nic_load(), OS and hardware resources are released and an error code is returned to the caller. When called from bnx2x_io_resume(), the return code is ignored and the network interface is brought up unconditionally. Later attempts to send a packet via this interface result in a page fault due to a null pointer reference.
This patch checks the return code of bnx2x_nic_load(), prints an error message if necessary, and does not enable the interface.
--- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +7 -2
@@ -14372,11 +14372,16 @@ static void bnx2x_io_resume(struct pci_dev *pdev) bp->fw_seq =SHMEM_RD (bp, func_mb[BP_FW_MB_IDX (bp)].drv_mb_header) &DRV_MSG_SEQ_NUMBER_MASK ; -if (netif_running (dev)) -bnx2x_nic_load (bp,LOAD_NORMAL ); +if (netif_running (dev)) { +if (bnx2x_nic_load (bp,LOAD_NORMAL )) { +netdev_err (bp->dev,"Error during driver initialization, try unloading/reloading the driver\n" ); + goto done; + } + }netif_device_attach (dev); +done:rtnl_unlock (); }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 56/406 sctp: handle invalid error codes without calling BUG()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
[ Upstream commit a0067dfcd9418fd3b0632bc59210d120d038a9c6 ]
The sctp_sf_eat_auth() function is supposed to return enum sctp_disposition values but if the call to sctp_ulpevent_make_authkey() fails, it returns -ENOMEM.
This results in calling BUG() inside the sctp_side_effects() function. Calling BUG() is an over reaction and not helpful. Call WARN_ON_ONCE() instead.
This code predates git.
--- net/sctp/sm_sideeffect.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
net/sctp/sm_sideeffect.c +4 -1
@@ -1241,7 +1241,10 @@ static int sctp_side_effects(enum sctp_event_type event_type,default :pr_err ("impossible disposition %d in state %d, event_type %d, event_id %d\n" , status, state, event_type, subtype.chunk); -BUG (); + error = status; +if (error >=0 ) + error = -EINVAL ; +WARN_ON_ONCE (1 );break ; }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 47/406 security: keys: perform capable check only on privileged operations
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Göttsche <[email protected]>
[ Upstream commit 2d7f105edbb3b2be5ffa4d833abbf9b6965e9ce7 ]
If the current task fails the check for the queried capability via capable(CAP_SYS_ADMIN) LSMs like SELinux generate a denial message. Issuing such denial messages unnecessarily can lead to a policy author granting more privileges to a subject than needed to silence them.
Reorder CAP_SYS_ADMIN checks after the check whether the operation is actually privileged.
--- security/keys/keyctl.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
security/keys/keyctl.c +8 -3
@@ -980,14 +980,19 @@ long keyctl_chown_key(key_serial_t id, uid_t user, gid_t group) ret = -EACCES ;down_write (&key->sem); -if (!capable (CAP_SYS_ADMIN )) { + { +bool is_privileged_op = false; +/* only the sysadmin can chown a key to some other UID */ if (user != (uid_t) -1 && !uid_eq (key->uid, uid)) - goto error_put; + is_privileged_op = true;/* only the sysadmin can set the key's GID to a group other * than one of those that the current process subscribes to */ if (group != (gid_t) -1 && !gid_eq (gid, key->gid) && !in_group_p (gid)) + is_privileged_op = true; + +if (is_privileged_op && !capable (CAP_SYS_ADMIN )) goto error_put; }
@@ -1088,7 +1093,7 @@ long keyctl_setperm_key(key_serial_t id, key_perm_t perm)down_write (&key->sem);/* if we're not the sysadmin, we can only change a key that we own */ -if (capable (CAP_SYS_ADMIN ) ||uid_eq (key->uid,current_fsuid ())) { +if (uid_eq (key->uid,current_fsuid ()) ||capable (CAP_SYS_ADMIN )) { key->perm = perm;notify_key (key,NOTIFY_KEY_SETATTR ,0 ); ret =0 ;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 77/406 perf/imx_ddr: dont enable counter0 if none of 4 counters are used
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xu Yang <[email protected]>
[ Upstream commit f4e2bd91ddf5e8543cbe7ad80b3fba3d2dc63fa3 ]
In current driver, counter0 will be enabled after ddr_perf_pmu_enable() is called even though none of the 4 counters are used. This will cause counter0 continue to count until ddr_perf_pmu_disabled() is called. If pmu is not disabled all the time, the pmu interrupt will be asserted from time to time due to counter0 will overflow and irq handler will clear it. It's not an expected behavior. This patch will not enable counter0 if none of 4 counters are used.
--- drivers/perf/fsl_imx8_ddr_perf.c | 24 +++++++++--------------- 1 file changed, 9 insertions(+), 15 deletions(-)
drivers/perf/fsl_imx8_ddr_perf.c +9 -15
@@ -82,6 +82,7 @@ struct ddr_pmu {const struct fsl_ddr_devtype_data *devtype_data;int irq;int id; +int active_counter; };enum ddr_perf_filter_capabilities {
@@ -414,6 +415,10 @@ static void ddr_perf_event_start(struct perf_event *event, int flags)ddr_perf_counter_enable (pmu, event->attr.config, counter, true); +if (!pmu->active_counter++) +ddr_perf_counter_enable (pmu,EVENT_CYCLES_ID , +EVENT_CYCLES_COUNTER , true); + hwc->state =0 ; }
@@ -468,6 +473,10 @@ static void ddr_perf_event_stop(struct perf_event *event, int flags)ddr_perf_counter_enable (pmu, event->attr.config, counter, false);ddr_perf_event_update (event); +if (!--pmu->active_counter) +ddr_perf_counter_enable (pmu,EVENT_CYCLES_ID , +EVENT_CYCLES_COUNTER , false); + hwc->state |=PERF_HES_STOPPED ; }
@@ -486,25 +495,10 @@ static void ddr_perf_event_del(struct perf_event *event, int flags)static void ddr_perf_pmu_enable (struct pmu *pmu) { -struct ddr_pmu *ddr_pmu =to_ddr_pmu (pmu); - -/* enable cycle counter if cycle is not active event list */ -if (ddr_pmu->events[EVENT_CYCLES_COUNTER ] ==NULL ) -ddr_perf_counter_enable (ddr_pmu, -EVENT_CYCLES_ID , -EVENT_CYCLES_COUNTER , - true); }static void ddr_perf_pmu_disable (struct pmu *pmu) { -struct ddr_pmu *ddr_pmu =to_ddr_pmu (pmu); - -if (ddr_pmu->events[EVENT_CYCLES_COUNTER ] ==NULL ) -ddr_perf_counter_enable (ddr_pmu, -EVENT_CYCLES_ID , -EVENT_CYCLES_COUNTER , - false); } static int ddr_perf_init(struct ddr_pmu *pmu, void __iomem *base,
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 86/406 regmap: rbtree: Use alloc_flags for memory allocations
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
[ Upstream commit 0c8b0bf42c8cef56f7cd9cd876fbb7ece9217064 ]
The kunit tests discovered a sleeping in atomic bug. The allocations in the regcache-rbtree code should use the map->alloc_flags instead of GFP_KERNEL.
[ 5.005510] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306
[ 5.005960] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 117, name: kunit_try_catch
[ 5.006219] preempt_count: 1, expected: 0
[ 5.006414] 1 lock held by kunit_try_catch/117:
[ 5.006590] #0: 833b9010 (regmap_kunit:86:(config)->lock){....}-{2:2}, at: regmap_lock_spinlock+0x14/0x1c
[ 5.007493] irq event stamp: 162
[ 5.007627] hardirqs last enabled at (161): [<80786738>] crng_make_state+0x1a0/0x294
[ 5.007871] hardirqs last disabled at (162): [<80c531ec>] _raw_spin_lock_irqsave+0x7c/0x80
[ 5.008119] softirqs last enabled at (0): [<801110ac>] copy_process+0x810/0x2138
[ 5.008356] softirqs last disabled at (0): [<00000000>] 0x0
[ 5.008688] CPU: 0 PID: 117 Comm: kunit_try_catch Tainted: G N 6.4.4-rc3-g0e8d2fdfb188 #1
[ 5.009011] Hardware name: Generic DT based system
[ 5.009277] unwind_backtrace from show_stack+0x18/0x1c
[ 5.009497] show_stack from dump_stack_lvl+0x38/0x5c
[ 5.009676] dump_stack_lvl from __might_resched+0x188/0x2d0
[ 5.009860] __might_resched from __kmem_cache_alloc_node+0x1dc/0x25c
[ 5.010061] __kmem_cache_alloc_node from kmalloc_trace+0x30/0xc8
[ 5.010254] kmalloc_trace from regcache_rbtree_write+0x26c/0x468
[ 5.010446] regcache_rbtree_write from _regmap_write+0x88/0x140
[ 5.010634] _regmap_write from regmap_write+0x44/0x68
[ 5.010803] regmap_write from basic_read_write+0x8c/0x270
[ 5.010980] basic_read_write from kunit_try_run_case+0x48/0xa0--- drivers/base/regmap/regcache-rbtree.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/base/regmap/regcache-rbtree.c +5 -5
@@ -277,7 +277,7 @@ static int regcache_rbtree_insert_to_block(struct regmap *map, blk =krealloc (rbnode->block, blklen * map->cache_word_size, -GFP_KERNEL ); + map->alloc_flags);if (!blk)return -ENOMEM ;
@@ -286,7 +286,7 @@ static int regcache_rbtree_insert_to_block(struct regmap *map,if (BITS_TO_LONGS (blklen) >BITS_TO_LONGS (rbnode->blklen)) { present =krealloc (rbnode->cache_present,BITS_TO_LONGS (blklen) *sizeof (*present), -GFP_KERNEL ); + map->alloc_flags);if (!present)return -ENOMEM ;
@@ -320,7 +320,7 @@ regcache_rbtree_node_alloc(struct regmap *map, unsigned int reg)const struct regmap_range *range;int i; - rbnode =kzalloc (sizeof (*rbnode),GFP_KERNEL ); + rbnode =kzalloc (sizeof (*rbnode), map->alloc_flags);if (!rbnode)return NULL ;
@@ -346,13 +346,13 @@ regcache_rbtree_node_alloc(struct regmap *map, unsigned int reg) } rbnode->block =kmalloc_array (rbnode->blklen, map->cache_word_size, -GFP_KERNEL ); + map->alloc_flags);if (!rbnode->block) goto err_free; rbnode->cache_present =kcalloc (BITS_TO_LONGS (rbnode->blklen),sizeof (*rbnode->cache_present), -GFP_KERNEL ); + map->alloc_flags);if (!rbnode->cache_present) goto err_free_block;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 87/406 udp: re-score reuseport groups when connected sockets are present
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lorenz Bauer <[email protected]>
[ Upstream commit f0ea27e7bfe1c34e1f451a63eb68faa1d4c3a86d ]
Contrary to TCP, UDP reuseport groups can contain TCP_ESTABLISHED sockets. To support these properly we remember whether a group has a connected socket and skip the fast reuseport early-return. In effect we continue scoring all reuseport sockets and then choose the one with the highest score.
The current code fails to re-calculate the score for the result of lookup_reuseport. According to Kuniyuki Iwashima:
1) SO_INCOMING_CPU is set
-> selected sk might have +1 score
2) BPF prog returns ESTABLISHED and/or SO_INCOMING_CPU sk -> selected sk will have more than 8
Using the old score could trigger more lookups depending on the order that sockets are created.
sk -> sk (SO_INCOMING_CPU) -> sk (ESTABLISHED)
| |
`-> select the next SO_INCOMING_CPU sk
|
`-> select itself (We should save this lookup)--- net/ipv4/udp.c | 20 +++++++++++++++----- net/ipv6/udp.c | 19 ++++++++++++++----- 2 files changed, 29 insertions(+), 10 deletions(-)
net/ipv4/udp.c +15 -5
@@ -443,14 +443,24 @@ static struct sock *udp4_lib_lookup2(struct net *net, score =compute_score (sk, net, saddr, sport, daddr, hnum, dif, sdif);if (score > badness) { - result =lookup_reuseport (net, sk, skb, - saddr, sport, daddr, hnum); + badness = score; + result =lookup_reuseport (net, sk, skb, saddr, sport, daddr, hnum); +if (!result) { + result = sk; +continue ; + } +/* Fall back to scoring if group has connections */ -if (result && !reuseport_has_conns (sk)) +if (!reuseport_has_conns (sk))return result; - result = result ? : sk; - badness = score; +/* Reuseport logic returned an error, keep original score. */ +if (IS_ERR (result)) +continue ; + + badness =compute_score (result, net, saddr, sport, + daddr, hnum, dif, sdif); + } }return result;
net/ipv6/udp.c +14 -5
@@ -189,14 +189,23 @@ static struct sock *udp6_lib_lookup2(struct net *net, score =compute_score (sk, net, saddr, sport, daddr, hnum, dif, sdif);if (score > badness) { - result =lookup_reuseport (net, sk, skb, - saddr, sport, daddr, hnum); + badness = score; + result =lookup_reuseport (net, sk, skb, saddr, sport, daddr, hnum); +if (!result) { + result = sk; +continue ; + } +/* Fall back to scoring if group has connections */ -if (result && !reuseport_has_conns (sk)) +if (!reuseport_has_conns (sk))return result; - result = result ? : sk; - badness = score; +/* Reuseport logic returned an error, keep original score. */ +if (IS_ERR (result)) +continue ; + + badness =compute_score (sk, net, saddr, sport, + daddr, hnum, dif, sdif); } }return result;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 88/406 bpf: reject unhashed sockets in bpf_sk_assign
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lorenz Bauer <[email protected]>
[ Upstream commit 67312adc96b5a585970d03b62412847afe2c6b01 ]
The semantics for bpf_sk_assign are as follows:
sk = some_lookup_func()
bpf_sk_assign(skb, sk)
bpf_sk_release(sk)
That is, the sk is not consumed by bpf_sk_assign. The function therefore needs to make sure that sk lives long enough to be consumed from __inet_lookup_skb. The path through the stack for a TCPv4 packet is roughly:
netif_receive_skb_core: takes RCU read lock
__netif_receive_skb_core:
sch_handle_ingress:
tcf_classify:
bpf_sk_assign()
deliver_ptype_list_skb:
deliver_skb:
ip_packet_type->func == ip_rcv:
ip_rcv_core:
ip_rcv_finish_core:
dst_input:
ip_local_deliver:
ip_local_deliver_finish:
ip_protocol_deliver_rcu:
tcp_v4_rcv:
__inet_lookup_skb:
skb_steal_sockThe existing helper takes advantage of the fact that everything happens in the same RCU critical section: for sockets with SOCK_RCU_FREE set bpf_sk_assign never takes a reference. skb_steal_sock then checks SOCK_RCU_FREE again and does sock_put if necessary.
This approach assumes that SOCK_RCU_FREE is never set on a sk between bpf_sk_assign and skb_steal_sock, but this invariant is violated by unhashed UDP sockets. A new UDP socket is created in TCP_CLOSE state but without SOCK_RCU_FREE set. That flag is only added in udp_lib_get_port() which happens when a socket is bound.
When bpf_sk_assign was added it wasn't possible to access unhashed UDP sockets from BPF, so this wasn't a problem. This changed in commit 0c48eefae712 ("sock_map: Lift socket state restriction for datagram sockets"), but the helper wasn't adjusted accordingly. The following sequence of events will therefore lead to a refcount leak:
1. Add socket(AF_INET, SOCK_DGRAM) to a sockmap.
2. Pull socket out of sockmap and bpf_sk_assign it. Since SOCK_RCU_FREE is not set we increment the refcount.
3. bind() or connect() the socket, setting SOCK_RCU_FREE.
4. skb_steal_sock will now set refcounted = false due to SOCK_RCU_FREE.
5. tcp_v4_rcv() skips sock_put().
Fix the problem by rejecting unhashed sockets in bpf_sk_assign(). This matches the behaviour of __inet_lookup_skb which is ultimately the goal of bpf_sk_assign().
--- net/core/filter.c | 2 ++ 1 file changed, 2 insertions(+)
net/core/filter.c +2 -0
@@ -6661,6 +6661,8 @@ BPF_CALL_3(bpf_sk_assign, struct sk_buff *, skb, struct sock *, sk, u64, flags)return -ENETUNREACH ;if (unlikely (sk_fullsock (sk) && sk->sk_reuseport))return -ESOCKTNOSUPPORT ; +if (sk_unhashed (sk)) +return -EOPNOTSUPP ;if (sk_is_refcounted (sk) &&unlikely (!refcount_inc_not_zero (&sk->sk_refcnt)))return -ENOENT ;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 89/406 wifi: mt76: testmode: add nla_policy for MT76_TM_ATTR_TX_LENGTH
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lin Ma <[email protected]>
[ Upstream commit 74f12d511625e603fac8c0c2b6872e687e56dd61 ]
It seems that the nla_policy in mt76_tm_policy is missed for attribute MT76_TM_ATTR_TX_LENGTH. This patch adds the correct description to make sure the
u32 val = nla_get_u32(tb[MT76_TM_ATTR_TX_LENGTH]);
in function mt76_testmode_cmd() is safe and will not result in out-of-attribute read.
--- drivers/net/wireless/mediatek/mt76/testmode.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/wireless/mediatek/mt76/testmode.c +1 -0
@@ -6,6 +6,7 @@ static const struct nla_policy mt76_tm_policy[NUM_MT76_TM_ATTRS] = { [MT76_TM_ATTR_RESET] = { .type = NLA_FLAG }, [MT76_TM_ATTR_STATE] = { .type = NLA_U8 }, [MT76_TM_ATTR_TX_COUNT] = { .type = NLA_U32 }, + [MT76_TM_ATTR_TX_LENGTH] = { .type = NLA_U32 }, [MT76_TM_ATTR_TX_RATE_MODE] = { .type = NLA_U8 }, [MT76_TM_ATTR_TX_RATE_NSS] = { .type = NLA_U8 }, [MT76_TM_ATTR_TX_RATE_IDX] = { .type = NLA_U8 },
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 90/406 spi: tegra20-sflash: fix to check return value of platform_get_irq() in tegra_sflash_probe()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhang Shurong <[email protected]>
[ Upstream commit 29a449e765ff70a5bd533be94babb6d36985d096 ]
The platform_get_irq might be failed and return a negative result. So there should have an error handling code.
Fixed this by adding an error handling code.
--- drivers/spi/spi-tegra20-sflash.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/spi/spi-tegra20-sflash.c +5 -1
@@ -456,7 +456,11 @@ static int tegra_sflash_probe(struct platform_device *pdev) goto exit_free_master; } - tsd->irq =platform_get_irq (pdev,0 ); + ret =platform_get_irq (pdev,0 ); +if (ret <0 ) + goto exit_free_master; + tsd->irq = ret; + ret =request_irq (tsd->irq, tegra_sflash_isr,0 ,dev_name (&pdev->dev), tsd);if (ret <0 ) {
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 91/406 can: gs_usb: gs_usb_receive_bulk_callback(): count RX overflow errors also in case of OOM
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Kleine-Budde <[email protected]>
[ Upstream commit 6c8bc15f02b85bc8f47074110d8fd8caf7a1e42d ]
In case of an RX overflow error from the CAN controller and an OOM where no skb can be allocated, the error counters are not incremented.
