Refactor and Add helper function for combophy/tc ports
Subsystems (2)
cover Refactor and Add helper function for combophy/tc ports
This series refactor code and register definitions for combophy port registers. And also creates helper functions to identify combophy/tc ports.
Lucas De Marchi (1):
drm/i915/icl: Introduce new macros to get combophy registers
Mahesh Kumar (4):
drm/i915/icl: create function to identify combophy port drm/i915/icl: use combophy/TC helper functions during display
detection
drm/i915/icl: Combine all port/combophy macros at one place drm/i915/icl: Fix DDI/TC port clk_off bits
Vandita Kulkarni (3):
drm/i915/icl: Refactor get_ddi_pll using helper func drm/i915/icl: Use helper functions to classify the ports drm/i915/icl: Refactor icl pll functions
drivers/gpu/drm/i915/i915_reg.h | 245 +++++++++++++++------------------- drivers/gpu/drm/i915/intel_ddi.c | 36 +++-- drivers/gpu/drm/i915/intel_display.c | 36 +++-- drivers/gpu/drm/i915/intel_dp.c | 15 +-- drivers/gpu/drm/i915/intel_dpll_mgr.c | 70 +++------- drivers/gpu/drm/i915/intel_dpll_mgr.h | 2 + drivers/gpu/drm/i915/intel_drv.h | 1 + 7 files changed, 178 insertions(+), 227 deletions(-)
Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 1/8 drm/i915/icl: create function to identify combophy port
This patch creates a function/wrapper to check if port is combophy port instead of explicitly comparing ports.
--- drivers/gpu/drm/i915/intel_ddi.c | 15 ++++++++------- drivers/gpu/drm/i915/intel_display.c | 11 +++++++++++ drivers/gpu/drm/i915/intel_drv.h | 1 + 3 files changed, 20 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +8 -7
@@ -916,7 +916,7 @@ static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port por level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;if (IS_ICELAKE (dev_priv)) { -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_get_combo_buf_trans (dev_priv, port,INTEL_OUTPUT_HDMI , &n_entries);else
@@ -1535,7 +1535,7 @@ static void icl_ddi_clock_get(struct intel_encoder *encoder,uint32_t pll_id; pll_id =intel_get_shared_dpll_id (dev_priv, pipe_config->shared_dpll); -if (port ==PORT_A || port ==PORT_B ) { +if (intel_port_is_combophy (dev_priv, port)) {if (intel_crtc_has_type (pipe_config,INTEL_OUTPUT_HDMI )) link_clock =cnl_calc_wrpll_link (dev_priv, pll_id);else
@@ -2235,7 +2235,7 @@ u8 intel_ddi_dp_voltage_max(struct intel_encoder *encoder)int n_entries;if (IS_ICELAKE (dev_priv)) { -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_get_combo_buf_trans (dev_priv, port, encoder->type, &n_entries);else
@@ -2669,9 +2669,10 @@ static void icl_ddi_vswing_sequence(struct intel_encoder *encoder, u32 level, enum intel_output_type type) { +struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);enum port port = encoder->port; -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_combo_phy_ddi_vswing_sequence (encoder, level, type);else icl_mg_phy_ddi_vswing_sequence (encoder, link_clock, level);
@@ -2757,7 +2758,7 @@ void icl_map_plls_to_ports(struct drm_crtc *crtc, val =I915_READ (DPCLKA_CFGCR0_ICL );WARN_ON ((val &DPCLKA_CFGCR0_DDI_CLK_OFF (port)) ==0 ); -if (port ==PORT_A || port ==PORT_B ) { +if (intel_port_is_combophy (dev_priv, port)) { val &= ~DPCLKA_CFGCR0_DDI_CLK_SEL_MASK (port); val |=DPCLKA_CFGCR0_DDI_CLK_SEL (pll->info->id, port);I915_WRITE (DPCLKA_CFGCR0_ICL , val);
@@ -2810,7 +2811,7 @@ static void intel_ddi_clk_select(struct intel_encoder *encoder,mutex_lock (&dev_priv->dpll_lock);if (IS_ICELAKE (dev_priv)) { -if (port >=PORT_C ) +if (!intel_port_is_combophy (dev_priv, port))I915_WRITE (DDI_CLK_SEL (port),icl_pll_to_ddi_pll_sel (encoder, pll)); }else if (IS_CANNONLAKE (dev_priv)) {
@@ -2852,7 +2853,7 @@ static void intel_ddi_clk_disable(struct intel_encoder *encoder)enum port port = encoder->port;if (IS_ICELAKE (dev_priv)) { -if (port >=PORT_C ) +if (!intel_port_is_combophy (dev_priv, port))I915_WRITE (DDI_CLK_SEL (port),DDI_CLK_SEL_NONE ); }else if (IS_CANNONLAKE (dev_priv)) { I915_WRITE(DPCLKA_CFGCR0, I915_READ(DPCLKA_CFGCR0) |
drivers/gpu/drm/i915/intel_display.c +11 -0
@@ -5947,6 +5947,17 @@ enum tc_port intel_port_to_tc(struct drm_i915_private *dev_priv, enum port port)return port -PORT_C ; } +bool intel_port_is_combophy (struct drm_i915_private *dev_priv,enum port port) +{ +if (port ==PORT_NONE ) +return false; + +if (IS_ICELAKE (dev_priv)) +return (port <=PORT_B ); + +return false; +} +enum intel_display_power_domain intel_port_to_power_domain (enum port port) {switch (port) {
drivers/gpu/drm/i915/intel_drv.h +1 -0
@@ -1443,6 +1443,7 @@ void icl_map_plls_to_ports(struct drm_crtc *crtc,void icl_unmap_plls_to_ports (struct drm_crtc *crtc,struct intel_crtc_state *crtc_state,struct drm_atomic_state *old_state); +bool intel_port_is_combophy (struct drm_i915_private *dev_priv,enum port port);unsigned int intel_fb_align_height (const struct drm_framebuffer *fb,int color_plane,unsigned int height);
Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 1/8] drm/i915/icl: create function to identify combophy port
Quoted 6 lines · Mahesh Kumar
This patch creates a function/wrapper to check if port is combophy port instead of explicitly comparing ports.
Signed-off-by Mahesh Kumar <[email protected]>Cc Madhav Chauhan <[email protected]>Cc Manasi Navare <[email protected]>
Quoted 117 lines
--- drivers/gpu/drm/i915/intel_ddi.c | 15 ++++++++------- drivers/gpu/drm/i915/intel_display.c | 11 +++++++++++ drivers/gpu/drm/i915/intel_drv.h | 1 + 3 files changed, 20 insertions(+), 7 deletions(-)drivers/gpu/drm/i915/intel_ddi.c +8
-7@@ -916,7 +916,7 @@ static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port por level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;if (IS_ICELAKE (dev_priv)) { -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_get_combo_buf_trans (dev_priv, port,INTEL_OUTPUT_HDMI , &n_entries);else @@ -1535,7 +1535,7 @@ static void icl_ddi_clock_get(struct intel_encoder *encoder,uint32_t pll_id; pll_id =intel_get_shared_dpll_id (dev_priv, pipe_config->shared_dpll); -if (port ==PORT_A || port ==PORT_B ) { +if (intel_port_is_combophy (dev_priv, port)) {if (intel_crtc_has_type (pipe_config,INTEL_OUTPUT_HDMI )) link_clock =cnl_calc_wrpll_link (dev_priv, pll_id);else @@ -2235,7 +2235,7 @@ u8 intel_ddi_dp_voltage_max(struct intel_encoder *encoder)int n_entries;if (IS_ICELAKE (dev_priv)) { -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_get_combo_buf_trans (dev_priv, port, encoder->type, &n_entries);else @@ -2669,9 +2669,10 @@ static void icl_ddi_vswing_sequence(struct intel_encoder *encoder, u32 level, enum intel_output_type type) { +struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);enum port port = encoder->port; -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_combo_phy_ddi_vswing_sequence (encoder, level, type);else icl_mg_phy_ddi_vswing_sequence (encoder, link_clock, level);@@ -2757,7 +2758,7 @@ void icl_map_plls_to_ports(struct drm_crtc *crtc, val =I915_READ (DPCLKA_CFGCR0_ICL );WARN_ON ((val &DPCLKA_CFGCR0_DDI_CLK_OFF (port)) ==0 ); -if (port ==PORT_A || port ==PORT_B ) { +if (intel_port_is_combophy (dev_priv, port)) { val &= ~DPCLKA_CFGCR0_DDI_CLK_SEL_MASK (port); val |=DPCLKA_CFGCR0_DDI_CLK_SEL (pll->info->id, port);I915_WRITE (DPCLKA_CFGCR0_ICL , val);@@ -2810,7 +2811,7 @@ static void intel_ddi_clk_select(struct intel_encoder *encoder,mutex_lock (&dev_priv->dpll_lock);if (IS_ICELAKE (dev_priv)) { -if (port >=PORT_C ) +if (!intel_port_is_combophy (dev_priv, port))I915_WRITE (DDI_CLK_SEL (port),icl_pll_to_ddi_pll_sel (encoder, pll)); }else if (IS_CANNONLAKE (dev_priv)) {@@ -2852,7 +2853,7 @@ static void intel_ddi_clk_disable(struct intel_encoder *encoder)enum port port = encoder->port;if (IS_ICELAKE (dev_priv)) { -if (port >=PORT_C ) +if (!intel_port_is_combophy (dev_priv, port))I915_WRITE (DDI_CLK_SEL (port),DDI_CLK_SEL_NONE ); }else if (IS_CANNONLAKE (dev_priv)) { I915_WRITE(DPCLKA_CFGCR0, I915_READ(DPCLKA_CFGCR0) |drivers/gpu/drm/i915/intel_display.c +11
-0@@ -5947,6 +5947,17 @@ enum tc_port intel_port_to_tc(struct drm_i915_private *dev_priv, enum port port)return port -PORT_C ; } +bool intel_port_is_combophy (struct drm_i915_private *dev_priv,enum port port) +{ +if (port ==PORT_NONE ) +return false; + +if (IS_ICELAKE (dev_priv)) +return (port <=PORT_B ); + +return false; +} +enum intel_display_power_domain intel_port_to_power_domain (enum port port) {switch (port) {drivers/gpu/drm/i915/intel_drv.h +1
-0@@ -1443,6 +1443,7 @@ void icl_map_plls_to_ports(struct drm_crtc *crtc,void icl_unmap_plls_to_ports (struct drm_crtc *crtc,struct intel_crtc_state *crtc_state,struct drm_atomic_state *old_state); +bool intel_port_is_combophy (struct drm_i915_private *dev_priv,enum port port);unsigned int intel_fb_align_height (const struct drm_framebuffer *fb,int color_plane,unsigned int height);Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 1/8] drm/i915/icl: create function to identify combophy port
In reply to Mahesh KumarQuoted 87 lines · Mahesh Kumar
This patch creates a function/wrapper to check if port is combophy port instead of explicitly comparing ports.