Fix this by first incrementing the error counters and then allocate the skb.
--- drivers/net/can/usb/gs_usb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/net/can/usb/gs_usb.c +3 -2
@@ -381,6 +381,9 @@ static void gs_usb_receive_bulk_callback(struct urb *urb) }if (hf->flags &GS_CAN_FLAG_OVERFLOW ) { + stats->rx_over_errors++; + stats->rx_errors++; + skb =alloc_can_err_skb (netdev, &cf);if (!skb) goto resubmit_urb;
@@ -388,8 +391,6 @@ static void gs_usb_receive_bulk_callback(struct urb *urb) cf->can_id |=CAN_ERR_CRTL ; cf->can_dlc =CAN_ERR_DLC ; cf->data[1 ] =CAN_ERR_CRTL_RX_OVERFLOW ; - stats->rx_over_errors++; - stats->rx_errors++;netif_rx (skb); }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 92/406 wifi: mwifiex: Fix OOB and integer underflow when rx packets
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Polaris Pi <[email protected]>
[ Upstream commit 11958528161731c58e105b501ed60b83a91ea941 ]
Make sure mwifiex_process_mgmt_packet, mwifiex_process_sta_rx_packet and mwifiex_process_uap_rx_packet, mwifiex_uap_queue_bridged_pkt and mwifiex_process_rx_packet not out-of-bounds access the skb->data buffer.
--- drivers/net/wireless/marvell/mwifiex/sta_rx.c | 11 ++++++++++- .../net/wireless/marvell/mwifiex/uap_txrx.c | 19 +++++++++++++++++++ drivers/net/wireless/marvell/mwifiex/util.c | 10 +++++++--- 3 files changed, 36 insertions(+), 4 deletions(-)
drivers/net/wireless/marvell/mwifiex/sta_rx.c +10 -1
@@ -98,6 +98,14 @@ int mwifiex_process_rx_packet(struct mwifiex_private *priv, rx_pkt_len =le16_to_cpu (local_rx_pd->rx_pkt_length); rx_pkt_hdr = (void *)local_rx_pd + rx_pkt_off; +if (sizeof (*rx_pkt_hdr) + rx_pkt_off > skb->len) { +mwifiex_dbg (priv->adapter,ERROR , +"wrong rx packet offset: len=%d, rx_pkt_off=%d\n" , + skb->len, rx_pkt_off); + priv->stats.rx_dropped++; +dev_kfree_skb_any (skb); + } + if ((!memcmp(&rx_pkt_hdr->rfc1042_hdr, bridge_tunnel_header, sizeof(bridge_tunnel_header))) || (!memcmp(&rx_pkt_hdr->rfc1042_hdr, rfc1042_header,
@@ -206,7 +214,8 @@ int mwifiex_process_sta_rx_packet(struct mwifiex_private *priv, rx_pkt_hdr = (void *)local_rx_pd + rx_pkt_offset; -if ((rx_pkt_offset + rx_pkt_length) > (u16 ) skb->len) { +if ((rx_pkt_offset + rx_pkt_length) > skb->len || +sizeof (rx_pkt_hdr->eth803_hdr) + rx_pkt_offset > skb->len) {mwifiex_dbg (adapter,ERROR ,"wrong rx packet: len=%d, rx_pkt_offset=%d, rx_pkt_length=%d\n" , skb->len, rx_pkt_offset, rx_pkt_length);
drivers/net/wireless/marvell/mwifiex/uap_txrx.c +19 -0
@@ -115,6 +115,15 @@ static void mwifiex_uap_queue_bridged_pkt(struct mwifiex_private *priv,return ; } +if (sizeof (*rx_pkt_hdr) + +le16_to_cpu (uap_rx_pd->rx_pkt_offset) > skb->len) { +mwifiex_dbg (adapter,ERROR , +"wrong rx packet offset: len=%d,rx_pkt_offset=%d\n" , + skb->len,le16_to_cpu (uap_rx_pd->rx_pkt_offset)); + priv->stats.rx_dropped++; +dev_kfree_skb_any (skb); + } + if ((!memcmp(&rx_pkt_hdr->rfc1042_hdr, bridge_tunnel_header, sizeof(bridge_tunnel_header))) || (!memcmp(&rx_pkt_hdr->rfc1042_hdr, rfc1042_header,
@@ -379,6 +388,16 @@ int mwifiex_process_uap_rx_packet(struct mwifiex_private *priv, rx_pkt_type =le16_to_cpu (uap_rx_pd->rx_pkt_type); rx_pkt_hdr = (void *)uap_rx_pd +le16_to_cpu (uap_rx_pd->rx_pkt_offset); +if (le16_to_cpu (uap_rx_pd->rx_pkt_offset) + +sizeof (rx_pkt_hdr->eth803_hdr) > skb->len) { +mwifiex_dbg (adapter,ERROR , +"wrong rx packet for struct ethhdr: len=%d, offset=%d\n" , + skb->len,le16_to_cpu (uap_rx_pd->rx_pkt_offset)); + priv->stats.rx_dropped++; +dev_kfree_skb_any (skb); +return 0 ; + } +ether_addr_copy (ta, rx_pkt_hdr->eth803_hdr.h_source); if ((le16_to_cpu(uap_rx_pd->rx_pkt_offset) +
drivers/net/wireless/marvell/mwifiex/util.c +7 -3
@@ -405,11 +405,15 @@ mwifiex_process_mgmt_packet(struct mwifiex_private *priv, } rx_pd = (struct rxpd *)skb->data; + pkt_len =le16_to_cpu (rx_pd->rx_pkt_length); +if (pkt_len <sizeof (struct ieee80211_hdr ) +sizeof (pkt_len)) { +mwifiex_dbg (priv->adapter,ERROR ,"invalid rx_pkt_length" ); +return -1 ; + }skb_pull (skb,le16_to_cpu (rx_pd->rx_pkt_offset));skb_pull (skb,sizeof (pkt_len)); - - pkt_len =le16_to_cpu (rx_pd->rx_pkt_length); + pkt_len -=sizeof (pkt_len); ieee_hdr = (void *)skb->data;if (ieee80211_is_mgmt (ieee_hdr->frame_control)) {
@@ -422,7 +426,7 @@ mwifiex_process_mgmt_packet(struct mwifiex_private *priv, skb->data +sizeof (struct ieee80211_hdr ), pkt_len - sizeof(struct ieee80211_hdr)); - pkt_len -=ETH_ALEN +sizeof (pkt_len); + pkt_len -=ETH_ALEN ; rx_pd->rx_pkt_length =cpu_to_le16 (pkt_len); cfg80211_rx_mgmt(&priv->wdev, priv->roc_cfg.chan.center_freq,
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 93/406 wifi: mwifiex: fix error recovery in PCIE buffer descriptor management
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Antipov <[email protected]>
[ Upstream commit 288c63d5cb4667a51a04668b3e2bb0ea499bc5f4 ]
Add missing 'kfree_skb()' in 'mwifiex_init_rxq_ring()' and never do 'kfree(card->rxbd_ring_vbase)' because this area is DMAed and should be released with 'dma_free_coherent()'. The latter is performed in 'mwifiex_pcie_delete_rxbd_ring()', which is now called to recover from possible errors in 'mwifiex_pcie_create_rxbd_ring()'. Likewise for 'mwifiex_pcie_init_evt_ring()', 'kfree(card->evtbd_ring_vbase)' 'mwifiex_pcie_delete_evtbd_ring()' and 'mwifiex_pcie_create_rxbd_ring()'.
--- drivers/net/wireless/marvell/mwifiex/pcie.c | 25 ++++++++++++++------- 1 file changed, 17 insertions(+), 8 deletions(-)
drivers/net/wireless/marvell/mwifiex/pcie.c +17 -8
@@ -200,6 +200,8 @@ static int mwifiex_pcie_probe_of(struct device *dev) }static void mwifiex_pcie_work (struct work_struct *work); +static int mwifiex_pcie_delete_rxbd_ring (struct mwifiex_adapter *adapter); +static int mwifiex_pcie_delete_evtbd_ring (struct mwifiex_adapter *adapter); static int mwifiex_map_pci_memory(struct mwifiex_adapter *adapter, struct sk_buff *skb,
@@ -794,14 +796,15 @@ static int mwifiex_init_rxq_ring(struct mwifiex_adapter *adapter)if (!skb) {mwifiex_dbg (adapter,ERROR ,"Unable to allocate skb for RX ring.\n" ); -kfree (card->rxbd_ring_vbase);return -ENOMEM ; }if (mwifiex_map_pci_memory (adapter, skb,MWIFIEX_RX_DATA_BUF_SIZE , -DMA_FROM_DEVICE )) -return -1 ; +DMA_FROM_DEVICE )) { +kfree_skb (skb); +return -ENOMEM ; + } buf_pa =MWIFIEX_SKB_DMA_ADDR (skb);
@@ -851,7 +854,6 @@ static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter)if (!skb) {mwifiex_dbg (adapter,ERROR ,"Unable to allocate skb for EVENT buf.\n" ); -kfree (card->evtbd_ring_vbase);return -ENOMEM ; }skb_put (skb,MAX_EVENT_SIZE );
@@ -859,8 +861,7 @@ static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter)if (mwifiex_map_pci_memory (adapter, skb,MAX_EVENT_SIZE ,DMA_FROM_DEVICE )) {kfree_skb (skb); -kfree (card->evtbd_ring_vbase); -return -1 ; +return -ENOMEM ; } buf_pa =MWIFIEX_SKB_DMA_ADDR (skb);
@@ -1060,6 +1061,7 @@ static int mwifiex_pcie_delete_txbd_ring(struct mwifiex_adapter *adapter)*/ static int mwifiex_pcie_create_rxbd_ring (struct mwifiex_adapter *adapter) { +int ret;struct pcie_service_card *card = adapter->card;const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
@@ -1098,7 +1100,10 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) (u32)((u64 )card->rxbd_ring_pbase >>32 ), card->rxbd_ring_size); -return mwifiex_init_rxq_ring (adapter); + ret =mwifiex_init_rxq_ring (adapter); +if (ret) +mwifiex_pcie_delete_rxbd_ring (adapter); +return ret; }/*
@@ -1129,6 +1134,7 @@ static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter)*/ static int mwifiex_pcie_create_evtbd_ring (struct mwifiex_adapter *adapter) { +int ret;struct pcie_service_card *card = adapter->card;const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
@@ -1163,7 +1169,10 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) (u32)((u64 )card->evtbd_ring_pbase >>32 ), card->evtbd_ring_size); -return mwifiex_pcie_init_evt_ring (adapter); + ret =mwifiex_pcie_init_evt_ring (adapter); +if (ret) +mwifiex_pcie_delete_evtbd_ring (adapter); +return ret; }/*
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 94/406 selftests/bpf: fix static assert compilation issue for test_cls_*.c
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Maguire <[email protected]>
[ Upstream commit 416c6d01244ecbf0abfdb898fd091b50ef951b48 ]
commit bdeeed3498c7 ("libbpf: fix offsetof() and container_of() to work with CO-RE")
...was backported to stable trees such as 5.15. The problem is that with older LLVM/clang (14/15) - which is often used for older kernels - we see compilation failures in BPF selftests now:
In file included from progs/test_cls_redirect_subprogs.c:2:progs/test_cls_redirect.c:90:2: error: static assertion expression is not an integral constant expression
sizeof(flow_ports_t) !=
^~~~~~~~~~~~~~~~~~~~~~~progs/test_cls_redirect.c:91:3: note: cast that performs the conversions of a reinterpret_cast is not allowed in a constant expression
offsetofend(struct bpf_sock_tuple, ipv4.dport) -
^progs/test_cls_redirect.c:32:3: note: expanded from macro 'offsetofend'
(offsetof(TYPE, MEMBER) + sizeof((((TYPE *)0)->MEMBER)))
^
tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:86:33: note: expanded from macro 'offsetof'
^
In file included from progs/test_cls_redirect_subprogs.c:2:
progs/test_cls_redirect.c:95:2: error: static assertion expression is not an integral constant expression
sizeof(flow_ports_t) !=
^~~~~~~~~~~~~~~~~~~~~~~progs/test_cls_redirect.c:96:3: note: cast that performs the conversions of a reinterpret_cast is not allowed in a constant expression
offsetofend(struct bpf_sock_tuple, ipv6.dport) -
^progs/test_cls_redirect.c:32:3: note: expanded from macro 'offsetofend'
(offsetof(TYPE, MEMBER) + sizeof((((TYPE *)0)->MEMBER)))
^
tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:86:33: note: expanded from macro 'offsetof'
^2 errors generated.
make: *** [Makefile:594: tools/testing/selftests/bpf/test_cls_redirect_subprogs.bpf.o] Error 1
The problem is the new offsetof() does not play nice with static asserts. Given that the context is a static assert (and CO-RE relocation is not needed at compile time), offsetof() usage can be replaced by restoring the original offsetof() definition as __builtin_offsetof().
--- tools/testing/selftests/bpf/progs/test_cls_redirect.h | 9 +++++++++ 1 file changed, 9 insertions(+)
tools/testing/selftests/bpf/progs/test_cls_redirect.h +9 -0
@@ -12,6 +12,15 @@#include <linux/ipv6.h> #include <linux/udp.h> +/* offsetof() is used in static asserts, and the libbpf-redefined CO-RE +* friendly version breaks compilation for older clang versions <= 15 +* when invoked in a static assert. Restore original here. +*/ +#ifdef offsetof +#undef offsetof +#define offsetof (type, member) __builtin_offsetof(type, member) +#endif +struct gre_base_hdr {uint16_t flags;uint16_t protocol;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 95/406 crypto: stm32 - Properly handle pm_runtime_get failing
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Uwe Kleine-König <[email protected]>
[ Upstream commit aec48805163338f8413118796c1dd035661b9140 ]
If pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, this means the clk wasn't prepared and enabled. Returning early in this case however is wrong as then the following resource frees are skipped and this is never catched up. So do all the cleanups but clk_disable_unprepare().
Also don't emit a warning, as stm32_hash_runtime_resume() already emitted one.
Note that the return value of stm32_hash_remove() is mostly ignored by the device core. The only effect of returning zero instead of an error value is to suppress another warning in platform_remove(). So return 0 even if pm_runtime_resume_and_get() failed.
--- drivers/crypto/stm32/stm32-hash.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/crypto/stm32/stm32-hash.c +3 -4
@@ -1565,9 +1565,7 @@ static int stm32_hash_remove(struct platform_device *pdev)if (!hdev)return -ENODEV ; - ret =pm_runtime_resume_and_get (hdev->dev); -if (ret <0 ) -return ret; + ret =pm_runtime_get_sync (hdev->dev);stm32_hash_unregister_algs (hdev);
@@ -1583,7 +1581,8 @@ static int stm32_hash_remove(struct platform_device *pdev)pm_runtime_disable (hdev->dev);pm_runtime_put_noidle (hdev->dev); -clk_disable_unprepare (hdev->clk); +if (ret >=0 ) +clk_disable_unprepare (hdev->clk);return 0 ; }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 78/406 s390/pkey: fix/harmonize internal keyblob headers
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Holger Dengler <[email protected]>
[ Upstream commit 37a08f010b7c423b5e4c9ed3b187d21166553007 ]
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced PKEY_TYPE_EP11_AES as a supplement to PKEY_TYPE_EP11. All pkeys have an internal header/payload structure, which is opaque to the userspace. The header structures for PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES are nearly identical and there is no reason, why different structures are used. In preparation to fix the keyversion handling in the broken PKEY IOCTLs, the same header structure is used for PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES. This reduces the number of different code paths and increases the readability.
--- drivers/s390/crypto/pkey_api.c | 2 +- drivers/s390/crypto/zcrypt_ep11misc.c | 4 ++-- drivers/s390/crypto/zcrypt_ep11misc.h | 9 +-------- 3 files changed, 4 insertions(+), 11 deletions(-)
drivers/s390/crypto/pkey_api.c +1 -1
@@ -735,7 +735,7 @@ static int pkey_verifykey2(const u8 *key, size_t keylen,if (ktype) *ktype =PKEY_TYPE_EP11 ;if (ksize) - *ksize = kb->head.keybitlen; + *ksize = kb->head.bitlen; rc =ep11_findcard2 (&_apqns, &_nr_apqns, *cardnr, *domain,ZCRYPT_CEX7 ,EP11_API_V , kb->wkvp);
drivers/s390/crypto/zcrypt_ep11misc.c +2 -2
@@ -788,7 +788,7 @@ int ep11_genaeskey(u16 card, u16 domain, u32 keybitsize, u32 keygenflags, kb->head.type =TOKTYPE_NON_CCA ; kb->head.len = rep_pl->data_len; kb->head.version =TOKVER_EP11_AES ; - kb->head.keybitlen = keybitsize; + kb->head.bitlen = keybitsize; out:kfree (req);
@@ -1056,7 +1056,7 @@ static int ep11_unwrapkey(u16 card, u16 domain, kb->head.type =TOKTYPE_NON_CCA ; kb->head.len = rep_pl->data_len; kb->head.version =TOKVER_EP11_AES ; - kb->head.keybitlen = keybitsize; + kb->head.bitlen = keybitsize; out:kfree (req);
drivers/s390/crypto/zcrypt_ep11misc.h +1 -8
@@ -29,14 +29,7 @@ struct ep11keyblob {union {u8 session[32 ];/* only used for PKEY_TYPE_EP11: */ -struct { -u8 type;/* 0x00 (TOKTYPE_NON_CCA) */ -u8 res0;/* unused */ -u16 len;/* total length in bytes of this blob */ -u8 version;/* 0x03 (TOKVER_EP11_AES) */ -u8 res1;/* unused */ -u16 keybitlen;/* clear key bit len, 0 for unknown */ - } head; +struct ep11kblob_header head; };u8 wkvp[16 ];/* wrapping key verification pattern */ u64 attr;/* boolean key attributes */
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 96/406 crypto: blake2b - sync with blake2s implementation
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
[ Upstream commit 28dcca4cc0c01e2467549a36b1b0eacfdb01236c ]
Sync the BLAKE2b code with the BLAKE2s code as much as possible:
- Move a lot of code into new headers <crypto/blake2b.h> and <crypto/internal/blake2b.h>, and adjust it to be like the corresponding BLAKE2s code, i.e. like <crypto/blake2s.h> and <crypto/internal/blake2s.h>.
- Rename constants, e.g. BLAKE2B_*_DIGEST_SIZE => BLAKE2B_*_HASH_SIZE.
- Use a macro BLAKE2B_ALG() to define the shash_alg structs.
- Export blake2b_compress_generic() for use as a fallback.
This makes it much easier to add optimized implementations of BLAKE2b, as optimized implementations can use the helper functions crypto_blake2b_{setkey,init,update,final}() and blake2b_compress_generic(). The ARM implementation will use these.
But this change is also helpful because it eliminates unnecessary differences between the BLAKE2b and BLAKE2s code, so that the same improvements can easily be made to both. (The two algorithms are basically identical, except for the word size and constants.) It also makes it straightforward to add a library API for BLAKE2b in the future if/when it's needed.
This change does make the BLAKE2b code slightly more complicated than it needs to be, as it doesn't actually provide a library API yet. For example, __blake2b_update() doesn't really need to exist yet; it could just be inlined into crypto_blake2b_update(). But I believe this is outweighed by the benefits of keeping the code in sync.