Signed-off-by Mahesh Kumar <[email protected]>Cc Madhav Chauhan <[email protected]>Cc Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/intel_ddi.c | 15 ++++++++------- drivers/gpu/drm/i915/intel_display.c | 11 +++++++++++ drivers/gpu/drm/i915/intel_drv.h | 1 + 3 files changed, 20 insertions(+), 7 deletions(-)drivers/gpu/drm/i915/intel_ddi.c +8
-7@@ -916,7 +916,7 @@ static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port por level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;if (IS_ICELAKE (dev_priv)) { -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_get_combo_buf_trans (dev_priv, port,INTEL_OUTPUT_HDMI , &n_entries);else @@ -1535,7 +1535,7 @@ static void icl_ddi_clock_get(struct intel_encoder *encoder,uint32_t pll_id; pll_id =intel_get_shared_dpll_id (dev_priv, pipe_config->shared_dpll); -if (port ==PORT_A || port ==PORT_B ) { +if (intel_port_is_combophy (dev_priv, port)) {if (intel_crtc_has_type (pipe_config,INTEL_OUTPUT_HDMI )) link_clock =cnl_calc_wrpll_link (dev_priv, pll_id);else @@ -2235,7 +2235,7 @@ u8 intel_ddi_dp_voltage_max(struct intel_encoder *encoder)int n_entries;if (IS_ICELAKE (dev_priv)) { -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_get_combo_buf_trans (dev_priv, port, encoder->type, &n_entries);else @@ -2669,9 +2669,10 @@ static void icl_ddi_vswing_sequence(struct intel_encoder *encoder, u32 level, enum intel_output_type type) { +struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);enum port port = encoder->port; -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_combo_phy_ddi_vswing_sequence (encoder, level, type);else icl_mg_phy_ddi_vswing_sequence (encoder, link_clock, level);@@ -2757,7 +2758,7 @@ void icl_map_plls_to_ports(struct drm_crtc *crtc, val =I915_READ (DPCLKA_CFGCR0_ICL );WARN_ON ((val &DPCLKA_CFGCR0_DDI_CLK_OFF (port)) ==0 ); -if (port ==PORT_A || port ==PORT_B ) { +if (intel_port_is_combophy (dev_priv, port)) { val &= ~DPCLKA_CFGCR0_DDI_CLK_SEL_MASK (port); val |=DPCLKA_CFGCR0_DDI_CLK_SEL (pll->info->id, port);I915_WRITE (DPCLKA_CFGCR0_ICL , val);@@ -2810,7 +2811,7 @@ static void intel_ddi_clk_select(struct intel_encoder *encoder,mutex_lock (&dev_priv->dpll_lock);if (IS_ICELAKE (dev_priv)) { -if (port >=PORT_C ) +if (!intel_port_is_combophy (dev_priv, port))I915_WRITE (DDI_CLK_SEL (port),icl_pll_to_ddi_pll_sel (encoder, pll)); }else if (IS_CANNONLAKE (dev_priv)) {@@ -2852,7 +2853,7 @@ static void intel_ddi_clk_disable(struct intel_encoder *encoder)enum port port = encoder->port;if (IS_ICELAKE (dev_priv)) { -if (port >=PORT_C ) +if (!intel_port_is_combophy (dev_priv, port))I915_WRITE (DDI_CLK_SEL (port),DDI_CLK_SEL_NONE ); }else if (IS_CANNONLAKE (dev_priv)) { I915_WRITE(DPCLKA_CFGCR0, I915_READ(DPCLKA_CFGCR0) |drivers/gpu/drm/i915/intel_display.c +0
-0
drivers/gpu/drm/i915/intel_display.c enum tc_port intel_port_to_tc(struct drm_i915_private *dev_priv, enum port port) · line 5956
Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +7
-0@@ -5947,6 +5947,17 @@ enum tc_port intel_port_to_tc(struct drm_i915_private *dev_priv, enum port port)return port -PORT_C ; } +bool intel_port_is_combophy (struct drm_i915_private *dev_priv,enum port port) +{ +if (port ==PORT_NONE ) +return false; + +if (IS_ICELAKE (dev_priv)) +return (port <=PORT_B );
please remove parenthesis
Quoted 12 lines
drivers/gpu/drm/i915/intel_display.c +4
-0+ +return false; +} +enum intel_display_power_domain intel_port_to_power_domain (enum port port) {switch (port) {drivers/gpu/drm/i915/intel_drv.h +0
-0
drivers/gpu/drm/i915/intel_drv.h void icl_map_plls_to_ports(struct drm_crtc *crtc, · line 1446
Quoted 4 lines
drivers/gpu/drm/i915/intel_drv.h +1
-0@@ -1443,6 +1443,7 @@ void icl_map_plls_to_ports(struct drm_crtc *crtc,void icl_unmap_plls_to_ports (struct drm_crtc *crtc,struct intel_crtc_state *crtc_state,struct drm_atomic_state *old_state); +bool intel_port_is_combophy (struct drm_i915_private *dev_priv,enum port port);
this should be together with the other helper with the same namespace, i.e. on top of intel_port_is_tc()
Lucas De Marchi
Quoted 10 lines
drivers/gpu/drm/i915/intel_drv.h +0
-0unsigned int intel_fb_align_height (const struct drm_framebuffer *fb,int color_plane,unsigned int height);Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 1/8 drm/i915/icl: create function to identify combophy port
This patch creates a function/wrapper to check if port is combophy port instead of explicitly comparing ports.
Changes since V1:
- keep all intel_port_is_* helper together (Lucas)
--- drivers/gpu/drm/i915/intel_ddi.c | 15 ++++++++------- drivers/gpu/drm/i915/intel_display.c | 11 +++++++++++ drivers/gpu/drm/i915/intel_drv.h | 1 + 3 files changed, 20 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +8 -7
@@ -916,7 +916,7 @@ static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port por level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;if (IS_ICELAKE (dev_priv)) { -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_get_combo_buf_trans (dev_priv, port,INTEL_OUTPUT_HDMI , &n_entries);else
@@ -1535,7 +1535,7 @@ static void icl_ddi_clock_get(struct intel_encoder *encoder,uint32_t pll_id; pll_id =intel_get_shared_dpll_id (dev_priv, pipe_config->shared_dpll); -if (port ==PORT_A || port ==PORT_B ) { +if (intel_port_is_combophy (dev_priv, port)) {if (intel_crtc_has_type (pipe_config,INTEL_OUTPUT_HDMI )) link_clock =cnl_calc_wrpll_link (dev_priv, pll_id);else
@@ -2235,7 +2235,7 @@ u8 intel_ddi_dp_voltage_max(struct intel_encoder *encoder)int n_entries;if (IS_ICELAKE (dev_priv)) { -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_get_combo_buf_trans (dev_priv, port, encoder->type, &n_entries);else
@@ -2669,9 +2669,10 @@ static void icl_ddi_vswing_sequence(struct intel_encoder *encoder, u32 level, enum intel_output_type type) { +struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);enum port port = encoder->port; -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_combo_phy_ddi_vswing_sequence (encoder, level, type);else icl_mg_phy_ddi_vswing_sequence (encoder, link_clock, level);
@@ -2757,7 +2758,7 @@ void icl_map_plls_to_ports(struct drm_crtc *crtc, val =I915_READ (DPCLKA_CFGCR0_ICL );WARN_ON ((val &DPCLKA_CFGCR0_DDI_CLK_OFF (port)) ==0 ); -if (port ==PORT_A || port ==PORT_B ) { +if (intel_port_is_combophy (dev_priv, port)) { val &= ~DPCLKA_CFGCR0_DDI_CLK_SEL_MASK (port); val |=DPCLKA_CFGCR0_DDI_CLK_SEL (pll->info->id, port);I915_WRITE (DPCLKA_CFGCR0_ICL , val);
@@ -2810,7 +2811,7 @@ static void intel_ddi_clk_select(struct intel_encoder *encoder,mutex_lock (&dev_priv->dpll_lock);if (IS_ICELAKE (dev_priv)) { -if (port >=PORT_C ) +if (!intel_port_is_combophy (dev_priv, port))I915_WRITE (DDI_CLK_SEL (port),icl_pll_to_ddi_pll_sel (encoder, pll)); }else if (IS_CANNONLAKE (dev_priv)) {
@@ -2852,7 +2853,7 @@ static void intel_ddi_clk_disable(struct intel_encoder *encoder)enum port port = encoder->port;if (IS_ICELAKE (dev_priv)) { -if (port >=PORT_C ) +if (!intel_port_is_combophy (dev_priv, port))I915_WRITE (DDI_CLK_SEL (port),DDI_CLK_SEL_NONE ); }else if (IS_CANNONLAKE (dev_priv)) { I915_WRITE(DPCLKA_CFGCR0, I915_READ(DPCLKA_CFGCR0) |
drivers/gpu/drm/i915/intel_display.c +11 -0
@@ -5944,6 +5944,17 @@ static void i9xx_pfit_enable(struct intel_crtc *crtc)I915_WRITE (BCLRPAT (crtc->pipe),0 ); } +bool intel_port_is_combophy (struct drm_i915_private *dev_priv,enum port port) +{ +if (port ==PORT_NONE ) +return false; + +if (IS_ICELAKE (dev_priv)) +return port <=PORT_B ; + +return false; +} +bool intel_port_is_tc (struct drm_i915_private *dev_priv,enum port port) {if (IS_ICELAKE (dev_priv))
drivers/gpu/drm/i915/intel_drv.h +1 -0
@@ -1515,6 +1515,7 @@ void intel_connector_attach_encoder(struct intel_connector *connector, struct intel_encoder *encoder);struct drm_display_mode *intel_encoder_current_mode (struct intel_encoder *encoder); +bool intel_port_is_combophy (struct drm_i915_private *dev_priv,enum port port);bool intel_port_is_tc (struct drm_i915_private *dev_priv,enum port port);enum tc_port intel_port_to_tc (struct drm_i915_private *dev_priv,enum port port);
Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v2 1/8] drm/i915/icl: create function to identify combophy port
Quoted 10 lines · Mahesh Kumar
This patch creates a function/wrapper to check if port is combophy port instead of explicitly comparing ports.
Changes since V1:
- keep all intel_port_is_* helper together (Lucas)Signed-off-by Mahesh Kumar <[email protected]>Cc Madhav Chauhan <[email protected]>Cc Manasi Navare <[email protected]>Reviewed-by Rodrigo Vivi <[email protected]>
Lucas De Marchi
Quoted 117 lines
--- drivers/gpu/drm/i915/intel_ddi.c | 15 ++++++++------- drivers/gpu/drm/i915/intel_display.c | 11 +++++++++++ drivers/gpu/drm/i915/intel_drv.h | 1 + 3 files changed, 20 insertions(+), 7 deletions(-)drivers/gpu/drm/i915/intel_ddi.c +8
-7@@ -916,7 +916,7 @@ static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port por level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;if (IS_ICELAKE (dev_priv)) { -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_get_combo_buf_trans (dev_priv, port,INTEL_OUTPUT_HDMI , &n_entries);else @@ -1535,7 +1535,7 @@ static void icl_ddi_clock_get(struct intel_encoder *encoder,uint32_t pll_id; pll_id =intel_get_shared_dpll_id (dev_priv, pipe_config->shared_dpll); -if (port ==PORT_A || port ==PORT_B ) { +if (intel_port_is_combophy (dev_priv, port)) {if (intel_crtc_has_type (pipe_config,INTEL_OUTPUT_HDMI )) link_clock =cnl_calc_wrpll_link (dev_priv, pll_id);else @@ -2235,7 +2235,7 @@ u8 intel_ddi_dp_voltage_max(struct intel_encoder *encoder)int n_entries;if (IS_ICELAKE (dev_priv)) { -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_get_combo_buf_trans (dev_priv, port, encoder->type, &n_entries);else @@ -2669,9 +2669,10 @@ static void icl_ddi_vswing_sequence(struct intel_encoder *encoder, u32 level, enum intel_output_type type) { +struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);enum port port = encoder->port; -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_combo_phy_ddi_vswing_sequence (encoder, level, type);else icl_mg_phy_ddi_vswing_sequence (encoder, link_clock, level);@@ -2757,7 +2758,7 @@ void icl_map_plls_to_ports(struct drm_crtc *crtc, val =I915_READ (DPCLKA_CFGCR0_ICL );WARN_ON ((val &DPCLKA_CFGCR0_DDI_CLK_OFF (port)) ==0 ); -if (port ==PORT_A || port ==PORT_B ) { +if (intel_port_is_combophy (dev_priv, port)) { val &= ~DPCLKA_CFGCR0_DDI_CLK_SEL_MASK (port); val |=DPCLKA_CFGCR0_DDI_CLK_SEL (pll->info->id, port);I915_WRITE (DPCLKA_CFGCR0_ICL , val);@@ -2810,7 +2811,7 @@ static void intel_ddi_clk_select(struct intel_encoder *encoder,mutex_lock (&dev_priv->dpll_lock);if (IS_ICELAKE (dev_priv)) { -if (port >=PORT_C ) +if (!intel_port_is_combophy (dev_priv, port))I915_WRITE (DDI_CLK_SEL (port),icl_pll_to_ddi_pll_sel (encoder, pll)); }else if (IS_CANNONLAKE (dev_priv)) {@@ -2852,7 +2853,7 @@ static void intel_ddi_clk_disable(struct intel_encoder *encoder)enum port port = encoder->port;if (IS_ICELAKE (dev_priv)) { -if (port >=PORT_C ) +if (!intel_port_is_combophy (dev_priv, port))I915_WRITE (DDI_CLK_SEL (port),DDI_CLK_SEL_NONE ); }else if (IS_CANNONLAKE (dev_priv)) { I915_WRITE(DPCLKA_CFGCR0, I915_READ(DPCLKA_CFGCR0) |drivers/gpu/drm/i915/intel_display.c +11
-0@@ -5944,6 +5944,17 @@ static void i9xx_pfit_enable(struct intel_crtc *crtc)I915_WRITE (BCLRPAT (crtc->pipe),0 ); } +bool intel_port_is_combophy (struct drm_i915_private *dev_priv,enum port port) +{ +if (port ==PORT_NONE ) +return false; + +if (IS_ICELAKE (dev_priv)) +return port <=PORT_B ; + +return false; +} +bool intel_port_is_tc (struct drm_i915_private *dev_priv,enum port port) {if (IS_ICELAKE (dev_priv))drivers/gpu/drm/i915/intel_drv.h +1
-0@@ -1515,6 +1515,7 @@ void intel_connector_attach_encoder(struct intel_connector *connector, struct intel_encoder *encoder);struct drm_display_mode *intel_encoder_current_mode (struct intel_encoder *encoder); +bool intel_port_is_combophy (struct drm_i915_private *dev_priv,enum port port);bool intel_port_is_tc (struct drm_i915_private *dev_priv,enum port port);enum tc_port intel_port_to_tc (struct drm_i915_private *dev_priv,enum port port);Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 1/8] drm/i915/icl: create function to identify combophy port
In reply to Mahesh KumarQuoted 6 lines · Mahesh Kumar
This patch creates a function/wrapper to check if port is combophy port instead of explicitly comparing ports.