Stable-dep-of: 9ae4577bc077 ("crypto: api - Use work queue in crypto_destroy_instance")
--- crypto/blake2b_generic.c | 226 +++++++----------------------- include/crypto/blake2b.h | 67 +++++++++ include/crypto/internal/blake2b.h | 115 +++++++++++++++ 3 files changed, 230 insertions(+), 178 deletions(-) create mode 100644 include/crypto/blake2b.h create mode 100644 include/crypto/internal/blake2b.h
crypto/blake2b_generic.c +48 -178
@@ -20,36 +20,11 @@#include <asm/unaligned.h> #include <linux/module.h> -#include <linux/string.h> #include <linux/kernel.h> #include <linux/bitops.h> +#include <crypto/internal/blake2b.h> #include <crypto/internal/hash.h> -#define BLAKE2B_160_DIGEST_SIZE (160 / 8) -#define BLAKE2B_256_DIGEST_SIZE (256 / 8) -#define BLAKE2B_384_DIGEST_SIZE (384 / 8) -#define BLAKE2B_512_DIGEST_SIZE (512 / 8) - -enum blake2b_constant { -BLAKE2B_BLOCKBYTES =128 , -BLAKE2B_KEYBYTES =64 , -}; - -struct blake2b_state { -u64 h[8 ]; -u64 t[2 ]; -u64 f[2 ]; -u8 buf[BLAKE2B_BLOCKBYTES ]; -size_t buflen; -}; - -static const u64 blake2b_IV[8 ] = { -0x6a09e667f3bcc908ULL ,0xbb67ae8584caa73bULL , -0x3c6ef372fe94f82bULL ,0xa54ff53a5f1d36f1ULL , -0x510e527fade682d1ULL ,0x9b05688c2b3e6c1fULL , -0x1f83d9abfb41bd6bULL ,0x5be0cd19137e2179ULL -}; -static const u8 blake2b_sigma[12 ][16 ] = { {0 ,1 ,2 ,3 ,4 ,5 ,6 ,7 ,8 ,9 ,10 ,11 ,12 ,13 ,14 ,15 }, {14 ,10 ,4 ,8 ,9 ,15 ,13 ,6 ,1 ,12 ,0 ,2 ,11 ,7 ,5 ,3 },
@@ -95,8 +70,8 @@ static void blake2b_increment_counter(struct blake2b_state *S, const u64 inc)G (r,7 ,v[3 ],v[4 ],v[9 ],v[14 ]); \ }while (0 ) -static void blake2b_compress(struct blake2b_state *S, -const u8 block[BLAKE2B_BLOCKBYTES ]) +static void blake2b_compress_one_generic(struct blake2b_state *S, +const u8 block[BLAKE2B_BLOCK_SIZE ]) {u64 m[16 ];u64 v[16 ];
@@ -108,14 +83,14 @@ static void blake2b_compress(struct blake2b_state *S,for (i =0 ; i <8 ; ++i) v[i] =S ->h[i]; - v[8 ] = blake2b_IV[0 ]; - v[9 ] = blake2b_IV[1 ]; - v[10 ] = blake2b_IV[2 ]; - v[11 ] = blake2b_IV[3 ]; - v[12 ] = blake2b_IV[4 ] ^S ->t[0 ]; - v[13 ] = blake2b_IV[5 ] ^S ->t[1 ]; - v[14 ] = blake2b_IV[6 ] ^S ->f[0 ]; - v[15 ] = blake2b_IV[7 ] ^S ->f[1 ]; + v[8 ] =BLAKE2B_IV0 ; + v[9 ] =BLAKE2B_IV1 ; + v[10 ] =BLAKE2B_IV2 ; + v[11 ] =BLAKE2B_IV3 ; + v[12 ] =BLAKE2B_IV4 ^S ->t[0 ]; + v[13 ] =BLAKE2B_IV5 ^S ->t[1 ]; + v[14 ] =BLAKE2B_IV6 ^S ->f[0 ]; + v[15 ] =BLAKE2B_IV7 ^S ->f[1 ];ROUND (0 );ROUND (1 );
@@ -139,159 +114,54 @@ static void blake2b_compress(struct blake2b_state *S,#undef G#undef ROUND -struct blake2b_tfm_ctx { -u8 key[BLAKE2B_KEYBYTES ]; -unsigned int keylen; -}; - -static int blake2b_setkey (struct crypto_shash *tfm,const u8 *key, -unsigned int keylen) +void blake2b_compress_generic (struct blake2b_state *state, +const u8 *block,size_t nblocks,u32 inc) { -struct blake2b_tfm_ctx *tctx =crypto_shash_ctx (tfm); - -if (keylen ==0 || keylen >BLAKE2B_KEYBYTES ) -return -EINVAL ; - -memcpy (tctx->key, key, keylen); - tctx->keylen = keylen; - -return 0 ; +do { +blake2b_increment_counter (state, inc); +blake2b_compress_one_generic (state, block); + block +=BLAKE2B_BLOCK_SIZE ; + }while (--nblocks); } +EXPORT_SYMBOL (blake2b_compress_generic); -static int blake2b_init (struct shash_desc *desc) +static int crypto_blake2b_update_generic (struct shash_desc *desc, +const u8 *in,unsigned int inlen) { -struct blake2b_tfm_ctx *tctx =crypto_shash_ctx (desc->tfm); -struct blake2b_state *state =shash_desc_ctx (desc); -const int digestsize =crypto_shash_digestsize (desc->tfm); - -memset (state,0 ,sizeof (*state)); -memcpy (state->h, blake2b_IV,sizeof (state->h)); - -/* Parameter block is all zeros except index 0, no xor for 1..7 */ - state->h[0 ] ^=0x01010000 | tctx->keylen <<8 | digestsize; - -if (tctx->keylen) { -/* -* Prefill the buffer with the key, next call to _update or -* _final will process it -*/ -memcpy (state->buf, tctx->key, tctx->keylen); - state->buflen =BLAKE2B_BLOCKBYTES ; - } -return 0 ; +return crypto_blake2b_update (desc, in, inlen, blake2b_compress_generic); } -static int blake2b_update (struct shash_desc *desc,const u8 *in, -unsigned int inlen) +static int crypto_blake2b_final_generic (struct shash_desc *desc,u8 *out) { -struct blake2b_state *state =shash_desc_ctx (desc); -const size_t left = state->buflen; -const size_t fill =BLAKE2B_BLOCKBYTES - left; - -if (!inlen) -return 0 ; - -if (inlen > fill) { - state->buflen =0 ; -/* Fill buffer */ -memcpy (state->buf + left, in, fill); -blake2b_increment_counter (state,BLAKE2B_BLOCKBYTES ); -/* Compress */ -blake2b_compress (state, state->buf); - in += fill; - inlen -= fill; -while (inlen >BLAKE2B_BLOCKBYTES ) { -blake2b_increment_counter (state,BLAKE2B_BLOCKBYTES ); -blake2b_compress (state, in); - in +=BLAKE2B_BLOCKBYTES ; - inlen -=BLAKE2B_BLOCKBYTES ; - } - } -memcpy (state->buf + state->buflen, in, inlen); - state->buflen += inlen; - -return 0 ; +return crypto_blake2b_final (desc, out, blake2b_compress_generic); } -static int blake2b_final (struct shash_desc *desc,u8 *out) -{ -struct blake2b_state *state =shash_desc_ctx (desc); -const int digestsize =crypto_shash_digestsize (desc->tfm); -size_t i; - -blake2b_increment_counter (state, state->buflen); -/* Set last block */ - state->f[0 ] = (u64)-1 ; -/* Padding */ -memset (state->buf + state->buflen,0 ,BLAKE2B_BLOCKBYTES - state->buflen); -blake2b_compress (state, state->buf); - -/* Avoid temporary buffer and switch the internal output to LE order */ -for (i =0 ; i <ARRAY_SIZE (state->h); i++) -__cpu_to_le64s (&state->h[i]); - -memcpy (out, state->h, digestsize); -return 0 ; -} +#define BLAKE2B_ALG (name, driver_name, digest_size) \ + { \ + .base.cra_name = name, \ + .base.cra_driver_name = driver_name, \ + .base.cra_priority = 100, \ + .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, \ + .base.cra_blocksize = BLAKE2B_BLOCK_SIZE, \ + .base.cra_ctxsize = sizeof(struct blake2b_tfm_ctx), \ + .base.cra_module = THIS_MODULE, \ + .digestsize = digest_size, \ + .setkey = crypto_blake2b_setkey, \ + .init = crypto_blake2b_init, \ + .update = crypto_blake2b_update_generic, \ + .final = crypto_blake2b_final_generic, \ + .descsize = sizeof(struct blake2b_state), \ + }static struct shash_alg blake2b_algs[] = { - { - .base.cra_name ="blake2b-160" , - .base.cra_driver_name ="blake2b-160-generic" , - .base.cra_priority =100 , - .base.cra_flags =CRYPTO_ALG_OPTIONAL_KEY , - .base.cra_blocksize =BLAKE2B_BLOCKBYTES , - .base.cra_ctxsize =sizeof (struct blake2b_tfm_ctx ), - .base.cra_module =THIS_MODULE , - .digestsize =BLAKE2B_160_DIGEST_SIZE , - .setkey = blake2b_setkey, - .init = blake2b_init, - .update = blake2b_update, - .final = blake2b_final, - .descsize =sizeof (struct blake2b_state ), - }, { - .base.cra_name ="blake2b-256" , - .base.cra_driver_name ="blake2b-256-generic" , - .base.cra_priority =100 , - .base.cra_flags =CRYPTO_ALG_OPTIONAL_KEY , - .base.cra_blocksize =BLAKE2B_BLOCKBYTES , - .base.cra_ctxsize =sizeof (struct blake2b_tfm_ctx ), - .base.cra_module =THIS_MODULE , - .digestsize =BLAKE2B_256_DIGEST_SIZE , - .setkey = blake2b_setkey, - .init = blake2b_init, - .update = blake2b_update, - .final = blake2b_final, - .descsize =sizeof (struct blake2b_state ), - }, { - .base.cra_name ="blake2b-384" , - .base.cra_driver_name ="blake2b-384-generic" , - .base.cra_priority =100 , - .base.cra_flags =CRYPTO_ALG_OPTIONAL_KEY , - .base.cra_blocksize =BLAKE2B_BLOCKBYTES , - .base.cra_ctxsize =sizeof (struct blake2b_tfm_ctx ), - .base.cra_module =THIS_MODULE , - .digestsize =BLAKE2B_384_DIGEST_SIZE , - .setkey = blake2b_setkey, - .init = blake2b_init, - .update = blake2b_update, - .final = blake2b_final, - .descsize =sizeof (struct blake2b_state ), - }, { - .base.cra_name ="blake2b-512" , - .base.cra_driver_name ="blake2b-512-generic" , - .base.cra_priority =100 , - .base.cra_flags =CRYPTO_ALG_OPTIONAL_KEY , - .base.cra_blocksize =BLAKE2B_BLOCKBYTES , - .base.cra_ctxsize =sizeof (struct blake2b_tfm_ctx ), - .base.cra_module =THIS_MODULE , - .digestsize =BLAKE2B_512_DIGEST_SIZE , - .setkey = blake2b_setkey, - .init = blake2b_init, - .update = blake2b_update, - .final = blake2b_final, - .descsize =sizeof (struct blake2b_state ), - } +BLAKE2B_ALG ("blake2b-160" ,"blake2b-160-generic" , +BLAKE2B_160_HASH_SIZE ), +BLAKE2B_ALG ("blake2b-256" ,"blake2b-256-generic" , +BLAKE2B_256_HASH_SIZE ), +BLAKE2B_ALG ("blake2b-384" ,"blake2b-384-generic" , +BLAKE2B_384_HASH_SIZE ), +BLAKE2B_ALG ("blake2b-512" ,"blake2b-512-generic" , +BLAKE2B_512_HASH_SIZE ), };static int __init blake2b_mod_init (void )
include/crypto/blake2b.h new file +67 -0
67 lines not on this page · raw message
include/crypto/internal/blake2b.h new file +115 -0
115 lines not on this page · raw message
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 97/406 crypto: api - Use work queue in crypto_destroy_instance
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herbert Xu <[email protected]>
[ Upstream commit 9ae4577bc077a7e32c3c7d442c95bc76865c0f17 ]
The function crypto_drop_spawn expects to be called in process context. However, when an instance is unregistered while it still has active users, the last user may cause the instance to be freed in atomic context.
Fix this by delaying the freeing to a work queue.
--- crypto/algapi.c | 16 ++++++++++++++-- include/crypto/algapi.h | 3 +++ 2 files changed, 17 insertions(+), 2 deletions(-)
crypto/algapi.c +14 -2
@@ -16,6 +16,7 @@#include <linux/rtnetlink.h> #include <linux/slab.h> #include <linux/string.h> +#include <linux/workqueue.h> #include "internal.h"
@@ -68,15 +69,26 @@ static void crypto_free_instance(struct crypto_instance *inst) inst->alg.cra_type->free (inst); } -static void crypto_destroy_instance (struct crypto_alg *alg) +static void crypto_destroy_instance_workfn (struct work_struct *w) { -struct crypto_instance *inst = (void *)alg; + struct crypto_instance *inst = container_of(w, struct crypto_instance, + free_work);struct crypto_template *tmpl = inst->tmpl;crypto_free_instance (inst);crypto_tmpl_put (tmpl); } +static void crypto_destroy_instance (struct crypto_alg *alg) +{ +struct crypto_instance *inst =container_of (alg, + struct crypto_instance, + alg); + +INIT_WORK (&inst->free_work, crypto_destroy_instance_workfn); +schedule_work (&inst->free_work); +} +/* * This function adds a spawn to the list secondary_spawns which * will be used at the end of crypto_remove_spawns to unregister
include/crypto/algapi.h +3 -0
@@ -10,6 +10,7 @@#include <linux/crypto.h> #include <linux/list.h> #include <linux/kernel.h> +#include <linux/workqueue.h> /* * Maximum values for blocksize and alignmask, used to allocate
@@ -55,6 +56,8 @@ struct crypto_instance {struct crypto_spawn *spawns; }; +struct work_struct free_work; + void *__ctx[] CRYPTO_MINALIGN_ATTR; };
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 98/406 Bluetooth: nokia: fix value check in nokia_bluetooth_serdev_probe()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yuanjun Gong <[email protected]>
[ Upstream commit e8b5aed31355072faac8092ead4938ddec3111fd ]
in nokia_bluetooth_serdev_probe(), check the return value of clk_prepare_enable() and return the error code if clk_prepare_enable() returns an unexpected value.
--- drivers/bluetooth/hci_nokia.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/bluetooth/hci_nokia.c +5 -1
@@ -734,7 +734,11 @@ static int nokia_bluetooth_serdev_probe(struct serdev_device *serdev)return err; } -clk_prepare_enable (sysclk); + err =clk_prepare_enable (sysclk); +if (err) { +dev_err (dev,"could not enable sysclk: %d" , err); +return err; + } btdev->sysclk_speed =clk_get_rate (sysclk);clk_disable_unprepare (sysclk);
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 99/406 Bluetooth: Fix potential use-after-free when clear keys
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Min Li <[email protected]>
[ Upstream commit 3673952cf0c6cf81b06c66a0b788abeeb02ff3ae ]
Similar to commit c5d2b6fa26b5 ("Bluetooth: Fix use-after-free in hci_remove_ltk/hci_remove_irk"). We can not access k after kfree_rcu() call.
--- net/bluetooth/hci_core.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
net/bluetooth/hci_core.c +8 -8
@@ -2343,9 +2343,9 @@ void hci_uuids_clear(struct hci_dev *hdev)void hci_link_keys_clear (struct hci_dev *hdev) { -struct link_key *key; +struct link_key *key, *tmp; -list_for_each_entry (key, &hdev->link_keys, list) { +list_for_each_entry_safe (key, tmp, &hdev->link_keys, list) {list_del_rcu (&key->list);kfree_rcu (key, rcu); }
@@ -2353,9 +2353,9 @@ void hci_link_keys_clear(struct hci_dev *hdev)void hci_smp_ltks_clear (struct hci_dev *hdev) { -struct smp_ltk *k; +struct smp_ltk *k, *tmp; -list_for_each_entry (k, &hdev->long_term_keys, list) { +list_for_each_entry_safe (k, tmp, &hdev->long_term_keys, list) {list_del_rcu (&k->list);kfree_rcu (k, rcu); }
@@ -2363,9 +2363,9 @@ void hci_smp_ltks_clear(struct hci_dev *hdev)void hci_smp_irks_clear (struct hci_dev *hdev) { -struct smp_irk *k; +struct smp_irk *k, *tmp; -list_for_each_entry (k, &hdev->identity_resolving_keys, list) { +list_for_each_entry_safe (k, tmp, &hdev->identity_resolving_keys, list) {list_del_rcu (&k->list);kfree_rcu (k, rcu); }
@@ -2373,9 +2373,9 @@ void hci_smp_irks_clear(struct hci_dev *hdev)void hci_blocked_keys_clear (struct hci_dev *hdev) { -struct blocked_key *b; +struct blocked_key *b, *tmp; -list_for_each_entry (b, &hdev->blocked_keys, list) { +list_for_each_entry_safe (b, tmp, &hdev->blocked_keys, list) {list_del_rcu (&b->list);kfree_rcu (b, rcu); }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 100/406 net: tcp: fix unexcepted socket die when snd_wnd is 0
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Menglong Dong <[email protected]>
[ Upstream commit e89688e3e97868451a5d05b38a9d2633d6785cd4 ]
In tcp_retransmit_timer(), a window shrunk connection will be regarded as timeout if 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX'. This is not right all the time.
The retransmits will become zero-window probes in tcp_retransmit_timer() if the 'snd_wnd==0'. Therefore, the icsk->icsk_rto will come up to TCP_RTO_MAX sooner or later.
However, the timer can be delayed and be triggered after 122877ms, not TCP_RTO_MAX, as I tested.
Therefore, 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX' is always true once the RTO come up to TCP_RTO_MAX, and the socket will die.
Fix this by replacing the 'tcp_jiffies32' with '(u32)icsk->icsk_timeout', which is exact the timestamp of the timeout.
However, "tp->rcv_tstamp" can restart from idle, then tp->rcv_tstamp could already be a long time (minutes or hours) in the past even on the first RTO. So we double check the timeout with the duration of the retransmission.
Meanwhile, making "2 * TCP_RTO_MAX" as the timeout to avoid the socket dying too soon.