Signed-off-by Mahesh Kumar <[email protected]>Cc Madhav Chauhan <[email protected]>Cc Manasi Navare <[email protected]>
Looks good to me.
Manasi
Quoted 113 lines
--- drivers/gpu/drm/i915/intel_ddi.c | 15 ++++++++------- drivers/gpu/drm/i915/intel_display.c | 11 +++++++++++ drivers/gpu/drm/i915/intel_drv.h | 1 + 3 files changed, 20 insertions(+), 7 deletions(-)drivers/gpu/drm/i915/intel_ddi.c +8
-7@@ -916,7 +916,7 @@ static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port por level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;if (IS_ICELAKE (dev_priv)) { -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_get_combo_buf_trans (dev_priv, port,INTEL_OUTPUT_HDMI , &n_entries);else @@ -1535,7 +1535,7 @@ static void icl_ddi_clock_get(struct intel_encoder *encoder,uint32_t pll_id; pll_id =intel_get_shared_dpll_id (dev_priv, pipe_config->shared_dpll); -if (port ==PORT_A || port ==PORT_B ) { +if (intel_port_is_combophy (dev_priv, port)) {if (intel_crtc_has_type (pipe_config,INTEL_OUTPUT_HDMI )) link_clock =cnl_calc_wrpll_link (dev_priv, pll_id);else @@ -2235,7 +2235,7 @@ u8 intel_ddi_dp_voltage_max(struct intel_encoder *encoder)int n_entries;if (IS_ICELAKE (dev_priv)) { -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_get_combo_buf_trans (dev_priv, port, encoder->type, &n_entries);else @@ -2669,9 +2669,10 @@ static void icl_ddi_vswing_sequence(struct intel_encoder *encoder, u32 level, enum intel_output_type type) { +struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);enum port port = encoder->port; -if (port ==PORT_A || port ==PORT_B ) +if (intel_port_is_combophy (dev_priv, port))icl_combo_phy_ddi_vswing_sequence (encoder, level, type);else icl_mg_phy_ddi_vswing_sequence (encoder, link_clock, level);@@ -2757,7 +2758,7 @@ void icl_map_plls_to_ports(struct drm_crtc *crtc, val =I915_READ (DPCLKA_CFGCR0_ICL );WARN_ON ((val &DPCLKA_CFGCR0_DDI_CLK_OFF (port)) ==0 ); -if (port ==PORT_A || port ==PORT_B ) { +if (intel_port_is_combophy (dev_priv, port)) { val &= ~DPCLKA_CFGCR0_DDI_CLK_SEL_MASK (port); val |=DPCLKA_CFGCR0_DDI_CLK_SEL (pll->info->id, port);I915_WRITE (DPCLKA_CFGCR0_ICL , val);@@ -2810,7 +2811,7 @@ static void intel_ddi_clk_select(struct intel_encoder *encoder,mutex_lock (&dev_priv->dpll_lock);if (IS_ICELAKE (dev_priv)) { -if (port >=PORT_C ) +if (!intel_port_is_combophy (dev_priv, port))I915_WRITE (DDI_CLK_SEL (port),icl_pll_to_ddi_pll_sel (encoder, pll)); }else if (IS_CANNONLAKE (dev_priv)) {@@ -2852,7 +2853,7 @@ static void intel_ddi_clk_disable(struct intel_encoder *encoder)enum port port = encoder->port;if (IS_ICELAKE (dev_priv)) { -if (port >=PORT_C ) +if (!intel_port_is_combophy (dev_priv, port))I915_WRITE (DDI_CLK_SEL (port),DDI_CLK_SEL_NONE ); }else if (IS_CANNONLAKE (dev_priv)) { I915_WRITE(DPCLKA_CFGCR0, I915_READ(DPCLKA_CFGCR0) |drivers/gpu/drm/i915/intel_display.c +11
-0@@ -5947,6 +5947,17 @@ enum tc_port intel_port_to_tc(struct drm_i915_private *dev_priv, enum port port)return port -PORT_C ; } +bool intel_port_is_combophy (struct drm_i915_private *dev_priv,enum port port) +{ +if (port ==PORT_NONE ) +return false; + +if (IS_ICELAKE (dev_priv)) +return (port <=PORT_B ); + +return false; +} +enum intel_display_power_domain intel_port_to_power_domain (enum port port) {switch (port) {drivers/gpu/drm/i915/intel_drv.h +1
-0@@ -1443,6 +1443,7 @@ void icl_map_plls_to_ports(struct drm_crtc *crtc,void icl_unmap_plls_to_ports (struct drm_crtc *crtc,struct intel_crtc_state *crtc_state,struct drm_atomic_state *old_state); +bool intel_port_is_combophy (struct drm_i915_private *dev_priv,enum port port);unsigned int intel_fb_align_height (const struct drm_framebuffer *fb,int color_plane,unsigned int height);Signature · 1 line
2.16.2
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/8 drm/i915/icl: use combophy/TC helper functions during display detection
In reply to Mahesh KumarInstead of directly comparing HPD pins use intel_port_is_combophy/tc helper functions to distinguish between combophy/TC ports.
--- drivers/gpu/drm/i915/intel_dp.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +5 -10
@@ -4965,19 +4965,14 @@ static bool icl_digital_port_connected(struct intel_encoder *encoder)struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);struct intel_digital_port *dig_port =enc_to_dig_port (&encoder->base); -switch (encoder->hpd_pin) { -case HPD_PORT_A : -case HPD_PORT_B : +if (intel_port_is_combophy (dev_priv, encoder->port))return icl_combo_port_connected (dev_priv, dig_port); -case HPD_PORT_C : -case HPD_PORT_D : -case HPD_PORT_E : -case HPD_PORT_F : +else if (intel_port_is_tc (dev_priv, encoder->port))return icl_tc_port_connected (dev_priv, dig_port); -default : +else MISSING_CASE (encoder->hpd_pin); -return false; - } + +return false; }/*
Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/8] drm/i915/icl: use combophy/TC helper functions during display detection
Quoted 5 lines · Mahesh Kumar
Instead of directly comparing HPD pins use intel_port_is_combophy/tc helper functions to distinguish between combophy/TC ports.
Signed-off-by Mahesh Kumar <[email protected]>Cc Manasi Navare <[email protected]>
Quoted 40 lines
--- drivers/gpu/drm/i915/intel_dp.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-)drivers/gpu/drm/i915/intel_dp.c +5
-10@@ -4965,19 +4965,14 @@ static bool icl_digital_port_connected(struct intel_encoder *encoder)struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);struct intel_digital_port *dig_port =enc_to_dig_port (&encoder->base); -switch (encoder->hpd_pin) { -case HPD_PORT_A : -case HPD_PORT_B : +if (intel_port_is_combophy (dev_priv, encoder->port))return icl_combo_port_connected (dev_priv, dig_port); -case HPD_PORT_C : -case HPD_PORT_D : -case HPD_PORT_E : -case HPD_PORT_F : +else if (intel_port_is_tc (dev_priv, encoder->port))return icl_tc_port_connected (dev_priv, dig_port); -default : +else MISSING_CASE (encoder->hpd_pin); -return false; - } + +return false; }/* Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/8] drm/i915/icl: use combophy/TC helper functions during display detection
In reply to Mahesh KumarQuoted 6 lines · Mahesh Kumar
Instead of directly comparing HPD pins use intel_port_is_combophy/tc helper functions to distinguish between combophy/TC ports.
Signed-off-by Mahesh Kumar <[email protected]>Cc Manasi Navare <[email protected]>---
Quoted 39 lines
drivers/gpu/drm/i915/intel_dp.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-)drivers/gpu/drm/i915/intel_dp.c +5
-10@@ -4965,19 +4965,14 @@ static bool icl_digital_port_connected(struct intel_encoder *encoder)struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);struct intel_digital_port *dig_port =enc_to_dig_port (&encoder->base); -switch (encoder->hpd_pin) { -case HPD_PORT_A : -case HPD_PORT_B : +if (intel_port_is_combophy (dev_priv, encoder->port))return icl_combo_port_connected (dev_priv, dig_port); -case HPD_PORT_C : -case HPD_PORT_D : -case HPD_PORT_E : -case HPD_PORT_F : +else if (intel_port_is_tc (dev_priv, encoder->port))return icl_tc_port_connected (dev_priv, dig_port); -default : +else MISSING_CASE (encoder->hpd_pin); -return false; - } + +return false; }/* Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 3/8 drm/i915/icl: Refactor get_ddi_pll using helper func
In reply to Mahesh KumarFrom: Vandita Kulkarni <[email protected]>
Use the existing port-to-id helper function, to refactor hence making it scalable.
--- drivers/gpu/drm/i915/intel_display.c | 8 +------- drivers/gpu/drm/i915/intel_dpll_mgr.c | 2 +- drivers/gpu/drm/i915/intel_dpll_mgr.h | 1 + 3 files changed, 3 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/intel_display.c +1 -7
@@ -9307,16 +9307,10 @@ static void icelake_get_ddi_pll(struct drm_i915_private *dev_priv,return ;break ;case PORT_C : - id =DPLL_ID_ICL_MGPLL1 ; -break ;case PORT_D : - id =DPLL_ID_ICL_MGPLL2 ; -break ;case PORT_E : - id =DPLL_ID_ICL_MGPLL3 ; -break ;case PORT_F : - id =DPLL_ID_ICL_MGPLL4 ; + id =icl_port_to_mg_pll_id (port);break ;default :MISSING_CASE (port);
drivers/gpu/drm/i915/intel_dpll_mgr.c +1 -1
@@ -2628,7 +2628,7 @@ static enum port icl_mg_pll_id_to_port(enum intel_dpll_id id)return id -DPLL_ID_ICL_MGPLL1 +PORT_C ; } -static enum intel_dpll_id icl_port_to_mg_pll_id (enum port port) +enum intel_dpll_id icl_port_to_mg_pll_id (enum port port) {return port -PORT_C +DPLL_ID_ICL_MGPLL1 ; }
drivers/gpu/drm/i915/intel_dpll_mgr.h +1 -0
@@ -345,5 +345,6 @@ void intel_dpll_dump_hw_state(struct drm_i915_private *dev_priv,int icl_calc_dp_combo_pll_link (struct drm_i915_private *dev_priv,uint32_t pll_id);int cnl_hdmi_pll_ref_clock (struct drm_i915_private *dev_priv); +enum intel_dpll_id icl_port_to_mg_pll_id (enum port port);#endif /* _INTEL_DPLL_MGR_H_ */
Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 3/8] drm/i915/icl: Refactor get_ddi_pll using helper func
Quoted 9 lines · Mahesh Kumar
From: Vandita Kulkarni <[email protected]>
Use the existing port-to-id helper function, to refactor hence making it scalable.
Signed-off-by Vandita Kulkarni <[email protected]>Signed-off-by Mahesh Kumar <[email protected]>Cc Lucas De Marchi <[email protected]>Cc Madhav Chauhan <[email protected]>
Lucas De Marchi
Quoted 59 lines
--- drivers/gpu/drm/i915/intel_display.c | 8 +------- drivers/gpu/drm/i915/intel_dpll_mgr.c | 2 +- drivers/gpu/drm/i915/intel_dpll_mgr.h | 1 + 3 files changed, 3 insertions(+), 8 deletions(-)drivers/gpu/drm/i915/intel_display.c +1
-7@@ -9307,16 +9307,10 @@ static void icelake_get_ddi_pll(struct drm_i915_private *dev_priv,return ;break ;case PORT_C : - id =DPLL_ID_ICL_MGPLL1 ; -break ;case PORT_D : - id =DPLL_ID_ICL_MGPLL2 ; -break ;case PORT_E : - id =DPLL_ID_ICL_MGPLL3 ; -break ;case PORT_F : - id =DPLL_ID_ICL_MGPLL4 ; + id =icl_port_to_mg_pll_id (port);break ;default :MISSING_CASE (port);drivers/gpu/drm/i915/intel_dpll_mgr.c +1
-1@@ -2628,7 +2628,7 @@ static enum port icl_mg_pll_id_to_port(enum intel_dpll_id id)return id -DPLL_ID_ICL_MGPLL1 +PORT_C ; } -static enum intel_dpll_id icl_port_to_mg_pll_id (enum port port) +enum intel_dpll_id icl_port_to_mg_pll_id (enum port port) {return port -PORT_C +DPLL_ID_ICL_MGPLL1 ; }drivers/gpu/drm/i915/intel_dpll_mgr.h +1
-0@@ -345,5 +345,6 @@ void intel_dpll_dump_hw_state(struct drm_i915_private *dev_priv,int icl_calc_dp_combo_pll_link (struct drm_i915_private *dev_priv,uint32_t pll_id);int cnl_hdmi_pll_ref_clock (struct drm_i915_private *dev_priv); +enum intel_dpll_id icl_port_to_mg_pll_id (enum port port);#endif /* _INTEL_DPLL_MGR_H_ */ Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 4/8 drm/i915/icl: Use helper functions to classify the ports
In reply to Mahesh KumarFrom: Vandita Kulkarni <[email protected]>
Use intel_port_is_tc and intel_port_is_combophy
functions to replace the individual port checks
from port C to F and port A to B respectively.