--- net/ipv4/tcp_timer.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
net/ipv4/tcp_timer.c +17 -1
@@ -437,6 +437,22 @@ static void tcp_fastopen_synack_timer(struct sock *sk, struct request_sock *req) TCP_TIMEOUT_INIT << req->num_timeout, TCP_RTO_MAX); } +static bool tcp_rtx_probe0_timed_out (const struct sock *sk, +const struct sk_buff *skb) +{ +const struct tcp_sock *tp =tcp_sk (sk); +const int timeout =TCP_RTO_MAX *2 ; +u32 rcv_delta, rtx_delta; + + rcv_delta =inet_csk (sk)->icsk_timeout - tp->rcv_tstamp; +if (rcv_delta <= timeout) +return false; + + rtx_delta = (u32 )msecs_to_jiffies (tcp_time_stamp (tp) - + (tp->retrans_stamp ?:tcp_skb_timestamp (skb))); + +return rtx_delta > timeout; +}/** * tcp_retransmit_timer() - The TCP retransmit timeout handler
@@ -502,7 +518,7 @@ void tcp_retransmit_timer(struct sock *sk) tp->snd_una, tp->snd_nxt); }#endif -if (tcp_jiffies32 - tp->rcv_tstamp >TCP_RTO_MAX ) { +if (tcp_rtx_probe0_timed_out (sk, skb)) {tcp_write_err (sk); goto out; }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 101/406 selftests/bpf: Clean up fmod_ret in bench_rename test script
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yipeng Zou <[email protected]>
[ Upstream commit 83a89c4b6ae93481d3f618aba6a29d89208d26ed ]
Running the bench_rename test script, the following error occurs:
# ./benchs/run_bench_rename.sh base : 0.819 ± 0.012M/s kprobe : 0.538 ± 0.009M/s kretprobe : 0.503 ± 0.004M/s rawtp : 0.779 ± 0.020M/s fentry : 0.726 ± 0.007M/s fexit : 0.691 ± 0.007M/s benchmark 'rename-fmodret' not found
The bench_rename_fmodret has been removed in commit b000def2e052 ("selftests: Remove fmod_ret from test_overhead"), thus remove it from the runners in the test script.
--- tools/testing/selftests/bpf/benchs/run_bench_rename.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/bpf/benchs/run_bench_rename.sh +1 -1
@@ -2,7 +2,7 @@ set -eufo pipefail -for i in base kprobe kretprobe rawtp fentry fexit fmodret +for i in base kprobe kretprobe rawtp fentry fexit do summary=$(sudo ./bench -w2 -d5 -a rename-$i | tail -n1 | cut -d'(' -f1 | cut -d' ' -f3-) printf "%-10s: %s\n" $i "$summary"
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 102/406 ice: ice_aq_check_events: fix off-by-one check when filling buffer
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Przemek Kitszel <[email protected]>
[ Upstream commit e1e8a142c43336e3d25bfa1cb3a4ae7d00875c48 ]
Allow task's event buffer to be filled also in the case that it's size is exactly the size of the message.
--- drivers/net/ethernet/intel/ice/ice_main.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/net/ethernet/intel/ice/ice_main.c +7 -6
@@ -1137,6 +1137,7 @@ int ice_aq_wait_for_event(struct ice_pf *pf, u16 opcode, unsigned long timeout,static void ice_aq_check_events (struct ice_pf *pf,u16 opcode,struct ice_rq_event_info *event) { +struct ice_rq_event_info *task_ev;struct ice_aq_task *task;bool found = false;
@@ -1145,15 +1146,15 @@ static void ice_aq_check_events(struct ice_pf *pf, u16 opcode,if (task->state || task->opcode != opcode)continue ; -memcpy (&task->event->desc, &event->desc,sizeof (event->desc)); - task->event->msg_len = event->msg_len; + task_ev = task->event; +memcpy (&task_ev->desc, &event->desc,sizeof (event->desc)); + task_ev->msg_len = event->msg_len;/* Only copy the data buffer if a destination was set */ -if (task->event->msg_buf && - task->event->buf_len > event->buf_len) { -memcpy (task->event->msg_buf, event->msg_buf, +if (task_ev->msg_buf && task_ev->buf_len >= event->buf_len) { +memcpy (task_ev->msg_buf, event->msg_buf, event->buf_len); - task->event->buf_len = event->buf_len; + task_ev->buf_len = event->buf_len; } task->state =ICE_AQ_TASK_COMPLETE ;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 103/406 crypto: caam - fix unchecked return value error
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gaurav Jain <[email protected]>
[ Upstream commit e30685204711a6be40dec2622606950ccd37dafe ]
error:
Unchecked return value (CHECKED_RETURN)check_return: Calling sg_miter_next without checking return value
fix:
added check if(!sg_miter_next)
--- drivers/crypto/caam/caampkc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/crypto/caam/caampkc.c +3 -1
@@ -222,7 +222,9 @@ static int caam_rsa_count_leading_zeros(struct scatterlist *sgl,if (len && *buff)break ; -sg_miter_next (&miter); +if (!sg_miter_next (&miter)) +break ; + buff = miter.addr; len = miter.length;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 104/406 hwrng: iproc-rng200 - Implement suspend and resume calls
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Fainelli <[email protected]>
[ Upstream commit 8e03dd62e5be811efbf0cbeba47e79e793519105 ]
Chips such as BCM7278 support system wide suspend/resume which will cause the HWRNG block to lose its state and reset to its power on reset register values. We need to cleanup and re-initialize the HWRNG for it to be functional coming out of a system suspend cycle.
--- drivers/char/hw_random/iproc-rng200.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
drivers/char/hw_random/iproc-rng200.c +25 -0
@@ -195,6 +195,8 @@ static int iproc_rng200_probe(struct platform_device *pdev)return PTR_ERR (priv->base); } +dev_set_drvdata (dev, priv); + priv->rng.name ="iproc-rng200" ; priv->rng.read = iproc_rng200_read; priv->rng.init = iproc_rng200_init;
@@ -212,6 +214,28 @@ static int iproc_rng200_probe(struct platform_device *pdev)return 0 ; } +static int __maybe_unused iproc_rng200_suspend (struct device *dev) +{ +struct iproc_rng200_dev *priv =dev_get_drvdata (dev); + +iproc_rng200_cleanup (&priv->rng); + +return 0 ; +} + +static int __maybe_unused iproc_rng200_resume (struct device *dev) +{ +struct iproc_rng200_dev *priv =dev_get_drvdata (dev); + +iproc_rng200_init (&priv->rng); + +return 0 ; +} + +static const struct dev_pm_ops iproc_rng200_pm_ops = { +SET_SYSTEM_SLEEP_PM_OPS (iproc_rng200_suspend, iproc_rng200_resume) +}; +static const struct of_device_id iproc_rng200_of_match[] = { { .compatible ="brcm,bcm2711-rng200" , }, { .compatible ="brcm,bcm7211-rng200" , },
@@ -225,6 +249,7 @@ static struct platform_driver iproc_rng200_driver = { .driver = { .name = "iproc-rng200", .of_match_table = iproc_rng200_of_match, + .pm = &iproc_rng200_pm_ops, }, .probe = iproc_rng200_probe, };
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 105/406 lwt: Fix return values of BPF xmit ops
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yan Zhai <[email protected]>
[ Upstream commit 29b22badb7a84b783e3a4fffca16f7768fb31205 ]
BPF encap ops can return different types of positive values, such like NET_RX_DROP, NET_XMIT_CN, NETDEV_TX_BUSY, and so on, from function skb_do_redirect and bpf_lwt_xmit_reroute. At the xmit hook, such return values would be treated implicitly as LWTUNNEL_XMIT_CONTINUE in ip(6)_finish_output2. When this happens, skbs that have been freed would continue to the neighbor subsystem, causing use-after-free bug and kernel crashes.
To fix the incorrect behavior, skb_do_redirect return values can be simply discarded, the same as tc-egress behavior. On the other hand, bpf_lwt_xmit_reroute returns useful errors to local senders, e.g. PMTU information. Thus convert its return values to avoid the conflict with LWTUNNEL_XMIT_CONTINUE.
--- net/core/lwt_bpf.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
net/core/lwt_bpf.c +3 -4
@@ -59,9 +59,8 @@ static int run_lwt_bpf(struct sk_buff *skb, struct bpf_lwt_prog *lwt, ret =BPF_OK ; }else {skb_reset_mac_header (skb); - ret =skb_do_redirect (skb); -if (ret ==0 ) - ret =BPF_REDIRECT ; +skb_do_redirect (skb); + ret =BPF_REDIRECT ; }break ;
@@ -254,7 +253,7 @@ static int bpf_lwt_xmit_reroute(struct sk_buff *skb) err =dst_output (dev_net (skb_dst (skb)->dev), skb->sk, skb);if (unlikely (err)) -return err; +return net_xmit_errno (err);/* ip[6]_finish_output2 understand LWTUNNEL_XMIT_DONE */ return LWTUNNEL_XMIT_DONE ;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 79/406 s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Holger Dengler <[email protected]>
[ Upstream commit cba33db3fc4dbf2e54294b0e499d2335a3a00d78 ]
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced PKEY_TYPE_EP11_AES securekey blobs as a supplement to the PKEY_TYPE_EP11 (which won't work in environments with session-bound keys). This new keyblobs has a different maximum size, so fix paes crypto module to accept also these larger keyblobs.
--- arch/s390/crypto/paes_s390.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/s390/crypto/paes_s390.c +1 -1
@@ -34,7 +34,7 @@* and padding is also possible, the limits need to be generous. */ #define PAES_MIN_KEYSIZE 16 -#define PAES_MAX_KEYSIZE 320 +#define PAES_MAX_KEYSIZE MAXEP11AESKEYBLOBSIZEstatic u8 *ctrblk;static DEFINE_MUTEX (ctrblk_lock);
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 106/406 lwt: Check LWTUNNEL_XMIT_CONTINUE strictly
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yan Zhai <[email protected]>
[ Upstream commit a171fbec88a2c730b108c7147ac5e7b2f5a02b47 ]
LWTUNNEL_XMIT_CONTINUE is implicitly assumed in ip(6)_finish_output2, such that any positive return value from a xmit hook could cause unexpected continue behavior, despite that related skb may have been freed. This could be error-prone for future xmit hook ops. One of the possible errors is to return statuses of dst_output directly.
To make the code safer, redefine LWTUNNEL_XMIT_CONTINUE value to distinguish from dst_output statuses and check the continue condition explicitly.
--- include/net/lwtunnel.h | 5 ++++- net/ipv4/ip_output.c | 2 +- net/ipv6/ip6_output.c | 2 +- 3 files changed, 6 insertions(+), 3 deletions(-)
include/net/lwtunnel.h +4 -1
@@ -16,9 +16,12 @@#define LWTUNNEL_STATE_INPUT_REDIRECT BIT(1)#define LWTUNNEL_STATE_XMIT_REDIRECT BIT(2) +/* LWTUNNEL_XMIT_CONTINUE should be distinguishable from dst_output return +* values (NET_XMIT_xxx and NETDEV_TX_xxx in linux/netdevice.h) for safety. +*/ enum {LWTUNNEL_XMIT_DONE , -LWTUNNEL_XMIT_CONTINUE , +LWTUNNEL_XMIT_CONTINUE =0x100 , };
net/ipv4/ip_output.c +1 -1
@@ -223,7 +223,7 @@ static int ip_finish_output2(struct net *net, struct sock *sk, struct sk_buff *sif (lwtunnel_xmit_redirect (dst->lwtstate)) {int res =lwtunnel_xmit (skb); -if (res <0 || res ==LWTUNNEL_XMIT_DONE ) +if (res !=LWTUNNEL_XMIT_CONTINUE )return res; }
net/ipv6/ip6_output.c +1 -1
@@ -131,7 +131,7 @@ static int ip6_finish_output2(struct net *net, struct sock *sk, struct sk_buff *if (lwtunnel_xmit_redirect (dst->lwtstate)) {int res =lwtunnel_xmit (skb); -if (res <0 || res ==LWTUNNEL_XMIT_DONE ) +if (res !=LWTUNNEL_XMIT_CONTINUE )return res; }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 107/406 fs: ocfs2: namei: check return value of ocfs2_add_entry()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Artem Chernyshev <[email protected]>
[ Upstream commit 6b72e5f9e79360fce4f2be7fe81159fbdf4256a5 ]
Process result of ocfs2_add_entry() in case we have an error value.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
--- fs/ocfs2/namei.c | 4 ++++ 1 file changed, 4 insertions(+)
fs/ocfs2/namei.c +4 -0
@@ -1532,6 +1532,10 @@ static int ocfs2_rename(struct inode *old_dir, status =ocfs2_add_entry (handle, new_dentry, old_inode,OCFS2_I (old_inode)->ip_blkno, new_dir_bh, &target_insert); +if (status <0 ) { +mlog_errno (status); + goto bail; + } } old_inode->i_ctime =current_time (old_inode);
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 80/406 x86/efistub: Fix PCI ROM preservation in mixed mode
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikel Rychliski <[email protected]>
[ Upstream commit 8b94da92559f7e403dc7ab81937cc50f949ee2fd ]
preserve_pci_rom_image() was accessing the romsize field in efi_pci_io_protocol_t directly instead of using the efi_table_attr() helper. This prevents the ROM image from being saved correctly during a mixed mode boot.
--- drivers/firmware/efi/libstub/x86-stub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/firmware/efi/libstub/x86-stub.c +1 -1
@@ -60,7 +60,7 @@ preserve_pci_rom_image(efi_pci_io_protocol_t *pci, struct pci_setup_rom **__rom) rom->data.type =SETUP_PCI ; rom->data.len = size -sizeof (struct setup_data ); rom->data.next =0 ; - rom->pcilen = pci->romsize; + rom->pcilen = romsize; *__rom = rom; status = efi_call_proto(pci, pci.read, EfiPciIoWidthUint16,
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 81/406 cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liao Chang <[email protected]>
[ Upstream commit 03997da042dac73c69e60d91942c727c76828b65 ]
Since the 'cpus' field of policy structure will become empty in the cpufreq core API, it is better to use 'related_cpus' in the exit() callback of driver.
--- drivers/cpufreq/powernow-k8.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/cpufreq/powernow-k8.c +2 -1
@@ -1101,7 +1101,8 @@ static int powernowk8_cpu_exit(struct cpufreq_policy *pol)kfree (data->powernow_table);kfree (data); -for_each_cpu (cpu, pol->cpus) +/* pol->cpus will be empty here, use related_cpus instead. */ +for_each_cpu (cpu, pol->related_cpus)per_cpu (powernow_data, cpu) =NULL ;return 0 ;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 82/406 bpftool: Use a local bpf_perf_event_value to fix accessing its fields
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Lobakin <[email protected]>
[ Upstream commit 658ac06801315b739774a15796ff06913ef5cad5 ]
Fix the following error when building bpftool:
CLANG profiler.bpf.o
CLANG pid_iter.bpf.oskeleton/profiler.bpf.c:18:21: error: invalid application of 'sizeof' to an incomplete type 'struct bpf_perf_event_value'
__uint(value_size, sizeof(struct bpf_perf_event_value));
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:13:39: note: expanded from macro '__uint'
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helper_defs.h:7:8: note: forward declaration of 'struct bpf_perf_event_value'
struct bpf_perf_event_value;
^struct bpf_perf_event_value is being used in the kernel only when CONFIG_BPF_EVENTS is enabled, so it misses a BTF entry then. Define struct bpf_perf_event_value___local with the preserve_access_index attribute inside the pid_iter BPF prog to allow compiling on any configs. It is a full mirror of a UAPI structure, so is compatible both with and w/o CO-RE. bpf_perf_event_read_value() requires a pointer of the original type, so a cast is needed.
--- tools/bpf/bpftool/skeleton/profiler.bpf.c | 27 ++++++++++++++--------- 1 file changed, 17 insertions(+), 10 deletions(-)
tools/bpf/bpftool/skeleton/profiler.bpf.c +17 -10
@@ -4,6 +4,12 @@#include <bpf/bpf_helpers.h> #include <bpf/bpf_tracing.h> +struct bpf_perf_event_value___local { +__u64 counter; +__u64 enabled; +__u64 running; +} __attribute__((preserve_access_index)); +/* map of perf event fds, num_cpu * num_metric entries */ struct { __uint(type, BPF_MAP_TYPE_PERF_EVENT_ARRAY);
@@ -15,14 +21,14 @@ struct {struct { __uint(type, BPF_MAP_TYPE_PERCPU_ARRAY); __uint(key_size, sizeof(u32)); - __uint(value_size, sizeof(struct bpf_perf_event_value)); + __uint(value_size, sizeof(struct bpf_perf_event_value___local)); } fentry_readings SEC(".maps");/* accumulated readings */ struct { __uint(type, BPF_MAP_TYPE_PERCPU_ARRAY); __uint(key_size, sizeof(u32)); - __uint(value_size, sizeof(struct bpf_perf_event_value)); + __uint(value_size, sizeof(struct bpf_perf_event_value___local)); } accum_readings SEC(".maps");/* sample counts, one per cpu */
@@ -39,7 +45,7 @@ const volatile __u32 num_metric = 1; SEC("fentry/XXX")int BPF_PROG (fentry_XXX ) { -struct bpf_perf_event_value *ptrs[MAX_NUM_MATRICS ]; +struct bpf_perf_event_value___local *ptrs[MAX_NUM_MATRICS ];u32 key =bpf_get_smp_processor_id ();u32 i;
@@ -53,10 +59,10 @@ int BPF_PROG(fentry_XXX) }for (i =0 ; i < num_metric && i <MAX_NUM_MATRICS ; i++) { -struct bpf_perf_event_value reading; +struct bpf_perf_event_value___local reading;int err; - err =bpf_perf_event_read_value (&events, key, &reading, + err =bpf_perf_event_read_value (&events, key, (void *)&reading,sizeof (reading));if (err)return 0 ;
@@ -68,14 +74,14 @@ int BPF_PROG(fentry_XXX) }static inline void -fexit_update_maps (u32 id,struct bpf_perf_event_value *after) +fexit_update_maps (u32 id,struct bpf_perf_event_value___local *after) { -struct bpf_perf_event_value *before, diff; +struct bpf_perf_event_value___local *before, diff; before =bpf_map_lookup_elem (&fentry_readings, &id);/* only account samples with a valid fentry_reading */ if (before && before->counter) { -struct bpf_perf_event_value *accum; +struct bpf_perf_event_value___local *accum; diff.counter = after->counter - before->counter; diff.enabled = after->enabled - before->enabled;
@@ -93,7 +99,7 @@ fexit_update_maps(u32 id, struct bpf_perf_event_value *after) SEC("fexit/XXX")int BPF_PROG (fexit_XXX ) { -struct bpf_perf_event_value readings[MAX_NUM_MATRICS ]; +struct bpf_perf_event_value___local readings[MAX_NUM_MATRICS ];u32 cpu =bpf_get_smp_processor_id ();u32 i, zero =0 ;int err;
@@ -102,7 +108,8 @@ int BPF_PROG(fexit_XXX)/* read all events before updating the maps, to reduce error */ for (i =0 ; i < num_metric && i <MAX_NUM_MATRICS ; i++) { err =bpf_perf_event_read_value (&events, cpu + i * num_cpu, - readings + i,sizeof (*readings)); + (void *)(readings + i), +sizeof (*readings));if (err)return 0 ; }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 83/406 bpf: Clear the probe_addr for uprobe
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yafang Shao <[email protected]>
[ Upstream commit 5125e757e62f6c1d5478db4c2b61a744060ddf3f ]
To avoid returning uninitialized or random values when querying the file descriptor (fd) and accessing probe_addr, it is necessary to clear the variable prior to its use.
--- include/linux/trace_events.h | 3 ++- kernel/trace/bpf_trace.c | 2 +- kernel/trace/trace_uprobe.c | 3 ++- 3 files changed, 5 insertions(+), 3 deletions(-)
include/linux/trace_events.h +2 -1
@@ -745,7 +745,8 @@ extern int perf_uprobe_init(struct perf_event *event,extern void perf_uprobe_destroy (struct perf_event *event);extern int bpf_get_uprobe_info (const struct perf_event *event,u32 *fd_type,const char **filename, -u64 *probe_offset,bool perf_type_tracepoint); +u64 *probe_offset,u64 *probe_addr, +bool perf_type_tracepoint);#endif extern int ftrace_profile_set_filter (struct perf_event *event,int event_id,char *filter_str);
kernel/trace/bpf_trace.c +1 -1
@@ -2174,7 +2174,7 @@ int bpf_get_perf_event_info(const struct perf_event *event, u32 *prog_id,#ifdef CONFIG_UPROBE_EVENTS if (flags &TRACE_EVENT_FL_UPROBE ) err =bpf_get_uprobe_info (event, fd_type, buf, - probe_offset, + probe_offset, probe_addr, event->attr.type ==PERF_TYPE_TRACEPOINT );#endif }
kernel/trace/trace_uprobe.c +2 -1
@@ -1422,7 +1422,7 @@ static void uretprobe_perf_func(struct trace_uprobe *tu, unsigned long func,int bpf_get_uprobe_info (const struct perf_event *event,u32 *fd_type,const char **filename,u64 *probe_offset, -bool perf_type_tracepoint) +u64 *probe_addr,bool perf_type_tracepoint) {const char *pevent =trace_event_name (event->tp_event);const char *group = event->tp_event->class->system;
@@ -1439,6 +1439,7 @@ int bpf_get_uprobe_info(const struct perf_event *event, u32 *fd_type, : BPF_FD_TYPE_UPROBE; *filename = tu->filename; *probe_offset = tu->offset; + *probe_addr =0 ; return 0; }#endif /* CONFIG_PERF_EVENTS */
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 84/406 tcp: tcp_enter_quickack_mode() should be static
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 03b123debcbc8db987bda17ed8412cc011064c22 ]
After commit d2ccd7bc8acd ("tcp: avoid resetting ACK timer in DCTCP"), tcp_enter_quickack_mode() is only used from net/ipv4/tcp_input.c.
--- include/net/tcp.h | 1 - net/ipv4/tcp_input.c | 3 +-- 2 files changed, 1 insertion(+), 3 deletions(-)
include/net/tcp.h +0 -1
@@ -337,7 +337,6 @@ ssize_t tcp_splice_read(struct socket *sk, loff_t *ppos, struct pipe_inode_info *pipe, size_t len, unsigned int flags); -void tcp_enter_quickack_mode (struct sock *sk,unsigned int max_quickacks);static inline void tcp_dec_quickack_mode (struct sock *sk,const unsigned int pkts) {
net/ipv4/tcp_input.c +1 -2
@@ -286,7 +286,7 @@ static void tcp_incr_quickack(struct sock *sk, unsigned int max_quickacks) icsk->icsk_ack.quick = quickacks; } -void tcp_enter_quickack_mode (struct sock *sk,unsigned int max_quickacks) +static void tcp_enter_quickack_mode (struct sock *sk,unsigned int max_quickacks) {struct inet_connection_sock *icsk =inet_csk (sk);
@@ -294,7 +294,6 @@ void tcp_enter_quickack_mode(struct sock *sk, unsigned int max_quickacks)inet_csk_exit_pingpong_mode (sk); icsk->icsk_ack.ato =TCP_ATO_MIN ; } -EXPORT_SYMBOL (tcp_enter_quickack_mode);/* Send ACKs quickly, if "quick" count is not exhausted * and the session is not interactive.
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 85/406 hwrng: nomadik - keep clock enabled while hwrng is registered
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Kaiser <[email protected]>
[ Upstream commit 039980de89dc9dd757418d6f296e4126cc3f86c3 ]
The nomadik driver uses devres to register itself with the hwrng core, the driver will be unregistered from hwrng when its device goes out of scope. This happens after the driver's remove function is called.
However, nomadik's clock is disabled in the remove function. There's a short timeframe where nomadik is still registered with the hwrng core although its clock is disabled. I suppose the clock must be active to access the hardware and serve requests from the hwrng core.
Switch to devm_clk_get_enabled and let devres disable the clock and unregister the hwrng. This avoids the race condition.
--- drivers/char/hw_random/nomadik-rng.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-)
drivers/char/hw_random/nomadik-rng.c +3 -9
@@ -13,8 +13,6 @@#include <linux/clk.h> #include <linux/err.h> -static struct clk *rng_clk; -static int nmk_rng_read (struct hwrng *rng,void *data,size_t max,bool wait) {void __iomem *base = (void __iomem *)rng->priv;
@@ -36,21 +34,20 @@ static struct hwrng nmk_rng = {static int nmk_rng_probe (struct amba_device *dev,const struct amba_id *id) { +struct clk *rng_clk;void __iomem *base;int ret; - rng_clk =devm_clk_get (&dev->dev,NULL ); + rng_clk =devm_clk_get_enabled (&dev->dev,NULL );if (IS_ERR (rng_clk)) {dev_err (&dev->dev,"could not get rng clock\n" ); ret =PTR_ERR (rng_clk);return ret; } -clk_prepare_enable (rng_clk); - ret =amba_request_regions (dev, dev->dev.init_name);if (ret) - goto out_clk; +return ret; ret = -ENOMEM ; base =devm_ioremap (&dev->dev, dev->res.start,resource_size (&dev->res));
@@ -64,15 +61,12 @@ static int nmk_rng_probe(struct amba_device *dev, const struct amba_id *id) out_release:amba_release_regions (dev); -out_clk: -clk_disable_unprepare (rng_clk);return ret; }static void nmk_rng_remove (struct amba_device *dev) {amba_release_regions (dev); -clk_disable_unprepare (rng_clk); }static const struct amba_id nmk_rng_ids[] = {
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 76/406 x86/decompressor: Dont rely on upper 32 bits of GPRs being preserved
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ard Biesheuvel <[email protected]>
[ Upstream commit 264b82fdb4989cf6a44a2bcd0c6ea05e8026b2ac ]
The 4-to-5 level mode switch trampoline disables long mode and paging in order to be able to flick the LA57 bit. According to section 3.4.1.1 of the x86 architecture manual [0], 64-bit GPRs might not retain the upper 32 bits of their contents across such a mode switch.
Given that RBP, RBX and RSI are live at this point, preserve them on the stack, along with the return address that might be above 4G as well.
[0] Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 1: Basic Architecture
"Because the upper 32 bits of 64-bit general-purpose registers are
undefined in 32-bit modes, the upper 32 bits of any general-purpose register are not preserved when switching from 64-bit mode to a 32-bit mode (to protected mode or compatibility mode). Software must not depend on these bits to maintain a value after a 64-bit to 32-bit mode switch."
--- arch/x86/boot/compressed/head_64.S | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-)
arch/x86/boot/compressed/head_64.S +23 -7
@@ -454,11 +454,25 @@ SYM_CODE_START(startup_64) /* Save the trampoline address in RCX */ movq %rax, %rcx + /* Set up 32-bit addressable stack */ + leaq TRAMPOLINE_32BIT_STACK_END(%rcx), %rsp + + /* + * Preserve live 64-bit registers on the stack: this is necessary + * because the architecture does not guarantee that GPRs will retain + * their full 64-bit values across a 32-bit mode switch. + */ + pushq %rbp + pushq %rbx + pushq %rsi + /* - * Load the address of trampoline_return() into RDI. - * It will be used by the trampoline to return to the main code. + * Push the 64-bit address of trampoline_return() onto the new stack. + * It will be used by the trampoline to return to the main code. Due to + * the 32-bit mode switch, it cannot be kept it in a register either. */ leaq trampoline_return(%rip), %rdi + pushq %rdi /* Switch to compatibility mode (CS.L = 0 CS.D = 1) via far return */ pushq $__KERNEL32_CS
@@ -466,6 +480,11 @@ SYM_CODE_START(startup_64) pushq %rax lretq trampoline_return: + /* Restore live 64-bit registers */ + popq %rsi + popq %rbx + popq %rbp + /* Restore the stack, the 32-bit trampoline uses its own stack */ leaq rva(boot_stack_end)(%rbx), %rsp
@@ -586,7 +605,7 @@ SYM_FUNC_END(.Lrelocated) /* * This is the 32-bit trampoline that will be copied over to low memory. * - * RDI contains the return address (might be above 4G). + * Return address is at the top of the stack (might be above 4G). * ECX contains the base address of the trampoline memory. * Non zero RDX means trampoline needs to enable 5-level paging. */
@@ -596,9 +615,6 @@ SYM_CODE_START(trampoline_32bit_src) movl %eax, %ds movl %eax, %ss - /* Set up new stack */ - leal TRAMPOLINE_32BIT_STACK_END(%ecx), %esp - /* Disable paging */ movl %cr0, %eax btrl $X86_CR0_PG_BIT, %eax
@@ -658,7 +674,7 @@ SYM_CODE_END(trampoline_32bit_src) .code64 SYM_FUNC_START_LOCAL_NOALIGN(.Lpaging_enabled) /* Return from the trampoline */ - jmp *%rdi + retq SYM_FUNC_END(.Lpaging_enabled) /*
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 109/406 wifi: mwifiex: Fix missed return in oob checks failed path
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Polaris Pi <[email protected]>
[ Upstream commit 2785851c627f2db05f9271f7f63661b5dbd95c4c ]
Add missed return in mwifiex_uap_queue_bridged_pkt() and mwifiex_process_rx_packet().
--- drivers/net/wireless/marvell/mwifiex/sta_rx.c | 1 + drivers/net/wireless/marvell/mwifiex/uap_txrx.c | 1 + 2 files changed, 2 insertions(+)
drivers/net/wireless/marvell/mwifiex/sta_rx.c +1 -0
@@ -104,6 +104,7 @@ int mwifiex_process_rx_packet(struct mwifiex_private *priv, skb->len, rx_pkt_off); priv->stats.rx_dropped++;dev_kfree_skb_any (skb); +return -1 ; } if ((!memcmp(&rx_pkt_hdr->rfc1042_hdr, bridge_tunnel_header,
drivers/net/wireless/marvell/mwifiex/uap_txrx.c +1 -0
@@ -122,6 +122,7 @@ static void mwifiex_uap_queue_bridged_pkt(struct mwifiex_private *priv, skb->len, le16_to_cpu(uap_rx_pd->rx_pkt_offset)); priv->stats.rx_dropped++;dev_kfree_skb_any (skb); +return ; } if ((!memcmp(&rx_pkt_hdr->rfc1042_hdr, bridge_tunnel_header,
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 118/406 mlxsw: i2c: Limit single transaction buffer size
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vadim Pasternak <[email protected]>
[ Upstream commit d7248f1cc835bd80e936dc5b2d94b149bdd0077d ]
Maximum size of buffer is obtained from underlying I2C adapter and in case adapter allows I2C transaction buffer size greater than 100 bytes, transaction will fail due to firmware limitation.
As a result driver will fail initialization.
Limit the maximum size of transaction buffer by 100 bytes to fit to firmware.
Remove unnecessary calculation:max_t(u16, MLXSW_I2C_BLK_DEF, quirk_size).
This condition can not happened.
--- drivers/net/ethernet/mellanox/mlxsw/i2c.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlxsw/i2c.c +2 -1
@@ -47,6 +47,7 @@#define MLXSW_I2C_MBOX_SIZE_BITS 12#define MLXSW_I2C_ADDR_BUF_SIZE 4#define MLXSW_I2C_BLK_DEF 32 +#define MLXSW_I2C_BLK_MAX 100#define MLXSW_I2C_RETRY 5#define MLXSW_I2C_TIMEOUT_MSECS 5000#define MLXSW_I2C_MAX_DATA_SIZE 256
@@ -576,7 +577,7 @@ static int mlxsw_i2c_probe(struct i2c_client *client,return -EOPNOTSUPP ; } - mlxsw_i2c->block_size =max_t (u16,MLXSW_I2C_BLK_DEF , + mlxsw_i2c->block_size =min_t (u16,MLXSW_I2C_BLK_MAX ,min_t (u16, quirks->max_read_len, quirks->max_write_len)); }else {
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 119/406 hwmon: (tmp513) Fix the channel number in tmp51x_is_visible()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Biju Das <[email protected]>
[ Upstream commit d103337e38e7e64c3d915029e947b1cb0b512737 ]
The supported channels for this driver are {0..3}. Fix the incorrect channel in tmp51x_is_visible().
--- drivers/hwmon/tmp513.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwmon/tmp513.c +1 -1
@@ -434,7 +434,7 @@ static umode_t tmp51x_is_visible(const void *_data,switch (type) {case hwmon_temp: -if (data->id == tmp512 && channel ==4 ) +if (data->id == tmp512 && channel ==3 )return 0 ;switch (attr) {case hwmon_temp_input:
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 120/406 net/sched: sch_hfsc: Ensure inner classes have fsc curve
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Budimir Markovic <[email protected]>
[ Upstream commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f ]
HFSC assumes that inner classes have an fsc curve, but it is currently possible for classes without an fsc curve to become parents. This leads to bugs including a use-after-free.
Don't allow non-root classes without HFSC_FSC to become parents.
--- net/sched/sch_hfsc.c | 4 ++++ 1 file changed, 4 insertions(+)
net/sched/sch_hfsc.c +4 -0
@@ -1012,6 +1012,10 @@ hfsc_change_class(struct Qdisc *sch, u32 classid, u32 parentid,if (parent ==NULL )return -ENOENT ; } +if (!(parent->cl_flags &HFSC_FSC ) && parent != &q->root) { +NL_SET_ERR_MSG (extack,"Invalid parent - parent class must have FSC" ); +return -EINVAL ; + }if (classid ==0 ||TC_H_MAJ (classid ^ sch->handle) !=0 )return -EINVAL ;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 121/406 netrom: Deny concurrent connect().
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kuniyuki Iwashima <[email protected]>
[ Upstream commit c2f8fd7949603efb03908e05abbf7726748c8de3 ]
syzkaller reported null-ptr-deref [0] related to AF_NETROM. This is another self-accept issue from the strace log. [1]
syz-executor creates an AF_NETROM socket and calls connect(), which is blocked at that time. Then, sk->sk_state is TCP_SYN_SENT and sock->state is SS_CONNECTING.
[pid 5059] socket(AF_NETROM, SOCK_SEQPACKET, 0) = 4
[pid 5059] connect(4, {sa_family=AF_NETROM, sa_data="..." <unfinished ...>
Another thread calls connect() concurrently, which finally fails with -EINVAL. However, the problem here is the socket state is reset even while the first connect() is blocked.
[pid 5060] connect(4, NULL, 0 <unfinished ...>
[pid 5060] <... connect resumed>) = -1 EINVAL (Invalid argument)
As sk->state is TCP_CLOSE and sock->state is SS_UNCONNECTED, the following listen() succeeds. Then, the first connect() looks up itself as a listener and puts skb into the queue with skb->sk itself. As a result, the next accept() gets another FD of itself as 3, and the first connect() finishes.
[pid 5060] listen(4, 0 <unfinished ...> [pid 5060] <... listen resumed>) = 0 [pid 5060] accept(4, NULL, NULL <unfinished ...> [pid 5060] <... accept resumed>) = 3 [pid 5059] <... connect resumed>) = 0
Then, accept4() is called but blocked, which causes the general protection fault later.
[pid 5059] accept4(4, NULL, 0x20000400, SOCK_NONBLOCK <unfinished ...>
After that, another self-accept occurs by accept() and writev().
[pid 5060] accept(4, NULL, NULL <unfinished ...>
[pid 5061] writev(3, [{iov_base=...}] <unfinished ...>
[pid 5061] <... writev resumed>) = 99
[pid 5060] <... accept resumed>) = 6Finally, the leader thread close()s all FDs. Since the three FDs reference the same socket, nr_release() does the cleanup for it three times, and the remaining accept4() causes the following fault.
[pid 5058] close(3) = 0 [pid 5058] close(4) = 0 [pid 5058] close(5) = -1 EBADF (Bad file descriptor) [pid 5058] close(6) = 0 [pid 5058] <... exit_group resumed>) = ? [ 83.456055][ T5059] general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
To avoid the issue, we need to return an error for connect() if another connect() is in progress, as done in __inet_stream_connect().
[0]:
general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 0 PID: 5059 Comm: syz-executor.0 Not tainted 6.5.0-rc5-syzkaller-00194-gace0ab3a4b54 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 RIP: 0010:__lock_acquire+0x109/0x5de0 kernel/locking/lockdep.c:5012 Code: 45 85 c9 0f 84 cc 0e 00 00 44 8b 05 11 6e 23 0b 45 85 c0 0f 84 be 0d 00 00 48 ba 00 00 00 00 00 fc ff df 4c 89 d1 48 c1 e9 03 <80> 3c 11 00 0f 85 e8 40 00 00 49 81 3a a0 69 48 90 0f 84 96 0d 00 RSP: 0018:ffffc90003d6f9e0 EFLAGS: 00010006 RAX: ffff8880244c8000 RBX: 1ffff920007adf6c RCX: 0000000000000003 RDX: dffffc0000000000 RSI: 0000000000000000 RDI: 0000000000000018 RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000018 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f51d519a6c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f51d5158d58 CR3: 000000002943f000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> lock_acquire kernel/locking/lockdep.c:5761 [inline] lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5726 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x3a/0x50 kernel/locking/spinlock.c:162 prepare_to_wait+0x47/0x380 kernel/sched/wait.c:269 nr_accept+0x20d/0x650 net/netrom/af_netrom.c:798 do_accept+0x3a6/0x570 net/socket.c:1872 __sys_accept4_file net/socket.c:1913 [inline] __sys_accept4+0x99/0x120 net/socket.c:1943 __do_sys_accept4 net/socket.c:1954 [inline] __se_sys_accept4 net/socket.c:1951 [inline] __x64_sys_accept4+0x96/0x100 net/socket.c:1951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f51d447cae9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f51d519a0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000120 RAX: ffffffffffffffda RBX: 00007f51d459bf80 RCX: 00007f51d447cae9 RDX: 0000000020000400 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 00007f51d44c847a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000800 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f51d459bf80 R15: 00007ffc25c34e48 </TASK>
--- net/netrom/af_netrom.c | 5 +++++ 1 file changed, 5 insertions(+)
net/netrom/af_netrom.c +5 -0
@@ -660,6 +660,11 @@ static int nr_connect(struct socket *sock, struct sockaddr *uaddr, goto out_release; } +if (sock->state ==SS_CONNECTING ) { + err = -EALREADY ; + goto out_release; + } + sk->sk_state =TCP_CLOSE ; sock->state =SS_UNCONNECTED ;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 122/406 drm/bridge: tc358764: Fix debug print parameter order
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marek Vasut <[email protected]>
[ Upstream commit 7f947be02aab5b154427cb5b0fffe858fc387b02 ]
The debug print parameters were swapped in the output and they were printed as decimal values, both the hardware address and the value. Update the debug print to print the parameters in correct order, and use hexadecimal print for both address and value.