--- drivers/gpu/drm/i915/intel_display.c | 15 ++++----------- drivers/gpu/drm/i915/intel_dpll_mgr.c | 14 ++++---------- 2 files changed, 8 insertions(+), 21 deletions(-)
drivers/gpu/drm/i915/intel_display.c +4 -11
@@ -9296,24 +9296,17 @@ static void icelake_get_ddi_pll(struct drm_i915_private *dev_priv,u32 temp;/* TODO: TBT pll not implemented. */ -switch (port) { -case PORT_A : -case PORT_B : +if (intel_port_is_combophy (dev_priv, port)) { temp =I915_READ (DPCLKA_CFGCR0_ICL ) &DPCLKA_CFGCR0_DDI_CLK_SEL_MASK (port); id = temp >>DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT (port);if (WARN_ON (id !=DPLL_ID_ICL_DPLL0 && id !=DPLL_ID_ICL_DPLL1 ))return ; -break ; -case PORT_C : -case PORT_D : -case PORT_E : -case PORT_F : + }else if (intel_port_is_tc (dev_priv, port)) { id =icl_port_to_mg_pll_id (port); -break ; -default : -MISSING_CASE (port); + }else { +WARN (1 ,"Invalid port %x\n" , port);return ; }
drivers/gpu/drm/i915/intel_dpll_mgr.c +4 -10
@@ -2874,6 +2874,7 @@ static struct intel_shared_dpll * icl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, struct intel_encoder *encoder) { + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);struct intel_digital_port *intel_dig_port =enc_to_dig_port (&encoder->base);struct intel_shared_dpll *pll;
@@ -2883,18 +2884,12 @@ icl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,int clock = crtc_state->port_clock;bool ret; -switch (port) { -case PORT_A : -case PORT_B : +if (intel_port_is_combophy (dev_priv, port)) { min =DPLL_ID_ICL_DPLL0 ; max =DPLL_ID_ICL_DPLL1 ; ret =icl_calc_dpll_state (crtc_state, encoder, clock, &pll_state); -break ; -case PORT_C : -case PORT_D : -case PORT_E : -case PORT_F : + }else if (intel_port_is_tc (dev_priv, port)) {if (intel_dig_port->tc_type ==TC_PORT_TBT ) { min =DPLL_ID_ICL_TBTPLL ; max = min;
@@ -2906,8 +2901,7 @@ icl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, ret =icl_calc_mg_pll_state (crtc_state, encoder, clock, &pll_state); } -break ; -default : + }else {MISSING_CASE (port);return NULL ; }
Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 4/8] drm/i915/icl: Use helper functions to classify the ports
Quoted 10 lines · Mahesh Kumar
From: Vandita Kulkarni <[email protected]>
Use
intel_port_is_tcandintel_port_is_combophy
functions to replace the individual port checks
from port C to F and port A to B respectively.Signed-off-by Vandita Kulkarni <[email protected]>Signed-off-by Mahesh Kumar <[email protected]>Cc Lucas De Marchi <[email protected]>Cc Madhav Chauhan <[email protected]>
Quoted 88 lines
--- drivers/gpu/drm/i915/intel_display.c | 15 ++++----------- drivers/gpu/drm/i915/intel_dpll_mgr.c | 14 ++++---------- 2 files changed, 8 insertions(+), 21 deletions(-)drivers/gpu/drm/i915/intel_display.c +4
-11@@ -9296,24 +9296,17 @@ static void icelake_get_ddi_pll(struct drm_i915_private *dev_priv,u32 temp;/* TODO: TBT pll not implemented. */ -switch (port) { -case PORT_A : -case PORT_B : +if (intel_port_is_combophy (dev_priv, port)) { temp =I915_READ (DPCLKA_CFGCR0_ICL ) &DPCLKA_CFGCR0_DDI_CLK_SEL_MASK (port); id = temp >>DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT (port);if (WARN_ON (id !=DPLL_ID_ICL_DPLL0 && id !=DPLL_ID_ICL_DPLL1 ))return ; -break ; -case PORT_C : -case PORT_D : -case PORT_E : -case PORT_F : + }else if (intel_port_is_tc (dev_priv, port)) { id =icl_port_to_mg_pll_id (port); -break ; -default : -MISSING_CASE (port); + }else { +WARN (1 ,"Invalid port %x\n" , port);return ; }drivers/gpu/drm/i915/intel_dpll_mgr.c +4
-10@@ -2874,6 +2874,7 @@ static struct intel_shared_dpll * icl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, struct intel_encoder *encoder) { + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);struct intel_digital_port *intel_dig_port =enc_to_dig_port (&encoder->base);struct intel_shared_dpll *pll;@@ -2883,18 +2884,12 @@ icl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,int clock = crtc_state->port_clock;bool ret; -switch (port) { -case PORT_A : -case PORT_B : +if (intel_port_is_combophy (dev_priv, port)) { min =DPLL_ID_ICL_DPLL0 ; max =DPLL_ID_ICL_DPLL1 ; ret =icl_calc_dpll_state (crtc_state, encoder, clock, &pll_state); -break ; -case PORT_C : -case PORT_D : -case PORT_E : -case PORT_F : + }else if (intel_port_is_tc (dev_priv, port)) {if (intel_dig_port->tc_type ==TC_PORT_TBT ) { min =DPLL_ID_ICL_TBTPLL ; max = min;@@ -2906,8 +2901,7 @@ icl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, ret =icl_calc_mg_pll_state (crtc_state, encoder, clock, &pll_state); } -break ; -default : + }else {MISSING_CASE (port);return NULL ; }Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 4/8] drm/i915/icl: Use helper functions to classify the ports
In reply to Mahesh KumarQuoted 10 lines · Mahesh Kumar
From: Vandita Kulkarni <[email protected]>
Use
intel_port_is_tcandintel_port_is_combophy
functions to replace the individual port checks
from port C to F and port A to B respectively.Signed-off-by Vandita Kulkarni <[email protected]>Signed-off-by Mahesh Kumar <[email protected]>Cc Lucas De Marchi <[email protected]>Cc Madhav Chauhan <[email protected]>
Lucas De Marchi
Quoted 88 lines
--- drivers/gpu/drm/i915/intel_display.c | 15 ++++----------- drivers/gpu/drm/i915/intel_dpll_mgr.c | 14 ++++---------- 2 files changed, 8 insertions(+), 21 deletions(-)drivers/gpu/drm/i915/intel_display.c +4
-11@@ -9296,24 +9296,17 @@ static void icelake_get_ddi_pll(struct drm_i915_private *dev_priv,u32 temp;/* TODO: TBT pll not implemented. */ -switch (port) { -case PORT_A : -case PORT_B : +if (intel_port_is_combophy (dev_priv, port)) { temp =I915_READ (DPCLKA_CFGCR0_ICL ) &DPCLKA_CFGCR0_DDI_CLK_SEL_MASK (port); id = temp >>DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT (port);if (WARN_ON (id !=DPLL_ID_ICL_DPLL0 && id !=DPLL_ID_ICL_DPLL1 ))return ; -break ; -case PORT_C : -case PORT_D : -case PORT_E : -case PORT_F : + }else if (intel_port_is_tc (dev_priv, port)) { id =icl_port_to_mg_pll_id (port); -break ; -default : -MISSING_CASE (port); + }else { +WARN (1 ,"Invalid port %x\n" , port);return ; }drivers/gpu/drm/i915/intel_dpll_mgr.c +4
-10@@ -2874,6 +2874,7 @@ static struct intel_shared_dpll * icl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, struct intel_encoder *encoder) { + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);struct intel_digital_port *intel_dig_port =enc_to_dig_port (&encoder->base);struct intel_shared_dpll *pll;@@ -2883,18 +2884,12 @@ icl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,int clock = crtc_state->port_clock;bool ret; -switch (port) { -case PORT_A : -case PORT_B : +if (intel_port_is_combophy (dev_priv, port)) { min =DPLL_ID_ICL_DPLL0 ; max =DPLL_ID_ICL_DPLL1 ; ret =icl_calc_dpll_state (crtc_state, encoder, clock, &pll_state); -break ; -case PORT_C : -case PORT_D : -case PORT_E : -case PORT_F : + }else if (intel_port_is_tc (dev_priv, port)) {if (intel_dig_port->tc_type ==TC_PORT_TBT ) { min =DPLL_ID_ICL_TBTPLL ; max = min;@@ -2906,8 +2901,7 @@ icl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, ret =icl_calc_mg_pll_state (crtc_state, encoder, clock, &pll_state); } -break ; -default : + }else {MISSING_CASE (port);return NULL ; }Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 5/8 drm/i915/icl: Refactor icl pll functions
In reply to Mahesh KumarFrom: Vandita Kulkarni <[email protected]>
This patch adds helper function for identifying
whether the given PLL is combo PHY PLL or not.
This helper function is used inside various ICL
functions to make them scalable.
--- drivers/gpu/drm/i915/intel_display.c | 2 +- drivers/gpu/drm/i915/intel_dpll_mgr.c | 54 +++++++++++------------------------ drivers/gpu/drm/i915/intel_dpll_mgr.h | 1 + 3 files changed, 19 insertions(+), 38 deletions(-)
drivers/gpu/drm/i915/intel_display.c +1 -1
@@ -9301,7 +9301,7 @@ static void icelake_get_ddi_pll(struct drm_i915_private *dev_priv,DPCLKA_CFGCR0_DDI_CLK_SEL_MASK (port); id = temp >>DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT (port); -if (WARN_ON (id !=DPLL_ID_ICL_DPLL0 && id !=DPLL_ID_ICL_DPLL1 )) +if (WARN_ON (!intel_dpll_is_combophy (id)))return ; }else if (intel_port_is_tc (dev_priv, port)) { id =icl_port_to_mg_pll_id (port);
drivers/gpu/drm/i915/intel_dpll_mgr.c +17 -37
91 lines not on this page · raw message
drivers/gpu/drm/i915/intel_dpll_mgr.h +1 -0
@@ -346,5 +346,6 @@ int icl_calc_dp_combo_pll_link(struct drm_i915_private *dev_priv, uint32_t pll_id);int cnl_hdmi_pll_ref_clock (struct drm_i915_private *dev_priv);enum intel_dpll_id icl_port_to_mg_pll_id (enum port port); +bool intel_dpll_is_combophy (enum intel_dpll_id id);#endif /* _INTEL_DPLL_MGR_H_ */
Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 5/8] drm/i915/icl: Refactor icl pll functions
Quoted 11 lines · Mahesh Kumar
From: Vandita Kulkarni <[email protected]>
This patch adds helper function for identifying
whether the given PLL is combo PHY PLL or not.