--- drivers/gpu/drm/bridge/tc358764.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/bridge/tc358764.c +1 -1
@@ -180,7 +180,7 @@ static void tc358764_read(struct tc358764 *ctx, u16 addr, u32 *val)if (ret >=0 )le32_to_cpus (val); -dev_dbg (ctx->dev,"read: %d, addr: %d\n" , addr, *val); +dev_dbg (ctx->dev,"read: addr=0x%04x data=0x%08x\n" , addr, *val); }static void tc358764_write (struct tc358764 *ctx,u16 addr,u32 val)
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 123/406 quota: factor out dquot_write_dquot()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baokun Li <[email protected]>
[ Upstream commit 024128477809f8073d870307c8157b8826ebfd08 ]
Refactor out dquot_write_dquot() to reduce duplicate code.
Message-Id: <[email protected]>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
--- fs/quota/dquot.c | 39 ++++++++++++++++----------------------- 1 file changed, 16 insertions(+), 23 deletions(-)
fs/quota/dquot.c +16 -23
@@ -630,6 +630,18 @@ int dquot_scan_active(struct super_block *sb, }EXPORT_SYMBOL (dquot_scan_active); +static inline int dquot_write_dquot (struct dquot *dquot) +{ +int ret = dquot->dq_sb->dq_op->write_dquot (dquot); +if (ret <0 ) { +quota_error (dquot->dq_sb,"Can't write quota structure " +"(error %d). Quota may get out of sync!" , ret); +/* Clear dirty bit anyway to avoid infinite loop. */ +clear_dquot_dirty (dquot); + } +return ret; +} +/* Write all dquot structures to quota files */ int dquot_writeback_dquots (struct super_block *sb,int type) {
@@ -660,16 +672,9 @@ int dquot_writeback_dquots(struct super_block *sb, int type)* use count */ dqgrab (dquot);spin_unlock (&dq_list_lock); - err = sb->dq_op->write_dquot (dquot); -if (err) { -/* -* Clear dirty bit anyway to avoid infinite -* loop here. -*/ -clear_dquot_dirty (dquot); -if (!ret) - ret = err; - } + err =dquot_write_dquot (dquot); +if (err && !ret) + ret = err;dqput (dquot);spin_lock (&dq_list_lock); }
@@ -767,8 +772,6 @@ static struct shrinker dqcache_shrinker = {*/ void dqput (struct dquot *dquot) { -int ret; -if (!dquot)return ;#ifdef CONFIG_QUOTA_DEBUG
@@ -796,17 +799,7 @@ void dqput(struct dquot *dquot)if (dquot_dirty (dquot)) {spin_unlock (&dq_list_lock);/* Commit dquot before releasing */ - ret = dquot->dq_sb->dq_op->write_dquot (dquot); -if (ret <0 ) { -quota_error (dquot->dq_sb,"Can't write quota structure" -" (error %d). Quota may get out of sync!" , - ret); -/* -* We clear dirty bit anyway, so that we avoid -* infinite loop here -*/ -clear_dquot_dirty (dquot); - } +dquot_write_dquot (dquot); goto we_slept; }if (test_bit (DQ_ACTIVE_B , &dquot->dq_flags)) {
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 124/406 quota: rename dquot_active() to inode_quota_active()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baokun Li <[email protected]>
[ Upstream commit 4b9bdfa16535de8f49bf954aeed0f525ee2fc322 ]
Now we have a helper function dquot_dirty() to determine if dquot has DQ_MOD_B bit. dquot_active() can easily be misunderstood as a helper function to determine if dquot has DQ_ACTIVE_B bit. So we avoid this by renaming it to inode_quota_active() and later on we will add the helper function dquot_active() to determine if dquot has DQ_ACTIVE_B bit.
Message-Id: <[email protected]>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
--- fs/quota/dquot.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
fs/quota/dquot.c +10 -10
@@ -1420,7 +1420,7 @@ static int info_bdq_free(struct dquot *dquot, qsize_t space)return QUOTA_NL_NOWARN ; } -static int dquot_active (const struct inode *inode) +static int inode_quota_active (const struct inode *inode) {struct super_block *sb = inode->i_sb;
@@ -1443,7 +1443,7 @@ static int __dquot_initialize(struct inode *inode, int type)qsize_t rsv;int ret =0 ; -if (!dquot_active (inode)) +if (!inode_quota_active (inode))return 0 ; dquots =i_dquot (inode);
@@ -1551,7 +1551,7 @@ bool dquot_initialize_needed(struct inode *inode)struct dquot **dquots;int i; -if (!dquot_active (inode)) +if (!inode_quota_active (inode))return false; dquots =i_dquot (inode);
@@ -1662,7 +1662,7 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)int reserve = flags &DQUOT_SPACE_RESERVE ;struct dquot **dquots; -if (!dquot_active (inode)) { +if (!inode_quota_active (inode)) {if (reserve) {spin_lock (&inode->i_lock); *inode_reserved_space (inode) += number;
@@ -1732,7 +1732,7 @@ int dquot_alloc_inode(struct inode *inode)struct dquot_warn warn[MAXQUOTAS ];struct dquot *const *dquots; -if (!dquot_active (inode)) +if (!inode_quota_active (inode))return 0 ;for (cnt =0 ; cnt <MAXQUOTAS ; cnt++) warn[cnt].w_type =QUOTA_NL_NOWARN ;
@@ -1775,7 +1775,7 @@ int dquot_claim_space_nodirty(struct inode *inode, qsize_t number)struct dquot **dquots;int cnt, index; -if (!dquot_active (inode)) { +if (!inode_quota_active (inode)) {spin_lock (&inode->i_lock); *inode_reserved_space (inode) -= number;__inode_add_bytes (inode, number);
@@ -1817,7 +1817,7 @@ void dquot_reclaim_space_nodirty(struct inode *inode, qsize_t number)struct dquot **dquots;int cnt, index; -if (!dquot_active (inode)) { +if (!inode_quota_active (inode)) {spin_lock (&inode->i_lock); *inode_reserved_space (inode) += number;__inode_sub_bytes (inode, number);
@@ -1861,7 +1861,7 @@ void __dquot_free_space(struct inode *inode, qsize_t number, int flags)struct dquot **dquots;int reserve = flags &DQUOT_SPACE_RESERVE , index; -if (!dquot_active (inode)) { +if (!inode_quota_active (inode)) {if (reserve) {spin_lock (&inode->i_lock); *inode_reserved_space (inode) -= number;
@@ -1916,7 +1916,7 @@ void dquot_free_inode(struct inode *inode)struct dquot *const *dquots;int index; -if (!dquot_active (inode)) +if (!inode_quota_active (inode))return ; dquots =i_dquot (inode);
@@ -2087,7 +2087,7 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr)struct super_block *sb = inode->i_sb;int ret; -if (!dquot_active (inode)) +if (!inode_quota_active (inode))return 0 ;if (iattr->ia_valid &ATTR_UID && !uid_eq (iattr->ia_uid, inode->i_uid)){
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 125/406 quota: add new helper dquot_active()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baokun Li <[email protected]>
[ Upstream commit 33bcfafc48cb186bc4bbcea247feaa396594229e ]
Add new helper function dquot_active() to make the code more concise.
Message-Id: <[email protected]>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
--- fs/quota/dquot.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-)
fs/quota/dquot.c +14 -9
@@ -338,6 +338,11 @@ static void wait_on_dquot(struct dquot *dquot)mutex_unlock (&dquot->dq_lock); } +static inline int dquot_active (struct dquot *dquot) +{ +return test_bit (DQ_ACTIVE_B , &dquot->dq_flags); +} +static inline int dquot_dirty (struct dquot *dquot) {return test_bit (DQ_MOD_B , &dquot->dq_flags);
@@ -353,14 +358,14 @@ int dquot_mark_dquot_dirty(struct dquot *dquot) {int ret =1 ; -if (!test_bit (DQ_ACTIVE_B , &dquot->dq_flags)) +if (!dquot_active (dquot))return 0 ;if (sb_dqopt (dquot->dq_sb)->flags &DQUOT_NOLIST_DIRTY )return test_and_set_bit (DQ_MOD_B , &dquot->dq_flags);/* If quota is dirty already, we don't have to acquire dq_list_lock */ -if (test_bit (DQ_MOD_B , &dquot->dq_flags)) +if (dquot_dirty (dquot))return 1 ;spin_lock (&dq_list_lock);
@@ -442,7 +447,7 @@ int dquot_acquire(struct dquot *dquot)smp_mb__before_atomic ();set_bit (DQ_READ_B , &dquot->dq_flags);/* Instantiate dquot if needed */ -if (!test_bit (DQ_ACTIVE_B , &dquot->dq_flags) && !dquot->dq_off) { +if (!dquot_active (dquot) && !dquot->dq_off) { ret = dqopt->ops[dquot->dq_id.type]->commit_dqblk (dquot);/* Write the info if needed */ if (info_dirty (&dqopt->info[dquot->dq_id.type])) {
@@ -484,7 +489,7 @@ int dquot_commit(struct dquot *dquot) goto out_lock;/* Inactive dquot can be only if there was error during read/init * => we have better not writing it */ -if (test_bit (DQ_ACTIVE_B , &dquot->dq_flags)) +if (dquot_active (dquot)) ret = dqopt->ops[dquot->dq_id.type]->commit_dqblk (dquot);else ret = -EIO ;
@@ -599,7 +604,7 @@ int dquot_scan_active(struct super_block *sb,spin_lock (&dq_list_lock);list_for_each_entry (dquot, &inuse_list, dq_inuse) { -if (!test_bit (DQ_ACTIVE_B , &dquot->dq_flags)) +if (!dquot_active (dquot))continue ;if (dquot->dq_sb != sb)continue ;
@@ -614,7 +619,7 @@ int dquot_scan_active(struct super_block *sb,* outstanding call and recheck the DQ_ACTIVE_B after that. */ wait_on_dquot (dquot); -if (test_bit (DQ_ACTIVE_B , &dquot->dq_flags)) { +if (dquot_active (dquot)) { ret =fn (dquot, priv);if (ret <0 ) goto out;
@@ -665,7 +670,7 @@ int dquot_writeback_dquots(struct super_block *sb, int type) dquot = list_first_entry(&dirty, struct dquot, dq_dirty); -WARN_ON (!test_bit (DQ_ACTIVE_B , &dquot->dq_flags)); +WARN_ON (!dquot_active (dquot));/* Now we have active dquot from which someone is * holding reference so we can safely just increase
@@ -802,7 +807,7 @@ void dqput(struct dquot *dquot)dquot_write_dquot (dquot); goto we_slept; } -if (test_bit (DQ_ACTIVE_B , &dquot->dq_flags)) { +if (dquot_active (dquot)) {spin_unlock (&dq_list_lock); dquot->dq_sb->dq_op->release_dquot (dquot); goto we_slept;
@@ -903,7 +908,7 @@ struct dquot *dqget(struct super_block *sb, struct kqid qid)* already finished or it will be canceled due to dq_count > 1 test */ wait_on_dquot (dquot);/* Read the dquot / allocate space in quota file */ -if (!test_bit (DQ_ACTIVE_B , &dquot->dq_flags)) { +if (!dquot_active (dquot)) {int err; err = sb->dq_op->acquire_dquot (dquot);
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 126/406 quota: fix dqput() to follow the guarantees dquot_srcu should provide
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baokun Li <[email protected]>
[ Upstream commit dabc8b20756601b9e1cc85a81d47d3f98ed4d13a ]
The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below:
cpu1 cpu2
_________________|_________________wb_do_writeback CHOWN(1)
...
ext4_da_update_reserve_space
dquot_claim_block
...
dquot_mark_dquot_dirty // try to dirty old quota
test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE
if (test_bit(DQ_MOD_B, &dquot->dq_flags))
// test no dirty, wait dq_list_lock
...
dquot_transfer
__dquot_transfer
dqput_all(transfer_from) // rls old dquot
dqput // last dqput
dquot_release
clear_bit(DQ_ACTIVE_B, &dquot->dq_flags)
atomic_dec(&dquot->dq_count)
put_dquot_last(dquot)
list_add_tail(&dquot->dq_free, &free_dquots)
// add the dquot to free_dquots
if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags))
add dqi_dirty_list // add released dquot to dirty_listThis can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice.
As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots.
Message-Id: <[email protected]>
--- fs/quota/dquot.c | 96 +++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 78 insertions(+), 18 deletions(-)
fs/quota/dquot.c +78 -18
@@ -225,13 +225,22 @@ static void put_quota_format(struct quota_format_type *fmt)/* * Dquot List Management: -* The quota code uses four lists for dquot management: the inuse_list, -* free_dquots, dqi_dirty_list, and dquot_hash[] array. A single dquot -* structure may be on some of those lists, depending on its current state. +* The quota code uses five lists for dquot management: the inuse_list, +* releasing_dquots, free_dquots, dqi_dirty_list, and dquot_hash[] array. +* A single dquot structure may be on some of those lists, depending on +* its current state. * * All dquots are placed to the end of inuse_list when first created, and this * list is used for invalidate operation, which must look at every dquot. * +* When the last reference of a dquot will be dropped, the dquot will be +* added to releasing_dquots. We'd then queue work item which would call +* synchronize_srcu() and after that perform the final cleanup of all the +* dquots on the list. Both releasing_dquots and free_dquots use the +* dq_free list_head in the dquot struct. When a dquot is removed from +* releasing_dquots, a reference count is always subtracted, and if +* dq_count == 0 at that point, the dquot will be added to the free_dquots. +* * Unused dquots (dq_count == 0) are added to the free_dquots list when freed, * and this list is searched whenever we need an available dquot. Dquots are * removed from the list as soon as they are used again, and
@@ -250,6 +259,7 @@ static void put_quota_format(struct quota_format_type *fmt)static LIST_HEAD (inuse_list);static LIST_HEAD (free_dquots); +static LIST_HEAD (releasing_dquots);static unsigned int dq_hash_bits, dq_hash_mask;static struct hlist_head *dquot_hash;
@@ -260,6 +270,9 @@ static qsize_t inode_get_rsv_space(struct inode *inode);static qsize_t __inode_get_rsv_space (struct inode *inode);static int __dquot_initialize (struct inode *inode,int type); +static void quota_release_workfn (struct work_struct *work); +static DECLARE_DELAYED_WORK(quota_release_work, quota_release_workfn); +static inline unsigned int hashfn (const struct super_block *sb,struct kqid qid) {
@@ -307,12 +320,18 @@ static inline void put_dquot_last(struct dquot *dquot)dqstats_inc (DQST_FREE_DQUOTS ); } +static inline void put_releasing_dquots (struct dquot *dquot) +{ +list_add_tail (&dquot->dq_free, &releasing_dquots); +} +static inline void remove_free_dquot (struct dquot *dquot) {if (list_empty (&dquot->dq_free))return ;list_del_init (&dquot->dq_free); -dqstats_dec (DQST_FREE_DQUOTS ); +if (!atomic_read (&dquot->dq_count)) +dqstats_dec (DQST_FREE_DQUOTS ); }static inline void put_inuse (struct dquot *dquot)
@@ -554,6 +573,8 @@ static void invalidate_dquots(struct super_block *sb, int type)struct dquot *dquot, *tmp; restart: +flush_delayed_work ("a_release_work); +spin_lock (&dq_list_lock);list_for_each_entry_safe (dquot, tmp, &inuse_list, dq_inuse) {if (dquot->dq_sb != sb)
@@ -562,6 +583,12 @@ static void invalidate_dquots(struct super_block *sb, int type)continue ;/* Wait for dquot users */ if (atomic_read (&dquot->dq_count)) { +/* dquot in releasing_dquots, flush and retry */ +if (!list_empty (&dquot->dq_free)) { +spin_unlock (&dq_list_lock); + goto restart; + } +atomic_inc (&dquot->dq_count);spin_unlock (&dq_list_lock);/*
@@ -772,6 +799,49 @@ static struct shrinker dqcache_shrinker = { .seeks = DEFAULT_SEEKS, }; +/* +* Safely release dquot and put reference to dquot. +*/ +static void quota_release_workfn (struct work_struct *work) +{ +struct dquot *dquot; +struct list_head rls_head; + +spin_lock (&dq_list_lock); +/* Exchange the list head to avoid livelock. */ +list_replace_init (&releasing_dquots, &rls_head); +spin_unlock (&dq_list_lock); + +restart: +synchronize_srcu (&dquot_srcu); +spin_lock (&dq_list_lock); +while (!list_empty (&rls_head)) { + dquot = list_first_entry(&rls_head, struct dquot, dq_free); +/* Dquot got used again? */ +if (atomic_read (&dquot->dq_count) >1 ) { +remove_free_dquot (dquot); +atomic_dec (&dquot->dq_count); +continue ; + } +if (dquot_dirty (dquot)) { +spin_unlock (&dq_list_lock); +/* Commit dquot before releasing */ +dquot_write_dquot (dquot); + goto restart; + } +if (dquot_active (dquot)) { +spin_unlock (&dq_list_lock); + dquot->dq_sb->dq_op->release_dquot (dquot); + goto restart; + } +/* Dquot is inactive and clean, now move it to free list */ +remove_free_dquot (dquot); +atomic_dec (&dquot->dq_count); +put_dquot_last (dquot); + } +spin_unlock (&dq_list_lock); +} +/* * Put reference to dquot */
@@ -788,7 +858,7 @@ void dqput(struct dquot *dquot) }#endif dqstats_inc (DQST_DROPS ); -we_slept: +spin_lock (&dq_list_lock);if (atomic_read (&dquot->dq_count) >1 ) {/* We have more than one user... nothing to do */
@@ -800,25 +870,15 @@ void dqput(struct dquot *dquot)spin_unlock (&dq_list_lock);return ; } +/* Need to release dquot? */ -if (dquot_dirty (dquot)) { -spin_unlock (&dq_list_lock); -/* Commit dquot before releasing */ -dquot_write_dquot (dquot); - goto we_slept; - } -if (dquot_active (dquot)) { -spin_unlock (&dq_list_lock); - dquot->dq_sb->dq_op->release_dquot (dquot); - goto we_slept; - } -atomic_dec (&dquot->dq_count);#ifdef CONFIG_QUOTA_DEBUG /* sanity check */ BUG_ON (!list_empty (&dquot->dq_free));#endif -put_dquot_last (dquot); +put_releasing_dquots (dquot);spin_unlock (&dq_list_lock); +queue_delayed_work (system_unbound_wq, "a_release_work,1 ); }EXPORT_SYMBOL (dqput);
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 127/406 ASoC: stac9766: fix build errors with REGMAP_AC97
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Randy Dunlap <[email protected]>
[ Upstream commit c70064b96f509daa78f57992aeabcf274fb2fed4 ]
Select REGMAP_AC97 to fix these build errors:
ERROR: modpost: "regmap_ac97_default_volatile" [sound/soc/codecs/snd-soc-stac9766.ko] undefined!
ERROR: modpost: "__regmap_init_ac97" [sound/soc/codecs/snd-soc-stac9766.ko] undefined!
--- sound/soc/codecs/Kconfig | 1 + 1 file changed, 1 insertion(+)
sound/soc/codecs/Kconfig +1 -0
@@ -1295,6 +1295,7 @@ config SND_SOC_STA529 config SND_SOC_STAC9766 tristate depends on SND_SOC_AC97_BUS + select REGMAP_AC97 config SND_SOC_STI_SAS tristate "codec Audio support for STI SAS codec"
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 110/406 samples/bpf: fix broken map lookup probe
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel T. Lee <[email protected]>
[ Upstream commit d93a7cf6ca2cfcd7de5d06f753ce8d5e863316ac ]
In the commit 7c4cd051add3 ("bpf: Fix syscall's stackmap lookup potential deadlock"), a potential deadlock issue was addressed, which resulted in *_map_lookup_elem not triggering BPF programs. (prior to lookup, bpf_disable_instrumentation() is used)
To resolve the broken map lookup probe using "htab_map_lookup_elem", this commit introduces an alternative approach. Instead, it utilize "bpf_map_copy_value" and apply a filter specifically for the hash table with map_type.
--- samples/bpf/tracex6_kern.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-)
samples/bpf/tracex6_kern.c +15 -2
@@ -2,6 +2,8 @@#include <linux/version.h> #include <uapi/linux/bpf.h> #include <bpf/bpf_helpers.h> +#include <bpf/bpf_tracing.h> +#include <bpf/bpf_core_read.h> struct { __uint(type, BPF_MAP_TYPE_PERF_EVENT_ARRAY);
@@ -45,13 +47,24 @@ int bpf_prog1(struct pt_regs *ctx)return 0 ; } -SEC("kprobe/htab_map_lookup_elem") -int bpf_prog2 (struct pt_regs *ctx) +/* +* Since *_map_lookup_elem can't be expected to trigger bpf programs +* due to potential deadlocks (bpf_disable_instrumentation), this bpf +* program will be attached to bpf_map_copy_value (which is called +* from map_lookup_elem) and will only filter the hashtable type. +*/ +SEC("kprobe/bpf_map_copy_value") +int BPF_KPROBE (bpf_prog2 ,struct bpf_map *map) {u32 key =bpf_get_smp_processor_id ();struct bpf_perf_event_value *val, buf; +enum bpf_map_type type;int error; + type =BPF_CORE_READ (map, map_type); +if (type !=BPF_MAP_TYPE_HASH ) +return 0 ; + error =bpf_perf_event_read_value (&counters, key, &buf,sizeof (buf));if (error)return 0 ;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 128/406 soc: qcom: ocmem: Add OCMEM hardware version print
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Luca Weiss <[email protected]>
[ Upstream commit e81a16e77259294cd4ff0a9c1fbe5aa0e311a47d ]
It might be useful to know what hardware version of the OCMEM block the SoC contains. Add a debug print for that.
Stable-dep-of: a7b484b1c933 ("soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros")
--- drivers/soc/qcom/ocmem.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
drivers/soc/qcom/ocmem.c +10 -0
@@ -76,6 +76,10 @@ struct ocmem {#define OCMEM_REG_GFX_MPU_START 0x00001004#define OCMEM_REG_GFX_MPU_END 0x00001008 +#define OCMEM_HW_VERSION_MAJOR (val) FIELD_GET(GENMASK(31, 28), val) +#define OCMEM_HW_VERSION_MINOR (val) FIELD_GET(GENMASK(27, 16), val) +#define OCMEM_HW_VERSION_STEP (val) FIELD_GET(GENMASK(15, 0), val) +#define OCMEM_HW_PROFILE_NUM_PORTS (val) FIELD_PREP(0x0000000f, (val))#define OCMEM_HW_PROFILE_NUM_MACROS (val) FIELD_PREP(0x00003f00, (val))
@@ -357,6 +361,12 @@ static int ocmem_dev_probe(struct platform_device *pdev) } } + reg =ocmem_read (ocmem,OCMEM_REG_HW_VERSION ); +dev_dbg (dev,"OCMEM hardware version: %lu.%lu.%lu\n" , +OCMEM_HW_VERSION_MAJOR (reg), +OCMEM_HW_VERSION_MINOR (reg), +OCMEM_HW_VERSION_STEP (reg)); + reg =ocmem_read (ocmem,OCMEM_REG_HW_PROFILE ); ocmem->num_ports =OCMEM_HW_PROFILE_NUM_PORTS (reg); ocmem->num_macros =OCMEM_HW_PROFILE_NUM_MACROS (reg);
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 129/406 soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Luca Weiss <[email protected]>
[ Upstream commit a7b484b1c9332a1ee12e8799d62a11ee3f8e0801 ]
Since we're using these two macros to read a value from a register, we need to use the FIELD_GET instead of the FIELD_PREP macro, otherwise we're getting wrong values.
So instead of:
[ 3.111779] ocmem fdd00000.sram: 2 ports, 1 regions, 512 macros, not interleaved
we now get the correct value of:
[ 3.129672] ocmem fdd00000.sram: 2 ports, 1 regions, 2 macros, not interleaved
--- drivers/soc/qcom/ocmem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/soc/qcom/ocmem.c +2 -2
@@ -80,8 +80,8 @@ struct ocmem {#define OCMEM_HW_VERSION_MINOR (val) FIELD_GET(GENMASK(27, 16), val)#define OCMEM_HW_VERSION_STEP (val) FIELD_GET(GENMASK(15, 0), val) -#define OCMEM_HW_PROFILE_NUM_PORTS (val) FIELD_PREP(0x0000000f, (val)) -#define OCMEM_HW_PROFILE_NUM_MACROS (val) FIELD_PREP(0x00003f00, (val)) +#define OCMEM_HW_PROFILE_NUM_PORTS (val) FIELD_GET(0x0000000f, (val)) +#define OCMEM_HW_PROFILE_NUM_MACROS (val) FIELD_GET(0x00003f00, (val))#define OCMEM_HW_PROFILE_LAST_REGN_HALFSIZE 0x00010000#define OCMEM_HW_PROFILE_INTERLEAVING 0x00020000
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 130/406 arm64: dts: qcom: msm8996: Add missing interrupt to the USB2 controller
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Dybcio <[email protected]>
[ Upstream commit 36541089c4733355ed844c67eebd0c3936953454 ]
The interrupt line was previously not described. Take care of that.
--- arch/arm64/boot/dts/qcom/msm8996.dtsi | 3 +++ 1 file changed, 3 insertions(+)
arch/arm64/boot/dts/qcom/msm8996.dtsi +3 -0
@@ -1966,6 +1966,9 @@ usb2: usb@76f8800 { #size-cells = <1>; ranges; + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq"; + clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>, <&gcc GCC_USB20_MASTER_CLK>, <&gcc GCC_USB20_MOCK_UTMI_CLK>,
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 131/406 drm/amdgpu: avoid integer overflow warning in amdgpu_device_resize_fb_bar()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
[ Upstream commit 822130b5e8834ab30ad410cf19a582e5014b9a85 ]
On 32-bit architectures comparing a resource against a value larger than U32_MAX can cause a warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1344:18: error: result of comparison of constant 4294967296 with expression of type 'resource_size_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
res->start > 0x100000000ull)
~~~~~~~~~~ ^ ~~~~~~~~~~~~~~As gcc does not warn about this in dead code, add an IS_ENABLED() check at the start of the function. This will always return success but not actually resize the BAR on 32-bit architectures without high memory, which is exactly what we want here, as the driver can fall back to bank switching the VRAM access.
--- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +3 -0
@@ -1091,6 +1091,9 @@ int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)u16 cmd;int r; +if (!IS_ENABLED (CONFIG_PHYS_ADDR_T_64BIT )) +return 0 ; +/* Bypass for VF */ if (amdgpu_sriov_vf (adev))return 0 ;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 132/406 ARM: dts: BCM5301X: Harmonize EHCI/OHCI DT nodes name
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Serge Semin <[email protected]>
[ Upstream commit 74abbfe99f43eb7466d26d9e48fbeb46b8f3d804 ]
In accordance with the Generic EHCI/OHCI bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible nodes are correctly named.
Stable-dep-of: 05d2c3d552b8 ("ARM: dts: BCM53573: Drop nonexistent #usb-cells")
--- arch/arm/boot/dts/bcm5301x.dtsi | 4 ++-- arch/arm/boot/dts/bcm53573.dtsi | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
arch/arm/boot/dts/bcm5301x.dtsi +2 -2
@@ -267,7 +267,7 @@ usb2: usb2@21000 { interrupt-parent = <&gic>; - ehci: ehci@21000 { + ehci: usb@21000 { #usb-cells = <0>; compatible = "generic-ehci";
@@ -289,7 +289,7 @@ ehci_port2: port@2 { }; }; - ohci: ohci@22000 { + ohci: usb@22000 { #usb-cells = <0>; compatible = "generic-ohci";
arch/arm/boot/dts/bcm53573.dtsi +2 -2
@@ -135,7 +135,7 @@ usb2: usb2@4000 { #address-cells = <1>; #size-cells = <1>; - ehci: ehci@4000 { + ehci: usb@4000 { compatible = "generic-ehci"; reg = <0x4000 0x1000>; interrupt-parent = <&gic>;
@@ -155,7 +155,7 @@ ehci_port2: port@2 { }; }; - ohci: ohci@d000 { + ohci: usb@d000 { #usb-cells = <0>; compatible = "generic-ohci";
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 133/406 ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rafał Miłecki <[email protected]>
[ Upstream commit 9fb90ae6cae7f8fe4fbf626945f32cd9da2c3892 ]
BCM53573 family SoC have Ethernet switch connected to the first Ethernet controller (accessible over MDIO).
Stable-dep-of: 05d2c3d552b8 ("ARM: dts: BCM53573: Drop nonexistent #usb-cells")
--- arch/arm/boot/dts/bcm53573.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
arch/arm/boot/dts/bcm53573.dtsi +18 -0
@@ -180,6 +180,24 @@ ohci_port2: port@2 { gmac0: ethernet@5000 { reg = <0x5000 0x1000>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch: switch@1e { + compatible = "brcm,bcm53125"; + reg = <0x1e>; + + status = "disabled"; + + /* ports are defined in board DTS */ + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; }; gmac1: ethernet@b000 {
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 134/406 ARM: dts: BCM53573: Drop nonexistent #usb-cells
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rafał Miłecki <[email protected]>
[ Upstream commit 05d2c3d552b8c92fc397377d9d1112fc58e2cd59 ]
Such property simply doesn't exist (is not documented or used anywhere).
This fixes:arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: usb@d000: Unevaluated properties are not allowed ('#usb-cells' was unexpected)
From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
--- arch/arm/boot/dts/bcm53573.dtsi | 2 -- 1 file changed, 2 deletions(-)
arch/arm/boot/dts/bcm53573.dtsi +0 -2
@@ -156,8 +156,6 @@ ehci_port2: port@2 { }; ohci: usb@d000 { - #usb-cells = <0>; - compatible = "generic-ohci"; reg = <0xd000 0x1000>; interrupt-parent = <&gic>;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 135/406 ARM: dts: BCM53573: Add cells sizes to PCIe node
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rafał Miłecki <[email protected]>
[ Upstream commit 3392ef368d9b04622fe758b1079b512664b6110a ]
This fixes:arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: pcie@2000: '#address-cells' is a required property
From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yamlarch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: pcie@2000: '#size-cells' is a required property
From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
Two properties that need to be added later are "device_type" and "ranges". Adding "device_type" on its own causes a new warning and the value of "ranges" needs to be determined yet.
--- arch/arm/boot/dts/bcm53573.dtsi | 3 +++ 1 file changed, 3 insertions(+)
arch/arm/boot/dts/bcm53573.dtsi +3 -0
@@ -127,6 +127,9 @@ uart0: serial@300 { pcie0: pcie@2000 { reg = <0x00002000 0x1000>; + + #address-cells = <3>; + #size-cells = <2>; }; usb2: usb2@4000 {
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 111/406 wifi: ath9k: fix races between ath9k_wmi_cmd and ath9k_wmi_ctrl_rx
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fedor Pchelkin <[email protected]>
[ Upstream commit b674fb513e2e7a514fcde287c0f73915d393fdb6 ]
Currently, the synchronization between ath9k_wmi_cmd() and ath9k_wmi_ctrl_rx() is exposed to a race condition which, although being rather unlikely, can lead to invalid behaviour of ath9k_wmi_cmd().
Consider the following scenario:
CPU0 CPU1
ath9k_wmi_cmd(...)
mutex_lock(&wmi->op_mutex)
ath9k_wmi_cmd_issue(...)
wait_for_completion_timeout(...)
---
timeout
---
/* the callback is being processed * before last_seq_id became zero */ ath9k_wmi_ctrl_rx(...) spin_lock_irqsave(...) /* wmi->last_seq_id check here * doesn't detect timeout yet */ spin_unlock_irqrestore(...)
/* last_seq_id is zeroed to
* indicate there was a timeout
*/
wmi->last_seq_id = 0
mutex_unlock(&wmi->op_mutex)
return -ETIMEDOUT
ath9k_wmi_cmd(...)
mutex_lock(&wmi->op_mutex)
/* the buffer is replaced with
* another one
*/
wmi->cmd_rsp_buf = rsp_buf
wmi->cmd_rsp_len = rsp_len
ath9k_wmi_cmd_issue(...)
spin_lock_irqsave(...)
spin_unlock_irqrestore(...)
wait_for_completion_timeout(...)
/* the continuation of the
* callback left after the first
* ath9k_wmi_cmd call
*/
ath9k_wmi_rsp_callback(...)
/* copying data designated
* to already timeouted
* WMI command into an
* inappropriate wmi_cmd_buf
*/
memcpy(...)
complete(&wmi->cmd_wait) /* awakened by the bogus callback
* => invalid return result
*/
mutex_unlock(&wmi->op_mutex)
return 0
To fix this, update last_seq_id on timeout path inside ath9k_wmi_cmd() under the wmi_lock. Move ath9k_wmi_rsp_callback() under wmi_lock inside ath9k_wmi_ctrl_rx() so that the wmi->cmd_wait can be completed only for initially designated wmi_cmd call, otherwise the path would be rejected with last_seq_id check.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
--- drivers/net/wireless/ath/ath9k/wmi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/wireless/ath/ath9k/wmi.c +4 -2
@@ -242,10 +242,10 @@ static void ath9k_wmi_ctrl_rx(void *priv, struct sk_buff *skb,spin_unlock_irqrestore (&wmi->wmi_lock, flags); goto free_skb; } -spin_unlock_irqrestore (&wmi->wmi_lock, flags);/* WMI command response */ ath9k_wmi_rsp_callback (wmi, skb); +spin_unlock_irqrestore (&wmi->wmi_lock, flags); free_skb:kfree_skb (skb);
@@ -308,8 +308,8 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,struct ath_common *common =ath9k_hw_common (ah);u16 headroom =sizeof (struct htc_frame_hdr ) +sizeof (struct wmi_cmd_hdr ); +unsigned long time_left, flags;struct sk_buff *skb; -unsigned long time_left;int ret =0 ;if (ah->ah_flags &AH_UNPLUGGED )
@@ -345,7 +345,9 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,if (!time_left) {ath_dbg (common,WMI ,"Timeout waiting for WMI command: %s\n" ,wmi_cmd_to_name (cmd_id)); +spin_lock_irqsave (&wmi->wmi_lock, flags); wmi->last_seq_id =0 ; +spin_unlock_irqrestore (&wmi->wmi_lock, flags);mutex_unlock (&wmi->op_mutex);return -ETIMEDOUT ; }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 112/406 wifi: ath9k: protect WMI command response buffer replacement with a lock
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fedor Pchelkin <[email protected]>
[ Upstream commit 454994cfa9e4c18b6df9f78b60db8eadc20a6c25 ]
If ath9k_wmi_cmd() has exited with a timeout, it is possible that during next ath9k_wmi_cmd() call the wmi_rsp callback for previous wmi command writes to new wmi->cmd_rsp_buf and makes a completion. This results in an invalid ath9k_wmi_cmd() return value.
Move the replacement of WMI command response buffer and length under wmi_lock. Note that last_seq_id value is updated there, too.
Thus, the buffer cannot be written to by a belated wmi_rsp callback because that path is properly rejected by the last_seq_id check.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
--- drivers/net/wireless/ath/ath9k/wmi.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/net/wireless/ath/ath9k/wmi.c +8 -6
@@ -283,7 +283,8 @@ int ath9k_wmi_connect(struct htc_target *htc, struct wmi *wmi,static int ath9k_wmi_cmd_issue (struct wmi *wmi,struct sk_buff *skb, -enum wmi_cmd_id cmd,u16 len) +enum wmi_cmd_id cmd,u16 len, +u8 *rsp_buf,u32 rsp_len) {struct wmi_cmd_hdr *hdr;unsigned long flags;
@@ -293,6 +294,11 @@ static int ath9k_wmi_cmd_issue(struct wmi *wmi, hdr->seq_no =cpu_to_be16 (++wmi->tx_seq_id);spin_lock_irqsave (&wmi->wmi_lock, flags); + +/* record the rsp buffer and length */ + wmi->cmd_rsp_buf = rsp_buf; + wmi->cmd_rsp_len = rsp_len; + wmi->last_seq_id = wmi->tx_seq_id;spin_unlock_irqrestore (&wmi->wmi_lock, flags);
@@ -333,11 +339,7 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id, goto out; } -/* record the rsp buffer and length */ - wmi->cmd_rsp_buf = rsp_buf; - wmi->cmd_rsp_len = rsp_len; - - ret =ath9k_wmi_cmd_issue (wmi, skb, cmd_id, cmd_len); + ret =ath9k_wmi_cmd_issue (wmi, skb, cmd_id, cmd_len, rsp_buf, rsp_len);if (ret) goto out;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 113/406 wifi: mwifiex: avoid possible NULL skb pointer dereference
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Antipov <[email protected]>
[ Upstream commit 35a7a1ce7c7d61664ee54f5239a1f120ab95a87e ]
In 'mwifiex_handle_uap_rx_forward()', always check the value returned by 'skb_copy()' to avoid potential NULL pointer dereference in 'mwifiex_uap_queue_bridged_pkt()', and drop original skb in case of copying failure.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
--- drivers/net/wireless/marvell/mwifiex/uap_txrx.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/net/wireless/marvell/mwifiex/uap_txrx.c +9 -1
@@ -265,7 +265,15 @@ int mwifiex_handle_uap_rx_forward(struct mwifiex_private *priv,if (is_multicast_ether_addr (ra)) { skb_uap =skb_copy (skb,GFP_ATOMIC ); -mwifiex_uap_queue_bridged_pkt (priv, skb_uap); +if (likely (skb_uap)) { +mwifiex_uap_queue_bridged_pkt (priv, skb_uap); + }else { +mwifiex_dbg (adapter,ERROR , +"failed to copy skb for uAP\n" ); + priv->stats.rx_dropped++; +dev_kfree_skb_any (skb); +return -1 ; + } }else {if (mwifiex_get_sta_entry (priv, ra)) {/* Requeue Intra-BSS packet */
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 114/406 Bluetooth: btusb: Do not call kfree_skb() under spin_lock_irqsave()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jinjie Ruan <[email protected]>
[ Upstream commit 2a05334d7f91ff189692089c05fc48cc1d8204de ]
It is not allowed to call kfree_skb() from hardware interrupt context or with hardware interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile tested only.