This helper function is used inside various ICL
functions to make them scalable.Signed-off-by Vandita Kulkarni <[email protected]>Signed-off-by Mahesh Kumar <[email protected]>Cc Madhav Chauhan <[email protected]>Cc Lucas De Marchi <[email protected]>
Lucas De Marchi
Quoted 137 lines
--- drivers/gpu/drm/i915/intel_display.c | 2 +- drivers/gpu/drm/i915/intel_dpll_mgr.c | 54 +++++++++++------------------------ drivers/gpu/drm/i915/intel_dpll_mgr.h | 1 + 3 files changed, 19 insertions(+), 38 deletions(-)drivers/gpu/drm/i915/intel_display.c +1
-1@@ -9301,7 +9301,7 @@ static void icelake_get_ddi_pll(struct drm_i915_private *dev_priv,DPCLKA_CFGCR0_DDI_CLK_SEL_MASK (port); id = temp >>DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT (port); -if (WARN_ON (id !=DPLL_ID_ICL_DPLL0 && id !=DPLL_ID_ICL_DPLL1 )) +if (WARN_ON (!intel_dpll_is_combophy (id)))return ; }else if (intel_port_is_tc (dev_priv, port)) { id =icl_port_to_mg_pll_id (port);drivers/gpu/drm/i915/intel_dpll_mgr.c +17
-37@@ -2633,6 +2633,11 @@ enum intel_dpll_id icl_port_to_mg_pll_id(enum port port)return port -PORT_C +DPLL_ID_ICL_MGPLL1 ; } +bool intel_dpll_is_combophy (enum intel_dpll_id id) +{ +return id ==DPLL_ID_ICL_DPLL0 || id ==DPLL_ID_ICL_DPLL1 ; +} +static bool icl_mg_pll_find_divisors (int clock_khz,bool is_dp,bool use_ssc,uint32_t *target_dco_khz,struct intel_dpll_hw_state *state)@@ -2926,21 +2931,16 @@ icl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,static i915_reg_t icl_pll_id_to_enable_reg (enum intel_dpll_id id) { -switch (id) { -default : -MISSING_CASE (id); -/* fall through */ -case DPLL_ID_ICL_DPLL0 : -case DPLL_ID_ICL_DPLL1 : +if (intel_dpll_is_combophy (id))return CNL_DPLL_ENABLE (id); -case DPLL_ID_ICL_TBTPLL : +else if (id ==DPLL_ID_ICL_TBTPLL )return TBT_PLL_ENABLE ; -case DPLL_ID_ICL_MGPLL1 : -case DPLL_ID_ICL_MGPLL2 : -case DPLL_ID_ICL_MGPLL3 : -case DPLL_ID_ICL_MGPLL4 : +else +/* +* TODO: Make MG_PLL macros use +* tc port id instead of port id +*/ return MG_PLL_ENABLE (icl_mg_pll_id_to_port (id)); - } } static bool icl_pll_get_hw_state(struct drm_i915_private *dev_priv,@@ -2959,17 +2959,11 @@ static bool icl_pll_get_hw_state(struct drm_i915_private *dev_priv,if (!(val &PLL_ENABLE )) goto out; -switch (id) { -case DPLL_ID_ICL_DPLL0 : -case DPLL_ID_ICL_DPLL1 : -case DPLL_ID_ICL_TBTPLL : +if (intel_dpll_is_combophy (id) || + id ==DPLL_ID_ICL_TBTPLL ) { hw_state->cfgcr0 =I915_READ (ICL_DPLL_CFGCR0 (id)); hw_state->cfgcr1 =I915_READ (ICL_DPLL_CFGCR1 (id)); -break ; -case DPLL_ID_ICL_MGPLL1 : -case DPLL_ID_ICL_MGPLL2 : -case DPLL_ID_ICL_MGPLL3 : -case DPLL_ID_ICL_MGPLL4 : + }else { port =icl_mg_pll_id_to_port (id); hw_state->mg_refclkin_ctl =I915_READ (MG_REFCLKIN_CTL (port)); hw_state->mg_refclkin_ctl &=MG_REFCLKIN_CTL_OD_2_MUX_MASK ;@@ -3007,9 +3001,6 @@ static bool icl_pll_get_hw_state(struct drm_i915_private *dev_priv, hw_state->mg_pll_tdc_coldst_bias &= hw_state->mg_pll_tdc_coldst_bias_mask; hw_state->mg_pll_bias &= hw_state->mg_pll_bias_mask; -break ; -default : -MISSING_CASE (id); } ret = true;@@ -3098,21 +3089,10 @@ static void icl_pll_enable(struct drm_i915_private *dev_priv, PLL_POWER_STATE, 1))DRM_ERROR ("PLL %d Power not enabled\n" , id); -switch (id) { -case DPLL_ID_ICL_DPLL0 : -case DPLL_ID_ICL_DPLL1 : -case DPLL_ID_ICL_TBTPLL : +if (intel_dpll_is_combophy (id) || id ==DPLL_ID_ICL_TBTPLL )icl_dpll_write (dev_priv, pll); -break ; -case DPLL_ID_ICL_MGPLL1 : -case DPLL_ID_ICL_MGPLL2 : -case DPLL_ID_ICL_MGPLL3 : -case DPLL_ID_ICL_MGPLL4 : +else icl_mg_pll_write (dev_priv, pll); -break ; -default : -MISSING_CASE (id); - }/* * DVFS pre sequence would be here, but in our driver the cdclk code drivers/gpu/drm/i915/intel_dpll_mgr.h +1
-0@@ -346,5 +346,6 @@ int icl_calc_dp_combo_pll_link(struct drm_i915_private *dev_priv, uint32_t pll_id);int cnl_hdmi_pll_ref_clock (struct drm_i915_private *dev_priv);enum intel_dpll_id icl_port_to_mg_pll_id (enum port port); +bool intel_dpll_is_combophy (enum intel_dpll_id id);#endif /* _INTEL_DPLL_MGR_H_ */ Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 6/8 drm/i915/icl: Combine all port/combophy macros at one place
In reply to Mahesh KumarThis patch combines CNL/ICL specific port/combophy macros together at one location. This is prework for patches later in series where new macros to find port/combophy register will be introduced.
--- drivers/gpu/drm/i915/i915_reg.h | 138 +++++++++++++++++++++------------------- 1 file changed, 73 insertions(+), 65 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +73 -65
@@ -1631,14 +1631,42 @@ enum i915_power_well_id {#define PHY_RESERVED (1 << 7)#define BXT_PORT_CL1CM_DW0 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW0_BC) -#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014) -#define CL_POWER_DOWN_ENABLE (1 << 4) -#define SUS_CLOCK_CONFIG (3 << 0) +#define _PORT_CL1CM_DW9_A 0x162024 +#define _PORT_CL1CM_DW9_BC 0x6C024 +#define IREF0RC_OFFSET_SHIFT 8 +#define IREF0RC_OFFSET_MASK (0xFF << IREF0RC_OFFSET_SHIFT) +#define BXT_PORT_CL1CM_DW9 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW9_BC) + +#define _PORT_CL1CM_DW10_A 0x162028 +#define _PORT_CL1CM_DW10_BC 0x6C028 +#define IREF1RC_OFFSET_SHIFT 8 +#define IREF1RC_OFFSET_MASK (0xFF << IREF1RC_OFFSET_SHIFT) +#define BXT_PORT_CL1CM_DW10 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW10_BC) + +#define _PORT_CL1CM_DW28_A 0x162070 +#define _PORT_CL1CM_DW28_BC 0x6C070 +#define OCL1_POWER_DOWN_EN (1 << 23) +#define DW28_OLDO_DYN_PWR_DOWN_EN (1 << 22) +#define SUS_CLK_CONFIG 0x3 +#define BXT_PORT_CL1CM_DW28 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW28_BC) + +#define _PORT_CL1CM_DW30_A 0x162078 +#define _PORT_CL1CM_DW30_BC 0x6C078 +#define OCL2_LDOFUSE_PWR_DIS (1 << 6) +#define BXT_PORT_CL1CM_DW30 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW30_BC) + +/* +* CNL/ICL Port/COMBO-PHY Registers +*/ +/* CNL/ICL Port CL_DW registers */ +#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014)#define _ICL_PORT_CL_DW5_A 0x162014#define _ICL_PORT_CL_DW5_B 0x6C014#define ICL_PORT_CL_DW5 (port) _MMIO_PORT(port, _ICL_PORT_CL_DW5_A, \ _ICL_PORT_CL_DW5_B) +#define CL_POWER_DOWN_ENABLE (1 << 4) +#define SUS_CLOCK_CONFIG (3 << 0)#define _CNL_PORT_CL_DW10_A 0x162028#define _ICL_PORT_CL_DW10_B 0x6c028
@@ -1660,18 +1688,6 @@ enum i915_power_well_id {#define PWR_DOWN_LN_MASK (0xf << 4)#define PWR_DOWN_LN_SHIFT 4 -#define _PORT_CL1CM_DW9_A 0x162024 -#define _PORT_CL1CM_DW9_BC 0x6C024 -#define IREF0RC_OFFSET_SHIFT 8 -#define IREF0RC_OFFSET_MASK (0xFF << IREF0RC_OFFSET_SHIFT) -#define BXT_PORT_CL1CM_DW9 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW9_BC) - -#define _PORT_CL1CM_DW10_A 0x162028 -#define _PORT_CL1CM_DW10_BC 0x6C028 -#define IREF1RC_OFFSET_SHIFT 8 -#define IREF1RC_OFFSET_MASK (0xFF << IREF1RC_OFFSET_SHIFT) -#define BXT_PORT_CL1CM_DW10 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW10_BC) -#define _ICL_PORT_CL_DW12_A 0x162030#define _ICL_PORT_CL_DW12_B 0x6C030#define ICL_LANE_ENABLE_AUX (1 << 0)
@@ -1679,18 +1695,49 @@ enum i915_power_well_id { _ICL_PORT_CL_DW12_A, \ _ICL_PORT_CL_DW12_B) -#define _PORT_CL1CM_DW28_A 0x162070 -#define _PORT_CL1CM_DW28_BC 0x6C070 -#define OCL1_POWER_DOWN_EN (1 << 23) -#define DW28_OLDO_DYN_PWR_DOWN_EN (1 << 22) -#define SUS_CLK_CONFIG 0x3 -#define BXT_PORT_CL1CM_DW28 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW28_BC) +/* CNL/ICL Port COMP_DW registers */ +#define CNL_PORT_COMP_DW0 _MMIO(0x162100) +#define _ICL_PORT_COMP_DW0_A 0x162100 +#define _ICL_PORT_COMP_DW0_B 0x6C100 +#define ICL_PORT_COMP_DW0 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW0_A, \ + _ICL_PORT_COMP_DW0_B) +#define COMP_INIT (1 << 31) -#define _PORT_CL1CM_DW30_A 0x162078 -#define _PORT_CL1CM_DW30_BC 0x6C078 -#define OCL2_LDOFUSE_PWR_DIS (1 << 6) -#define BXT_PORT_CL1CM_DW30 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW30_BC) +#define CNL_PORT_COMP_DW1 _MMIO(0x162104) +#define _ICL_PORT_COMP_DW1_A 0x162104 +#define _ICL_PORT_COMP_DW1_B 0x6C104 +#define ICL_PORT_COMP_DW1 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW1_A, \ + _ICL_PORT_COMP_DW1_B) +#define CNL_PORT_COMP_DW3 _MMIO(0x16210c) +#define _ICL_PORT_COMP_DW3_A 0x16210C +#define _ICL_PORT_COMP_DW3_B 0x6C10C +#define ICL_PORT_COMP_DW3 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW3_A, \ + _ICL_PORT_COMP_DW3_B) +#define PROCESS_INFO_DOT_0 (0 << 26) +#define PROCESS_INFO_DOT_1 (1 << 26) +#define PROCESS_INFO_DOT_4 (2 << 26) +#define PROCESS_INFO_MASK (7 << 26) +#define PROCESS_INFO_SHIFT 26 +#define VOLTAGE_INFO_0_85V (0 << 24) +#define VOLTAGE_INFO_0_95V (1 << 24) +#define VOLTAGE_INFO_1_05V (2 << 24) +#define VOLTAGE_INFO_MASK (3 << 24) +#define VOLTAGE_INFO_SHIFT 24 +#define CNL_PORT_COMP_DW9 _MMIO(0x162124) +#define _ICL_PORT_COMP_DW9_A 0x162124 +#define _ICL_PORT_COMP_DW9_B 0x6C124 +#define ICL_PORT_COMP_DW9 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW9_A, \ + _ICL_PORT_COMP_DW9_B) + +#define CNL_PORT_COMP_DW10 _MMIO(0x162128) +#define _ICL_PORT_COMP_DW10_A 0x162128 +#define _ICL_PORT_COMP_DW10_B 0x6C128 +#define ICL_PORT_COMP_DW10 (port) _MMIO_PORT(port, \ + _ICL_PORT_COMP_DW10_A, \ + _ICL_PORT_COMP_DW10_B) + +/* CNL/ICL Port PCS registers */ #define _CNL_PORT_PCS_DW1_GRP_AE 0x162304#define _CNL_PORT_PCS_DW1_GRP_B 0x162384#define _CNL_PORT_PCS_DW1_GRP_C 0x162B04
@@ -1734,7 +1781,7 @@ enum i915_power_well_id { _ICL_PORT_PCS_DW1_AUX_B)#define COMMON_KEEPER_EN (1 << 26) -/* CNL Port TX registers */ +/* CNL/ICL Port TX registers */ #define _CNL_PORT_TX_AE_GRP_OFFSET 0x162340#define _CNL_PORT_TX_B_GRP_OFFSET 0x1623C0#define _CNL_PORT_TX_C_GRP_OFFSET 0x162B40
@@ -2054,45 +2101,6 @@ enum i915_power_well_id {#define BXT_PORT_CL2CM_DW6 (phy) _BXT_PHY((phy), _PORT_CL2CM_DW6_BC)#define DW6_OLDO_DYN_PWR_DOWN_EN (1 << 28) -#define CNL_PORT_COMP_DW0 _MMIO(0x162100) -#define COMP_INIT (1 << 31) -#define CNL_PORT_COMP_DW1 _MMIO(0x162104) -#define CNL_PORT_COMP_DW3 _MMIO(0x16210c) -#define PROCESS_INFO_DOT_0 (0 << 26) -#define PROCESS_INFO_DOT_1 (1 << 26) -#define PROCESS_INFO_DOT_4 (2 << 26) -#define PROCESS_INFO_MASK (7 << 26) -#define PROCESS_INFO_SHIFT 26 -#define VOLTAGE_INFO_0_85V (0 << 24) -#define VOLTAGE_INFO_0_95V (1 << 24) -#define VOLTAGE_INFO_1_05V (2 << 24) -#define VOLTAGE_INFO_MASK (3 << 24) -#define VOLTAGE_INFO_SHIFT 24 -#define CNL_PORT_COMP_DW9 _MMIO(0x162124) -#define CNL_PORT_COMP_DW10 _MMIO(0x162128) - -#define _ICL_PORT_COMP_DW0_A 0x162100 -#define _ICL_PORT_COMP_DW0_B 0x6C100 -#define ICL_PORT_COMP_DW0 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW0_A, \ - _ICL_PORT_COMP_DW0_B) -#define _ICL_PORT_COMP_DW1_A 0x162104 -#define _ICL_PORT_COMP_DW1_B 0x6C104 -#define ICL_PORT_COMP_DW1 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW1_A, \ - _ICL_PORT_COMP_DW1_B) -#define _ICL_PORT_COMP_DW3_A 0x16210C -#define _ICL_PORT_COMP_DW3_B 0x6C10C -#define ICL_PORT_COMP_DW3 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW3_A, \ - _ICL_PORT_COMP_DW3_B) -#define _ICL_PORT_COMP_DW9_A 0x162124 -#define _ICL_PORT_COMP_DW9_B 0x6C124 -#define ICL_PORT_COMP_DW9 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW9_A, \ - _ICL_PORT_COMP_DW9_B) -#define _ICL_PORT_COMP_DW10_A 0x162128 -#define _ICL_PORT_COMP_DW10_B 0x6C128 -#define ICL_PORT_COMP_DW10 (port) _MMIO_PORT(port, \ - _ICL_PORT_COMP_DW10_A, \ - _ICL_PORT_COMP_DW10_B) -/* ICL PHY DFLEX registers */ #define PORT_TX_DFLEXDPMLE1 _MMIO(0x1638C0)#define DFLEXDPMLE1_DPMLETC_MASK (n) (0xf << (4 * (n)))
Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 6/8] drm/i915/icl: Combine all port/combophy macros at one place
Quoted 41 lines · Mahesh Kumar
This patch combines CNL/ICL specific port/combophy macros together at one location. This is prework for patches later in series where new macros to find port/combophy register will be introduced.