--- drivers/bluetooth/btusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/bluetooth/btusb.c +1 -1
@@ -1689,7 +1689,7 @@ static int btusb_switch_alt_setting(struct hci_dev *hdev, int new_alts)* alternate setting. */ spin_lock_irqsave (&data->rxlock, flags); -kfree_skb (data->sco_skb); +dev_kfree_skb_irq (data->sco_skb); data->sco_skb =NULL ;spin_unlock_irqrestore (&data->rxlock, flags);
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 115/406 wifi: ath9k: use IS_ERR() with debugfs_create_dir()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wang Ming <[email protected]>
[ Upstream commit 1e4134610d93271535ecf900a676e1f094e9944c ]
The debugfs_create_dir() function returns error pointers, it never returns NULL. Most incorrect error checks were fixed, but the one in ath9k_htc_init_debug() was forgotten.
Fix the remaining error check.
--- drivers/net/wireless/ath/ath9k/htc_drv_debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ath/ath9k/htc_drv_debug.c +1 -1
@@ -491,7 +491,7 @@ int ath9k_htc_init_debug(struct ath_hw *ah) priv->debug.debugfs_phy =debugfs_create_dir (KBUILD_MODNAME , priv->hw->wiphy->debugfsdir); -if (!priv->debug.debugfs_phy) +if (IS_ERR (priv->debug.debugfs_phy))return -ENOMEM ;ath9k_cmn_spectral_init_debug (&priv->spec_priv, priv->debug.debugfs_phy);
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 116/406 net: arcnet: Do not call kfree_skb() under local_irq_disable()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jinjie Ruan <[email protected]>
[ Upstream commit 786c96e92fb9e854cb8b0cb7399bb2fb28e15c4b ]
It is not allowed to call kfree_skb() from hardware interrupt context or with hardware interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under local_irq_disable(). Compile tested only.
--- drivers/net/arcnet/arcnet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/arcnet/arcnet.c +1 -1
@@ -468,7 +468,7 @@ static void arcnet_reply_tasklet(unsigned long data) ret =sock_queue_err_skb (sk, ackskb);if (ret) -kfree_skb (ackskb); +dev_kfree_skb_irq (ackskb);local_irq_enable (); };
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 117/406 mlxsw: i2c: Fix chunk size setting in output mailbox buffer
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vadim Pasternak <[email protected]>
[ Upstream commit 146c7c330507c0384bf29d567186632bfe975927 ]
The driver reads commands output from the output mailbox. If the size of the output mailbox is not a multiple of the transaction / block size, then the driver will not issue enough read transactions to read the entire output, which can result in driver initialization errors.
Fix by determining the number of transactions using DIV_ROUND_UP().
--- drivers/net/ethernet/mellanox/mlxsw/i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlxsw/i2c.c +1 -1
@@ -428,7 +428,7 @@ mlxsw_i2c_cmd(struct device *dev, u16 opcode, u32 in_mod, size_t in_mbox_size, }else {/* No input mailbox is case of initialization query command. */ reg_size =MLXSW_I2C_MAX_DATA_SIZE ; - num = reg_size / mlxsw_i2c->block_size; + num =DIV_ROUND_UP (reg_size, mlxsw_i2c->block_size);if (mutex_lock_interruptible (&mlxsw_i2c->cmd.lock) <0 ) {dev_err (&client->dev,"Could not acquire lock" );
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 108/406 wifi: mwifiex: fix memory leak in mwifiex_histogram_read()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Antipov <[email protected]>
[ Upstream commit 9c8fd72a5c2a031cbc680a2990107ecd958ffcdb ]
Always free the zeroed page on return from 'mwifiex_histogram_read()'.
--- drivers/net/wireless/marvell/mwifiex/debugfs.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/net/wireless/marvell/mwifiex/debugfs.c +7 -2
@@ -265,8 +265,11 @@ mwifiex_histogram_read(struct file *file, char __user *ubuf,if (!p)return -ENOMEM ; -if (!priv || !priv->hist_data) -return -EFAULT ; +if (!priv || !priv->hist_data) { + ret = -EFAULT ; + goto free_and_exit; + } + phist_data = priv->hist_data; p += sprintf(p, "\n"
@@ -321,6 +324,8 @@ mwifiex_histogram_read(struct file *file, char __user *ubuf, ret =simple_read_from_buffer (ubuf, count, ppos, (char *)page, (unsigned long )p - page); +free_and_exit: +free_page (page);return ret; }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 137/406 drm/etnaviv: fix dumping of active MMU context
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lucas Stach <[email protected]>
[ Upstream commit 20faf2005ec85fa1a6acc9a74ff27de667f90576 ]
gpu->mmu_context is the MMU context of the last job in the HW queue, which isn't necessarily the same as the context from the bad job. Dump the MMU context from the scheduler determined bad submit to make it work as intended.
--- drivers/gpu/drm/etnaviv/etnaviv_dump.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/etnaviv/etnaviv_dump.c +7 -7
@@ -125,9 +125,9 @@ void etnaviv_core_dump(struct etnaviv_gem_submit *submit)return ; etnaviv_dump_core = false; -mutex_lock (&gpu->mmu_context->lock); +mutex_lock (&submit->mmu_context->lock); - mmu_size =etnaviv_iommu_dump_size (gpu->mmu_context); + mmu_size =etnaviv_iommu_dump_size (submit->mmu_context);/* We always dump registers, mmu, ring, hanging cmdbuf and end marker */ n_obj =5 ;
@@ -157,7 +157,7 @@ void etnaviv_core_dump(struct etnaviv_gem_submit *submit) iter.start =__vmalloc (file_size,GFP_KERNEL | __GFP_NOWARN | __GFP_NORETRY);if (!iter.start) { -mutex_unlock (&gpu->mmu_context->lock); +mutex_unlock (&submit->mmu_context->lock);dev_warn (gpu->dev,"failed to allocate devcoredump file\n" );return ; }
@@ -169,18 +169,18 @@ void etnaviv_core_dump(struct etnaviv_gem_submit *submit)memset (iter.hdr,0 , iter.data - iter.start);etnaviv_core_dump_registers (&iter, gpu); -etnaviv_core_dump_mmu (&iter, gpu->mmu_context, mmu_size); +etnaviv_core_dump_mmu (&iter, submit->mmu_context, mmu_size);etnaviv_core_dump_mem (&iter,ETDUMP_BUF_RING , gpu->buffer.vaddr, gpu->buffer.size,etnaviv_cmdbuf_get_va (&gpu->buffer, - &gpu->mmu_context->cmdbuf_mapping)); + &submit->mmu_context->cmdbuf_mapping));etnaviv_core_dump_mem (&iter,ETDUMP_BUF_CMD , submit->cmdbuf.vaddr, submit->cmdbuf.size,etnaviv_cmdbuf_get_va (&submit->cmdbuf, - &gpu->mmu_context->cmdbuf_mapping)); + &submit->mmu_context->cmdbuf_mapping)); -mutex_unlock (&gpu->mmu_context->lock); +mutex_unlock (&submit->mmu_context->lock);/* Reserve space for the bomap */ if (n_bomap_pages) {
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 146/406 arm64: dts: qcom: sdm845: Add missing RPMh power domain to GCC
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Manivannan Sadhasivam <[email protected]>
[ Upstream commit 4b6ea15c0a1122422b44bf6c47a3c22fc8d46777 ]
GCC and it's GDSCs are under the RPMh CX power domain. So let's add the missing RPMh power domain to the GCC node.
--- arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 + 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/qcom/sdm845.dtsi +1 -0
@@ -1064,6 +1064,7 @@ gcc: clock-controller@100000 { #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; + power-domains = <&rpmhpd SDM845_CX>; }; qfprom@784000 {
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 147/406 arm64: dts: qcom: sdm845: Fix the min frequency of "ice_core_clk"
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Manivannan Sadhasivam <[email protected]>
[ Upstream commit bbbef6e24bc4493602df68b052f6f48d48e3184a ]
Minimum frequency of the "ice_core_clk" should be 75MHz as specified in the downstream vendor devicetree. So fix it!
--- arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/sdm845.dtsi +1 -1
@@ -2109,7 +2109,7 @@ ufs_mem_hc: ufshc@1d84000 { <0 0>, <0 0>, <0 0>, - <0 300000000>; + <75000000 300000000>; status = "disabled"; };
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 148/406 drm/amdgpu: Update min() to min_t() in amdgpu_info_ioctl
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Srinivasan Shanmugam <[email protected]>
[ Upstream commit a0cc8e1512ad72c9f97cdcb76d42715730adaf62 ]
Fixes the following:
WARNING: min() should probably be min_t(size_t, size, sizeof(ip))
+ ret = copy_to_user(out, &ip, min((size_t)size, sizeof(ip)));
And other style fixes:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Missing a blank line after declarations
--- drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +8 -6
@@ -505,6 +505,7 @@ static int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file crtc = (struct drm_crtc *)minfo->crtcs[i];if (crtc && crtc->base.id == info->mode_crtc.id) {struct amdgpu_crtc *amdgpu_crtc =to_amdgpu_crtc (crtc); + ui32 = amdgpu_crtc->crtc_id; found =1 ;break ;
@@ -523,7 +524,7 @@ static int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_fileif (ret)return ret; - ret =copy_to_user (out, &ip,min ((size_t )size,sizeof (ip))); + ret =copy_to_user (out, &ip,min_t (size_t, size,sizeof (ip)));return ret ? -EFAULT :0 ; }case AMDGPU_INFO_HW_IP_COUNT : {
@@ -671,17 +672,18 @@ static int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file ? -EFAULT :0 ; }case AMDGPU_INFO_READ_MMR_REG : { -unsigned n, alloc_size; +unsigned int n, alloc_size;uint32_t *regs; -unsigned se_num = (info->read_mmr_reg.instance >> +unsigned int se_num = (info->read_mmr_reg.instance >>AMDGPU_INFO_MMR_SE_INDEX_SHIFT ) &AMDGPU_INFO_MMR_SE_INDEX_MASK ; -unsigned sh_num = (info->read_mmr_reg.instance >> +unsigned int sh_num = (info->read_mmr_reg.instance >>AMDGPU_INFO_MMR_SH_INDEX_SHIFT ) &AMDGPU_INFO_MMR_SH_INDEX_MASK ;/* set full masks if the userspace set all bits -* in the bitfields */ +* in the bitfields +*/ if (se_num ==AMDGPU_INFO_MMR_SE_INDEX_MASK ) se_num =0xffffffff ;else if (se_num >=AMDGPU_GFX_MAX_SE )
@@ -799,7 +801,7 @@ static int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file min((size_t)size, sizeof(dev_info))) ? -EFAULT : 0; }case AMDGPU_INFO_VCE_CLOCK_TABLE : { -unsigned i; +unsigned int i;struct drm_amdgpu_info_vce_clock_table vce_clk_table = {};struct amd_vce_state *vce_state;
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 149/406 md/bitmap: dont set max_write_behind if there is no write mostly device
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guoqing Jiang <[email protected]>
[ Upstream commit 8c13ab115b577bd09097b9d77916732e97e31b7b ]
We shouldn't set it since write behind IO should only happen to write mostly device.
Stable-dep-of: 44abfa6a95df ("md/md-bitmap: hold 'reconfig_mutex' in backlog_store()")
--- drivers/md/md-bitmap.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
drivers/md/md-bitmap.c +19 -0
@@ -2476,11 +2476,30 @@ backlog_store(struct mddev *mddev, const char *buf, size_t len) {unsigned long backlog;unsigned long old_mwb = mddev->bitmap_info.max_write_behind; +struct md_rdev *rdev; +bool has_write_mostly = false;int rv =kstrtoul (buf,10 , &backlog);if (rv)return rv;if (backlog >COUNTER_MAX )return -EINVAL ; + +/* +* Without write mostly device, it doesn't make sense to set +* backlog for max_write_behind. +*/ +rdev_for_each (rdev, mddev) { +if (test_bit (WriteMostly, &rdev->flags)) { + has_write_mostly = true; +break ; + } + } +if (!has_write_mostly) { +pr_warn_ratelimited ("%s: can't set backlog, no write mostly device available\n" , +mdname (mddev)); +return -EINVAL ; + } + mddev->bitmap_info.max_write_behind = backlog;if (!backlog && mddev->serial_info_pool) {/* serial_info_pool is not needed if backlog is zero */
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 150/406 md/md-bitmap: hold reconfig_mutex in backlog_store()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yu Kuai <[email protected]>
[ Upstream commit 44abfa6a95df425c0660d56043020b67e6d93ab8 ]
Several reasons why 'reconfig_mutex' should be held:
1) rdev_for_each() is not safe to be called without the lock, because rdev can be removed concurrently.
2) mddev_destroy_serial_pool() and mddev_create_serial_pool() should not be called concurrently.
3) mddev_suspend() from mddev_destroy/create_serial_pool() should be protected by the lock.
--- drivers/md/md-bitmap.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/md/md-bitmap.c +7 -0
@@ -2484,6 +2484,10 @@ backlog_store(struct mddev *mddev, const char *buf, size_t len)if (backlog >COUNTER_MAX )return -EINVAL ; + rv =mddev_lock (mddev); +if (rv) +return rv; +/* * Without write mostly device, it doesn't make sense to set * backlog for max_write_behind.
@@ -2497,6 +2501,7 @@ backlog_store(struct mddev *mddev, const char *buf, size_t len)if (!has_write_mostly) {pr_warn_ratelimited ("%s: can't set backlog, no write mostly device available\n" ,mdname (mddev)); +mddev_unlock (mddev);return -EINVAL ; }
@@ -2514,6 +2519,8 @@ backlog_store(struct mddev *mddev, const char *buf, size_t len) }if (old_mwb != backlog)md_bitmap_update_sb (mddev->bitmap); + +mddev_unlock (mddev);return len; }
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 151/406 drm/tegra: Remove superfluous error messages around platform_get_irq()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tan Zhongjun <[email protected]>
[ Upstream commit d12919bb5da571ec50588ef97683d37e36dc2de5 ]
The platform_get_irq() prints error message telling that interrupt is missing,hence there is no need to duplicated that message in the drivers.
Stable-dep-of: 2a1ca44b6543 ("drm/tegra: dpaux: Fix incorrect return value of platform_get_irq")
--- drivers/gpu/drm/tegra/dpaux.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/gpu/drm/tegra/dpaux.c +1 -3
@@ -467,10 +467,8 @@ static int tegra_dpaux_probe(struct platform_device *pdev)return PTR_ERR (dpaux->regs); dpaux->irq =platform_get_irq (pdev,0 ); -if (dpaux->irq <0 ) { -dev_err (&pdev->dev,"failed to get IRQ\n" ); +if (dpaux->irq <0 )return -ENXIO ; - }if (!pdev->dev.pm_domain) { dpaux->rst =devm_reset_control_get (&pdev->dev,"dpaux" );
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 152/406 drm/tegra: dpaux: Fix incorrect return value of platform_get_irq
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yangtao Li <[email protected]>
[ Upstream commit 2a1ca44b654346cadfc538c4fb32eecd8daf3140 ]
When platform_get_irq fails, we should return dpaux->irq instead of -ENXIO.
--- drivers/gpu/drm/tegra/dpaux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/tegra/dpaux.c +1 -1
@@ -468,7 +468,7 @@ static int tegra_dpaux_probe(struct platform_device *pdev) dpaux->irq =platform_get_irq (pdev,0 );if (dpaux->irq <0 ) -return -ENXIO ; +return dpaux->irq;if (!pdev->dev.pm_domain) { dpaux->rst =devm_reset_control_get (&pdev->dev,"dpaux" );
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 153/406 of: unittest: fix null pointer dereferencing in of_unittest_find_node_by_name()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ruan Jinjie <[email protected]>
[ Upstream commit d6ce4f0ea19c32f10867ed93d8386924326ab474 ]
when kmalloc() fail to allocate memory in kasprintf(), name or full_name will be NULL, strcmp() will cause null pointer dereference.
--- drivers/of/unittest.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/of/unittest.c +6 -4
@@ -69,7 +69,7 @@ static void __init of_unittest_find_node_by_name(void) np =of_find_node_by_path ("/testcase-data" ); name =kasprintf (GFP_KERNEL ,"%pOF" , np); -unittest (np && !strcmp ("/testcase-data" , name), +unittest (np && name && !strcmp ("/testcase-data" , name),"find /testcase-data failed\n" );of_node_put (np);kfree (name);
@@ -80,14 +80,14 @@ static void __init of_unittest_find_node_by_name(void) np =of_find_node_by_path ("/testcase-data/phandle-tests/consumer-a" ); name =kasprintf (GFP_KERNEL ,"%pOF" , np); -unittest (np && !strcmp ("/testcase-data/phandle-tests/consumer-a" , name), +unittest (np && name && !strcmp ("/testcase-data/phandle-tests/consumer-a" , name),"find /testcase-data/phandle-tests/consumer-a failed\n" );of_node_put (np);kfree (name); np =of_find_node_by_path ("testcase-alias" ); name =kasprintf (GFP_KERNEL ,"%pOF" , np); -unittest (np && !strcmp ("/testcase-data" , name), +unittest (np && name && !strcmp ("/testcase-data" , name),"find testcase-alias failed\n" );of_node_put (np);kfree (name);
@@ -98,7 +98,7 @@ static void __init of_unittest_find_node_by_name(void) np =of_find_node_by_path ("testcase-alias/phandle-tests/consumer-a" ); name =kasprintf (GFP_KERNEL ,"%pOF" , np); -unittest (np && !strcmp ("/testcase-data/phandle-tests/consumer-a" , name), +unittest (np && name && !strcmp ("/testcase-data/phandle-tests/consumer-a" , name),"find testcase-alias/phandle-tests/consumer-a failed\n" );of_node_put (np);kfree (name);
@@ -1376,6 +1376,8 @@ static void attach_node_and_children(struct device_node *np)const char *full_name; full_name =kasprintf (GFP_KERNEL ,"%pOF" , np); +if (!full_name) +return ;if (!strcmp (full_name,"/__local_fixups__" ) || !strcmp (full_name,"/__fixups__" )) {
Signature · 1 line
2.40.1
Greg Kroah-Hartman
maintainerPATCH 154/406 drm/armada: Fix off-by-one error in armada_overlay_get_property()
In reply to Greg Kroah-Hartman5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 5f0d984053f74983a287100a9519b2fabb785fb5 ]
As ffs() returns one more than the index of the first bit set (zero means no bits set), the color key mode value is shifted one position too much.
Fix this by using FIELD_GET() instead.
--- drivers/gpu/drm/armada/armada_overlay.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/gpu/drm/armada/armada_overlay.c +4 -2
@@ -4,6 +4,8 @@* Rewritten from the dovefb driver, and Armada510 manuals. */ +#include <linux/bitfield.h> +#include <drm/armada_drm.h> #include <drm/drm_atomic.h> #include <drm/drm_atomic_helper.h>
@@ -446,8 +448,8 @@ static int armada_overlay_get_property(struct drm_plane *plane,drm_to_overlay_state (state)->colorkey_ug, drm_to_overlay_state(state)->colorkey_vb, 0); }else if (property == priv->colorkey_mode_prop) { - *val = (drm_to_overlay_state (state)->colorkey_mode & -CFG_CKMODE_MASK ) >>ffs (CFG_CKMODE_MASK ); + *val =FIELD_GET (CFG_CKMODE_MASK , +drm_to_overlay_state (state)->colorkey_mode); }else if (property == priv->brightness_prop) { *val =drm_to_overlay_state (state)->brightness +256 ; }else if (property == priv->contrast_prop) {
Signature · 1 line
2.40.1