Signed-off-by Mahesh Kumar <[email protected]>Signed-off-by Lucas De Marchi <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 138 +++++++++++++++++++++------------------- 1 file changed, 73 insertions(+), 65 deletions(-)drivers/gpu/drm/i915/i915_reg.h +20
-3@@ -1631,14 +1631,42 @@ enum i915_power_well_id {#define PHY_RESERVED (1 << 7)#define BXT_PORT_CL1CM_DW0 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW0_BC) -#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014) -#define CL_POWER_DOWN_ENABLE (1 << 4) -#define SUS_CLOCK_CONFIG (3 << 0) +#define _PORT_CL1CM_DW9_A 0x162024 +#define _PORT_CL1CM_DW9_BC 0x6C024 +#define IREF0RC_OFFSET_SHIFT 8 +#define IREF0RC_OFFSET_MASK (0xFF << IREF0RC_OFFSET_SHIFT) +#define BXT_PORT_CL1CM_DW9 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW9_BC) + +#define _PORT_CL1CM_DW10_A 0x162028 +#define _PORT_CL1CM_DW10_BC 0x6C028 +#define IREF1RC_OFFSET_SHIFT 8 +#define IREF1RC_OFFSET_MASK (0xFF << IREF1RC_OFFSET_SHIFT) +#define BXT_PORT_CL1CM_DW10 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW10_BC) + +#define _PORT_CL1CM_DW28_A 0x162070 +#define _PORT_CL1CM_DW28_BC 0x6C070 +#define OCL1_POWER_DOWN_EN (1 << 23) +#define DW28_OLDO_DYN_PWR_DOWN_EN (1 << 22) +#define SUS_CLK_CONFIG 0x3 +#define BXT_PORT_CL1CM_DW28 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW28_BC) + +#define _PORT_CL1CM_DW30_A 0x162078
drivers/gpu/drm/i915/i915_reg.h enum i915_power_well_id { · line 1663
Quoted 10 lines
drivers/gpu/drm/i915/i915_reg.h +9
-0+#define _PORT_CL1CM_DW30_BC 0x6C078 +#define OCL2_LDOFUSE_PWR_DIS (1 << 6) +#define BXT_PORT_CL1CM_DW30 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW30_BC) + +/* +* CNL/ICL Port/COMBO-PHY Registers +*/ +/* CNL/ICL Port CL_DW registers */ +#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014)
We need to remove this empty line here or it seems the bits for this reg is not defined.
The rest looks good to me,
Quoted 150 lines
drivers/gpu/drm/i915/i915_reg.h +44
-62#define _ICL_PORT_CL_DW5_A 0x162014#define _ICL_PORT_CL_DW5_B 0x6C014#define ICL_PORT_CL_DW5 (port) _MMIO_PORT(port, _ICL_PORT_CL_DW5_A, \ _ICL_PORT_CL_DW5_B) +#define CL_POWER_DOWN_ENABLE (1 << 4) +#define SUS_CLOCK_CONFIG (3 << 0)#define _CNL_PORT_CL_DW10_A 0x162028#define _ICL_PORT_CL_DW10_B 0x6c028@@ -1660,18 +1688,6 @@ enum i915_power_well_id {#define PWR_DOWN_LN_MASK (0xf << 4)#define PWR_DOWN_LN_SHIFT 4 -#define _PORT_CL1CM_DW9_A 0x162024 -#define _PORT_CL1CM_DW9_BC 0x6C024 -#define IREF0RC_OFFSET_SHIFT 8 -#define IREF0RC_OFFSET_MASK (0xFF << IREF0RC_OFFSET_SHIFT) -#define BXT_PORT_CL1CM_DW9 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW9_BC) - -#define _PORT_CL1CM_DW10_A 0x162028 -#define _PORT_CL1CM_DW10_BC 0x6C028 -#define IREF1RC_OFFSET_SHIFT 8 -#define IREF1RC_OFFSET_MASK (0xFF << IREF1RC_OFFSET_SHIFT) -#define BXT_PORT_CL1CM_DW10 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW10_BC) -#define _ICL_PORT_CL_DW12_A 0x162030#define _ICL_PORT_CL_DW12_B 0x6C030#define ICL_LANE_ENABLE_AUX (1 << 0)@@ -1679,18 +1695,49 @@ enum i915_power_well_id { _ICL_PORT_CL_DW12_A, \ _ICL_PORT_CL_DW12_B) -#define _PORT_CL1CM_DW28_A 0x162070 -#define _PORT_CL1CM_DW28_BC 0x6C070 -#define OCL1_POWER_DOWN_EN (1 << 23) -#define DW28_OLDO_DYN_PWR_DOWN_EN (1 << 22) -#define SUS_CLK_CONFIG 0x3 -#define BXT_PORT_CL1CM_DW28 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW28_BC) +/* CNL/ICL Port COMP_DW registers */ +#define CNL_PORT_COMP_DW0 _MMIO(0x162100) +#define _ICL_PORT_COMP_DW0_A 0x162100 +#define _ICL_PORT_COMP_DW0_B 0x6C100 +#define ICL_PORT_COMP_DW0 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW0_A, \ + _ICL_PORT_COMP_DW0_B) +#define COMP_INIT (1 << 31) -#define _PORT_CL1CM_DW30_A 0x162078 -#define _PORT_CL1CM_DW30_BC 0x6C078 -#define OCL2_LDOFUSE_PWR_DIS (1 << 6) -#define BXT_PORT_CL1CM_DW30 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW30_BC) +#define CNL_PORT_COMP_DW1 _MMIO(0x162104) +#define _ICL_PORT_COMP_DW1_A 0x162104 +#define _ICL_PORT_COMP_DW1_B 0x6C104 +#define ICL_PORT_COMP_DW1 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW1_A, \ + _ICL_PORT_COMP_DW1_B) +#define CNL_PORT_COMP_DW3 _MMIO(0x16210c) +#define _ICL_PORT_COMP_DW3_A 0x16210C +#define _ICL_PORT_COMP_DW3_B 0x6C10C +#define ICL_PORT_COMP_DW3 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW3_A, \ + _ICL_PORT_COMP_DW3_B) +#define PROCESS_INFO_DOT_0 (0 << 26) +#define PROCESS_INFO_DOT_1 (1 << 26) +#define PROCESS_INFO_DOT_4 (2 << 26) +#define PROCESS_INFO_MASK (7 << 26) +#define PROCESS_INFO_SHIFT 26 +#define VOLTAGE_INFO_0_85V (0 << 24) +#define VOLTAGE_INFO_0_95V (1 << 24) +#define VOLTAGE_INFO_1_05V (2 << 24) +#define VOLTAGE_INFO_MASK (3 << 24) +#define VOLTAGE_INFO_SHIFT 24 +#define CNL_PORT_COMP_DW9 _MMIO(0x162124) +#define _ICL_PORT_COMP_DW9_A 0x162124 +#define _ICL_PORT_COMP_DW9_B 0x6C124 +#define ICL_PORT_COMP_DW9 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW9_A, \ + _ICL_PORT_COMP_DW9_B) + +#define CNL_PORT_COMP_DW10 _MMIO(0x162128) +#define _ICL_PORT_COMP_DW10_A 0x162128 +#define _ICL_PORT_COMP_DW10_B 0x6C128 +#define ICL_PORT_COMP_DW10 (port) _MMIO_PORT(port, \ + _ICL_PORT_COMP_DW10_A, \ + _ICL_PORT_COMP_DW10_B) + +/* CNL/ICL Port PCS registers */ #define _CNL_PORT_PCS_DW1_GRP_AE 0x162304#define _CNL_PORT_PCS_DW1_GRP_B 0x162384#define _CNL_PORT_PCS_DW1_GRP_C 0x162B04@@ -1734,7 +1781,7 @@ enum i915_power_well_id { _ICL_PORT_PCS_DW1_AUX_B)#define COMMON_KEEPER_EN (1 << 26) -/* CNL Port TX registers */ +/* CNL/ICL Port TX registers */ #define _CNL_PORT_TX_AE_GRP_OFFSET 0x162340#define _CNL_PORT_TX_B_GRP_OFFSET 0x1623C0#define _CNL_PORT_TX_C_GRP_OFFSET 0x162B40@@ -2054,45 +2101,6 @@ enum i915_power_well_id {#define BXT_PORT_CL2CM_DW6 (phy) _BXT_PHY((phy), _PORT_CL2CM_DW6_BC)#define DW6_OLDO_DYN_PWR_DOWN_EN (1 << 28) -#define CNL_PORT_COMP_DW0 _MMIO(0x162100) -#define COMP_INIT (1 << 31) -#define CNL_PORT_COMP_DW1 _MMIO(0x162104) -#define CNL_PORT_COMP_DW3 _MMIO(0x16210c) -#define PROCESS_INFO_DOT_0 (0 << 26) -#define PROCESS_INFO_DOT_1 (1 << 26) -#define PROCESS_INFO_DOT_4 (2 << 26) -#define PROCESS_INFO_MASK (7 << 26) -#define PROCESS_INFO_SHIFT 26 -#define VOLTAGE_INFO_0_85V (0 << 24) -#define VOLTAGE_INFO_0_95V (1 << 24) -#define VOLTAGE_INFO_1_05V (2 << 24) -#define VOLTAGE_INFO_MASK (3 << 24) -#define VOLTAGE_INFO_SHIFT 24 -#define CNL_PORT_COMP_DW9 _MMIO(0x162124) -#define CNL_PORT_COMP_DW10 _MMIO(0x162128) - -#define _ICL_PORT_COMP_DW0_A 0x162100 -#define _ICL_PORT_COMP_DW0_B 0x6C100 -#define ICL_PORT_COMP_DW0 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW0_A, \ - _ICL_PORT_COMP_DW0_B) -#define _ICL_PORT_COMP_DW1_A 0x162104 -#define _ICL_PORT_COMP_DW1_B 0x6C104 -#define ICL_PORT_COMP_DW1 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW1_A, \ - _ICL_PORT_COMP_DW1_B) -#define _ICL_PORT_COMP_DW3_A 0x16210C -#define _ICL_PORT_COMP_DW3_B 0x6C10C -#define ICL_PORT_COMP_DW3 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW3_A, \ - _ICL_PORT_COMP_DW3_B) -#define _ICL_PORT_COMP_DW9_A 0x162124 -#define _ICL_PORT_COMP_DW9_B 0x6C124 -#define ICL_PORT_COMP_DW9 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW9_A, \ - _ICL_PORT_COMP_DW9_B) -#define _ICL_PORT_COMP_DW10_A 0x162128 -#define _ICL_PORT_COMP_DW10_B 0x6C128 -#define ICL_PORT_COMP_DW10 (port) _MMIO_PORT(port, \ - _ICL_PORT_COMP_DW10_A, \ - _ICL_PORT_COMP_DW10_B) -/* ICL PHY DFLEX registers */ #define PORT_TX_DFLEXDPMLE1 _MMIO(0x1638C0)#define DFLEXDPMLE1_DPMLETC_MASK (n) (0xf << (4 * (n)))Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 1/1 drm/i915/icl: Combine all port/combophy macros at one place
From: Mahesh Kumar <[email protected]>
This patch combines CNL/ICL specific port/combophy macros together at one location. This is prework for patches later in series where new macros to find port/combophy register will be introduced.
v2: remove wrong empty line
--- drivers/gpu/drm/i915/i915_reg.h | 137 +++++++++++++++++--------------- 1 file changed, 72 insertions(+), 65 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +72 -65
@@ -1631,14 +1631,41 @@ enum i915_power_well_id {#define PHY_RESERVED (1 << 7)#define BXT_PORT_CL1CM_DW0 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW0_BC) -#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014) -#define CL_POWER_DOWN_ENABLE (1 << 4) -#define SUS_CLOCK_CONFIG (3 << 0) +#define _PORT_CL1CM_DW9_A 0x162024 +#define _PORT_CL1CM_DW9_BC 0x6C024 +#define IREF0RC_OFFSET_SHIFT 8 +#define IREF0RC_OFFSET_MASK (0xFF << IREF0RC_OFFSET_SHIFT) +#define BXT_PORT_CL1CM_DW9 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW9_BC) +#define _PORT_CL1CM_DW10_A 0x162028 +#define _PORT_CL1CM_DW10_BC 0x6C028 +#define IREF1RC_OFFSET_SHIFT 8 +#define IREF1RC_OFFSET_MASK (0xFF << IREF1RC_OFFSET_SHIFT) +#define BXT_PORT_CL1CM_DW10 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW10_BC) + +#define _PORT_CL1CM_DW28_A 0x162070 +#define _PORT_CL1CM_DW28_BC 0x6C070 +#define OCL1_POWER_DOWN_EN (1 << 23) +#define DW28_OLDO_DYN_PWR_DOWN_EN (1 << 22) +#define SUS_CLK_CONFIG 0x3 +#define BXT_PORT_CL1CM_DW28 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW28_BC) + +#define _PORT_CL1CM_DW30_A 0x162078 +#define _PORT_CL1CM_DW30_BC 0x6C078 +#define OCL2_LDOFUSE_PWR_DIS (1 << 6) +#define BXT_PORT_CL1CM_DW30 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW30_BC) + +/* +* CNL/ICL Port/COMBO-PHY Registers +*/ +/* CNL/ICL Port CL_DW registers */ +#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014)#define _ICL_PORT_CL_DW5_A 0x162014#define _ICL_PORT_CL_DW5_B 0x6C014#define ICL_PORT_CL_DW5 (port) _MMIO_PORT(port, _ICL_PORT_CL_DW5_A, \ _ICL_PORT_CL_DW5_B) +#define CL_POWER_DOWN_ENABLE (1 << 4) +#define SUS_CLOCK_CONFIG (3 << 0)#define _CNL_PORT_CL_DW10_A 0x162028#define _ICL_PORT_CL_DW10_B 0x6c028
@@ -1660,18 +1687,6 @@ enum i915_power_well_id {#define PWR_DOWN_LN_MASK (0xf << 4)#define PWR_DOWN_LN_SHIFT 4 -#define _PORT_CL1CM_DW9_A 0x162024 -#define _PORT_CL1CM_DW9_BC 0x6C024 -#define IREF0RC_OFFSET_SHIFT 8 -#define IREF0RC_OFFSET_MASK (0xFF << IREF0RC_OFFSET_SHIFT) -#define BXT_PORT_CL1CM_DW9 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW9_BC) - -#define _PORT_CL1CM_DW10_A 0x162028 -#define _PORT_CL1CM_DW10_BC 0x6C028 -#define IREF1RC_OFFSET_SHIFT 8 -#define IREF1RC_OFFSET_MASK (0xFF << IREF1RC_OFFSET_SHIFT) -#define BXT_PORT_CL1CM_DW10 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW10_BC) -#define _ICL_PORT_CL_DW12_A 0x162030#define _ICL_PORT_CL_DW12_B 0x6C030#define ICL_LANE_ENABLE_AUX (1 << 0)
@@ -1679,18 +1694,49 @@ enum i915_power_well_id { _ICL_PORT_CL_DW12_A, \ _ICL_PORT_CL_DW12_B) -#define _PORT_CL1CM_DW28_A 0x162070 -#define _PORT_CL1CM_DW28_BC 0x6C070 -#define OCL1_POWER_DOWN_EN (1 << 23) -#define DW28_OLDO_DYN_PWR_DOWN_EN (1 << 22) -#define SUS_CLK_CONFIG 0x3 -#define BXT_PORT_CL1CM_DW28 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW28_BC) +/* CNL/ICL Port COMP_DW registers */ +#define CNL_PORT_COMP_DW0 _MMIO(0x162100) +#define _ICL_PORT_COMP_DW0_A 0x162100 +#define _ICL_PORT_COMP_DW0_B 0x6C100 +#define ICL_PORT_COMP_DW0 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW0_A, \ + _ICL_PORT_COMP_DW0_B) +#define COMP_INIT (1 << 31) -#define _PORT_CL1CM_DW30_A 0x162078 -#define _PORT_CL1CM_DW30_BC 0x6C078 -#define OCL2_LDOFUSE_PWR_DIS (1 << 6) -#define BXT_PORT_CL1CM_DW30 (phy) _BXT_PHY((phy), _PORT_CL1CM_DW30_BC) +#define CNL_PORT_COMP_DW1 _MMIO(0x162104) +#define _ICL_PORT_COMP_DW1_A 0x162104 +#define _ICL_PORT_COMP_DW1_B 0x6C104 +#define ICL_PORT_COMP_DW1 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW1_A, \ + _ICL_PORT_COMP_DW1_B) +#define CNL_PORT_COMP_DW3 _MMIO(0x16210c) +#define _ICL_PORT_COMP_DW3_A 0x16210C +#define _ICL_PORT_COMP_DW3_B 0x6C10C +#define ICL_PORT_COMP_DW3 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW3_A, \ + _ICL_PORT_COMP_DW3_B) +#define PROCESS_INFO_DOT_0 (0 << 26) +#define PROCESS_INFO_DOT_1 (1 << 26) +#define PROCESS_INFO_DOT_4 (2 << 26) +#define PROCESS_INFO_MASK (7 << 26) +#define PROCESS_INFO_SHIFT 26 +#define VOLTAGE_INFO_0_85V (0 << 24) +#define VOLTAGE_INFO_0_95V (1 << 24) +#define VOLTAGE_INFO_1_05V (2 << 24) +#define VOLTAGE_INFO_MASK (3 << 24) +#define VOLTAGE_INFO_SHIFT 24 + +#define CNL_PORT_COMP_DW9 _MMIO(0x162124) +#define _ICL_PORT_COMP_DW9_A 0x162124 +#define _ICL_PORT_COMP_DW9_B 0x6C124 +#define ICL_PORT_COMP_DW9 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW9_A, \ + _ICL_PORT_COMP_DW9_B) + +#define CNL_PORT_COMP_DW10 _MMIO(0x162128) +#define _ICL_PORT_COMP_DW10_A 0x162128 +#define _ICL_PORT_COMP_DW10_B 0x6C128 +#define ICL_PORT_COMP_DW10 (port) _MMIO_PORT(port, \ + _ICL_PORT_COMP_DW10_A, \ + _ICL_PORT_COMP_DW10_B) +/* CNL/ICL Port PCS registers */ #define _CNL_PORT_PCS_DW1_GRP_AE 0x162304#define _CNL_PORT_PCS_DW1_GRP_B 0x162384#define _CNL_PORT_PCS_DW1_GRP_C 0x162B04
@@ -1734,7 +1780,7 @@ enum i915_power_well_id { _ICL_PORT_PCS_DW1_AUX_B)#define COMMON_KEEPER_EN (1 << 26) -/* CNL Port TX registers */ +/* CNL/ICL Port TX registers */ #define _CNL_PORT_TX_AE_GRP_OFFSET 0x162340#define _CNL_PORT_TX_B_GRP_OFFSET 0x1623C0#define _CNL_PORT_TX_C_GRP_OFFSET 0x162B40
@@ -2054,45 +2100,6 @@ enum i915_power_well_id {#define BXT_PORT_CL2CM_DW6 (phy) _BXT_PHY((phy), _PORT_CL2CM_DW6_BC)#define DW6_OLDO_DYN_PWR_DOWN_EN (1 << 28) -#define CNL_PORT_COMP_DW0 _MMIO(0x162100) -#define COMP_INIT (1 << 31) -#define CNL_PORT_COMP_DW1 _MMIO(0x162104) -#define CNL_PORT_COMP_DW3 _MMIO(0x16210c) -#define PROCESS_INFO_DOT_0 (0 << 26) -#define PROCESS_INFO_DOT_1 (1 << 26) -#define PROCESS_INFO_DOT_4 (2 << 26) -#define PROCESS_INFO_MASK (7 << 26) -#define PROCESS_INFO_SHIFT 26 -#define VOLTAGE_INFO_0_85V (0 << 24) -#define VOLTAGE_INFO_0_95V (1 << 24) -#define VOLTAGE_INFO_1_05V (2 << 24) -#define VOLTAGE_INFO_MASK (3 << 24) -#define VOLTAGE_INFO_SHIFT 24 -#define CNL_PORT_COMP_DW9 _MMIO(0x162124) -#define CNL_PORT_COMP_DW10 _MMIO(0x162128) - -#define _ICL_PORT_COMP_DW0_A 0x162100 -#define _ICL_PORT_COMP_DW0_B 0x6C100 -#define ICL_PORT_COMP_DW0 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW0_A, \ - _ICL_PORT_COMP_DW0_B) -#define _ICL_PORT_COMP_DW1_A 0x162104 -#define _ICL_PORT_COMP_DW1_B 0x6C104 -#define ICL_PORT_COMP_DW1 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW1_A, \ - _ICL_PORT_COMP_DW1_B) -#define _ICL_PORT_COMP_DW3_A 0x16210C -#define _ICL_PORT_COMP_DW3_B 0x6C10C -#define ICL_PORT_COMP_DW3 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW3_A, \ - _ICL_PORT_COMP_DW3_B) -#define _ICL_PORT_COMP_DW9_A 0x162124 -#define _ICL_PORT_COMP_DW9_B 0x6C124 -#define ICL_PORT_COMP_DW9 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW9_A, \ - _ICL_PORT_COMP_DW9_B) -#define _ICL_PORT_COMP_DW10_A 0x162128 -#define _ICL_PORT_COMP_DW10_B 0x6C128 -#define ICL_PORT_COMP_DW10 (port) _MMIO_PORT(port, \ - _ICL_PORT_COMP_DW10_A, \ - _ICL_PORT_COMP_DW10_B) -/* ICL PHY DFLEX registers */ #define PORT_TX_DFLEXDPMLE1 _MMIO(0x1638C0)#define DFLEXDPMLE1_DPMLETC_MASK (n) (0xf << (4 * (n)))
Signature · 6 lines
2.19.1.1.g8c3cf03f71 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 7/8 drm/i915/icl: Introduce new macros to get combophy registers
In reply to Mahesh KumarFrom: Lucas De Marchi <[email protected]>
combo-phy register instances are at same offset from base for each combo-phy port, i.e.
Port A base offset: 0x16200
Port B base offset: 0x6C000
All the other addresses for both ports can be derived by calculating offset to these base addresses.
PORT_CL_DW_OFFSET 0x0
PORT_CL_DW<x> 0 + x * 4
PORT_COMP_OFFSET 0x100
PORT_COMP_DW<x> 0x100 + x * 4
PORT_PCS_AUX_OFFSET 0x300 PORT_PCS_GRP_OFFSET 0x600 PORT_PCS_LN<y>_OFFSET 0x800 + y * 0x100
PORT_TX_AUX_OFFSET 0x380 PORT_TX_GRP_OFFSET 0x680 PORT_TX_LN<y>_OFFSET 0x880 + y * 0x100
And inside each PORT_TX_[AUX|GRP|LN] we add dw * 4.
Based on original patch by Mahesh Kumar <[email protected]>.
--- drivers/gpu/drm/i915/i915_reg.h | 154 ++++++++++++++-------------------------- 1 file changed, 54 insertions(+), 100 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +54 -100
@@ -1658,21 +1658,21 @@ enum i915_power_well_id {/* * CNL/ICL Port/COMBO-PHY Registers */ +#define _ICL_COMBOPHY_A 0x162000 +#define _ICL_COMBOPHY_B 0x6C000 +#define _ICL_COMBOPHY (port) _PICK(port, _ICL_COMBOPHY_A, \ + _ICL_COMBOPHY_B) +/* CNL/ICL Port CL_DW registers */ -#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014) +#define _ICL_PORT_CL_DW (port, dw) (_ICL_COMBOPHY(port) + \ + 4 * (dw)) -#define _ICL_PORT_CL_DW5_A 0x162014 -#define _ICL_PORT_CL_DW5_B 0x6C014 -#define ICL_PORT_CL_DW5 (port) _MMIO_PORT(port, _ICL_PORT_CL_DW5_A, \ - _ICL_PORT_CL_DW5_B) +#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014) +#define ICL_PORT_CL_DW5 (port) _MMIO(_ICL_PORT_CL_DW(port, 5))#define CL_POWER_DOWN_ENABLE (1 << 4)#define SUS_CLOCK_CONFIG (3 << 0) -#define _CNL_PORT_CL_DW10_A 0x162028 -#define _ICL_PORT_CL_DW10_B 0x6c028 -#define ICL_PORT_CL_DW10 (port) _MMIO_PORT(port, \ - _CNL_PORT_CL_DW10_A, \ - _ICL_PORT_CL_DW10_B) +#define ICL_PORT_CL_DW10 (port) _MMIO(_ICL_PORT_CL_DW(port, 10))#define PG_SEQ_DELAY_OVERRIDE_MASK (3 << 25)#define PG_SEQ_DELAY_OVERRIDE_SHIFT 25#define PG_SEQ_DELAY_OVERRIDE_ENABLE (1 << 24)
@@ -1688,31 +1688,23 @@ enum i915_power_well_id {#define PWR_DOWN_LN_MASK (0xf << 4)#define PWR_DOWN_LN_SHIFT 4 -#define _ICL_PORT_CL_DW12_A 0x162030 -#define _ICL_PORT_CL_DW12_B 0x6C030 +#define ICL_PORT_CL_DW12 (port) _MMIO(_ICL_PORT_CL_DW(port, 12))#define ICL_LANE_ENABLE_AUX (1 << 0) -#define ICL_PORT_CL_DW12 (port) _MMIO_PORT((port), \ - _ICL_PORT_CL_DW12_A, \ - _ICL_PORT_CL_DW12_B)/* CNL/ICL Port COMP_DW registers */ +#define _ICL_PORT_COMP 0x100 +#define _ICL_PORT_COMP_DW (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_COMP + 4 * (dw)) +#define CNL_PORT_COMP_DW0 _MMIO(0x162100) -#define _ICL_PORT_COMP_DW0_A 0x162100 -#define _ICL_PORT_COMP_DW0_B 0x6C100 -#define ICL_PORT_COMP_DW0 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW0_A, \ - _ICL_PORT_COMP_DW0_B) +#define ICL_PORT_COMP_DW0 (port) _MMIO(_ICL_PORT_COMP_DW(port, 0))#define COMP_INIT (1 << 31)#define CNL_PORT_COMP_DW1 _MMIO(0x162104) -#define _ICL_PORT_COMP_DW1_A 0x162104 -#define _ICL_PORT_COMP_DW1_B 0x6C104 -#define ICL_PORT_COMP_DW1 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW1_A, \ - _ICL_PORT_COMP_DW1_B) +#define ICL_PORT_COMP_DW1 (port) _MMIO(_ICL_PORT_COMP_DW(port, 1)) +#define CNL_PORT_COMP_DW3 _MMIO(0x16210c) -#define _ICL_PORT_COMP_DW3_A 0x16210C -#define _ICL_PORT_COMP_DW3_B 0x6C10C -#define ICL_PORT_COMP_DW3 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW3_A, \ - _ICL_PORT_COMP_DW3_B) +#define ICL_PORT_COMP_DW3 (port) _MMIO(_ICL_PORT_COMP_DW(port, 3))#define PROCESS_INFO_DOT_0 (0 << 26)#define PROCESS_INFO_DOT_1 (1 << 26)#define PROCESS_INFO_DOT_4 (2 << 26)
@@ -1725,17 +1717,10 @@ enum i915_power_well_id {#define VOLTAGE_INFO_SHIFT 24#define CNL_PORT_COMP_DW9 _MMIO(0x162124) -#define _ICL_PORT_COMP_DW9_A 0x162124 -#define _ICL_PORT_COMP_DW9_B 0x6C124 -#define ICL_PORT_COMP_DW9 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW9_A, \ - _ICL_PORT_COMP_DW9_B) +#define ICL_PORT_COMP_DW9 (port) _MMIO(_ICL_PORT_COMP_DW((port), 9))#define CNL_PORT_COMP_DW10 _MMIO(0x162128) -#define _ICL_PORT_COMP_DW10_A 0x162128 -#define _ICL_PORT_COMP_DW10_B 0x6C128 -#define ICL_PORT_COMP_DW10 (port) _MMIO_PORT(port, \ - _ICL_PORT_COMP_DW10_A, \ - _ICL_PORT_COMP_DW10_B) +#define ICL_PORT_COMP_DW10 (port) _MMIO(_ICL_PORT_COMP_DW((port), 10))/* CNL/ICL Port PCS registers */ #define _CNL_PORT_PCS_DW1_GRP_AE 0x162304
@@ -1755,7 +1740,6 @@ enum i915_power_well_id { _CNL_PORT_PCS_DW1_GRP_D, \ _CNL_PORT_PCS_DW1_GRP_AE, \ _CNL_PORT_PCS_DW1_GRP_F)) -#define CNL_PORT_PCS_DW1_LN0 (port) _MMIO(_PICK(port, \ _CNL_PORT_PCS_DW1_LN0_AE, \ _CNL_PORT_PCS_DW1_LN0_B, \
@@ -1764,21 +1748,18 @@ enum i915_power_well_id { _CNL_PORT_PCS_DW1_LN0_AE, \ _CNL_PORT_PCS_DW1_LN0_F)) -#define _ICL_PORT_PCS_DW1_GRP_A 0x162604 -#define _ICL_PORT_PCS_DW1_GRP_B 0x6C604 -#define _ICL_PORT_PCS_DW1_LN0_A 0x162804 -#define _ICL_PORT_PCS_DW1_LN0_B 0x6C804 -#define _ICL_PORT_PCS_DW1_AUX_A 0x162304 -#define _ICL_PORT_PCS_DW1_AUX_B 0x6c304 -#define ICL_PORT_PCS_DW1_GRP (port) _MMIO_PORT(port,\ - _ICL_PORT_PCS_DW1_GRP_A, \ - _ICL_PORT_PCS_DW1_GRP_B) -#define ICL_PORT_PCS_DW1_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_PCS_DW1_LN0_A, \ - _ICL_PORT_PCS_DW1_LN0_B) -#define ICL_PORT_PCS_DW1_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_PCS_DW1_AUX_A, \ - _ICL_PORT_PCS_DW1_AUX_B) +#define _ICL_PORT_PCS_AUX 0x300 +#define _ICL_PORT_PCS_GRP 0x600 +#define _ICL_PORT_PCS_LN (ln) (0x800 + (ln) * 0x100) +#define _ICL_PORT_PCS_DW_AUX (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_AUX + 4 * (dw)) +#define _ICL_PORT_PCS_DW_GRP (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_GRP + 4 * (dw)) +#define _ICL_PORT_PCS_DW_LN (port, dw, ln) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_LN(ln) + 4 * (dw)) +#define ICL_PORT_PCS_DW1_AUX (port) _MMIO(_ICL_PORT_PCS_DW_AUX(port, 1)) +#define ICL_PORT_PCS_DW1_GRP (port) _MMIO(_ICL_PORT_PCS_DW_GRP(port, 1)) +#define ICL_PORT_PCS_DW1_LN0 (port) _MMIO(_ICL_PORT_PCS_DW_LN(port, 1, 0))#define COMMON_KEEPER_EN (1 << 26)/* CNL/ICL Port TX registers */
@@ -1809,23 +1790,22 @@ enum i915_power_well_id { _CNL_PORT_TX_F_LN0_OFFSET) + \ 4 * (dw)) +#define _ICL_PORT_TX_AUX 0x380 +#define _ICL_PORT_TX_GRP 0x680 +#define _ICL_PORT_TX_LN (ln) (0x880 + (ln) * 0x100) + +#define _ICL_PORT_TX_DW_AUX (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_AUX + 4 * (dw)) +#define _ICL_PORT_TX_DW_GRP (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_GRP + 4 * (dw)) +#define _ICL_PORT_TX_DW_LN (port, dw, ln) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_LN(ln) + 4 * (dw)) +#define CNL_PORT_TX_DW2_GRP (port) _MMIO(_CNL_PORT_TX_DW_GRP((port), 2))#define CNL_PORT_TX_DW2_LN0 (port) _MMIO(_CNL_PORT_TX_DW_LN0((port), 2)) -#define _ICL_PORT_TX_DW2_GRP_A 0x162688 -#define _ICL_PORT_TX_DW2_GRP_B 0x6C688 -#define _ICL_PORT_TX_DW2_LN0_A 0x162888 -#define _ICL_PORT_TX_DW2_LN0_B 0x6C888 -#define _ICL_PORT_TX_DW2_AUX_A 0x162388 -#define _ICL_PORT_TX_DW2_AUX_B 0x6c388 -#define ICL_PORT_TX_DW2_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_GRP_A, \ - _ICL_PORT_TX_DW2_GRP_B) -#define ICL_PORT_TX_DW2_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_LN0_A, \ - _ICL_PORT_TX_DW2_LN0_B) -#define ICL_PORT_TX_DW2_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_AUX_A, \ - _ICL_PORT_TX_DW2_AUX_B) +#define ICL_PORT_TX_DW2_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX((port), 2)) +#define ICL_PORT_TX_DW2_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP((port), 2)) +#define ICL_PORT_TX_DW2_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN((port), 2, 0))#define SWING_SEL_UPPER (x) (((x) >> 3) << 15)#define SWING_SEL_UPPER_MASK (1 << 15)#define SWING_SEL_LOWER (x) (((x) & 0x7) << 11)
@@ -1842,24 +1822,10 @@ enum i915_power_well_id {#define CNL_PORT_TX_DW4_LN (port, ln) _MMIO(_CNL_PORT_TX_DW_LN0((port), 4) + \ ((ln) * (_CNL_PORT_TX_DW4_LN1_AE - \ _CNL_PORT_TX_DW4_LN0_AE))) -#define _ICL_PORT_TX_DW4_GRP_A 0x162690 -#define _ICL_PORT_TX_DW4_GRP_B 0x6C690 -#define _ICL_PORT_TX_DW4_LN0_A 0x162890 -#define _ICL_PORT_TX_DW4_LN1_A 0x162990 -#define _ICL_PORT_TX_DW4_LN0_B 0x6C890 -#define _ICL_PORT_TX_DW4_AUX_A 0x162390 -#define _ICL_PORT_TX_DW4_AUX_B 0x6c390 -#define ICL_PORT_TX_DW4_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW4_GRP_A, \ - _ICL_PORT_TX_DW4_GRP_B) -#define ICL_PORT_TX_DW4_LN (port, ln) _MMIO(_PORT(port, \ - _ICL_PORT_TX_DW4_LN0_A, \ - _ICL_PORT_TX_DW4_LN0_B) + \ - ((ln) * (_ICL_PORT_TX_DW4_LN1_A - \ - _ICL_PORT_TX_DW4_LN0_A))) -#define ICL_PORT_TX_DW4_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW4_AUX_A, \ - _ICL_PORT_TX_DW4_AUX_B) +#define ICL_PORT_TX_DW4_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX((port), 4)) +#define ICL_PORT_TX_DW4_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP((port), 4)) +#define ICL_PORT_TX_DW4_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN((port), 4, 0)) +#define ICL_PORT_TX_DW4_LN (port, ln) _MMIO(_ICL_PORT_TX_DW_LN((port), 4, ln))#define LOADGEN_SELECT (1 << 31)#define POST_CURSOR_1 (x) ((x) << 12)#define POST_CURSOR_1_MASK (0x3F << 12)
@@ -1870,21 +1836,9 @@ enum i915_power_well_id {#define CNL_PORT_TX_DW5_GRP (port) _MMIO(_CNL_PORT_TX_DW_GRP((port), 5))#define CNL_PORT_TX_DW5_LN0 (port) _MMIO(_CNL_PORT_TX_DW_LN0((port), 5)) -#define _ICL_PORT_TX_DW5_GRP_A 0x162694 -#define _ICL_PORT_TX_DW5_GRP_B 0x6C694 -#define _ICL_PORT_TX_DW5_LN0_A 0x162894 -#define _ICL_PORT_TX_DW5_LN0_B 0x6C894 -#define _ICL_PORT_TX_DW5_AUX_A 0x162394 -#define _ICL_PORT_TX_DW5_AUX_B 0x6c394 -#define ICL_PORT_TX_DW5_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_GRP_A, \ - _ICL_PORT_TX_DW5_GRP_B) -#define ICL_PORT_TX_DW5_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_LN0_A, \ - _ICL_PORT_TX_DW5_LN0_B) -#define ICL_PORT_TX_DW5_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_AUX_A, \ - _ICL_PORT_TX_DW5_AUX_B) +#define ICL_PORT_TX_DW5_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX((port), 5)) +#define ICL_PORT_TX_DW5_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP((port), 5)) +#define ICL_PORT_TX_DW5_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN((port), 5, 0))#define TX_TRAINING_EN (1 << 31)#define TAP2_DISABLE (1 << 30)#define TAP3_DISABLE (1 << 29)
Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerRe: [PATCH 7/8] drm/i915/icl: Introduce new macros to get combophy registers
Quoted 17 lines · Mahesh Kumar
From: Lucas De Marchi <[email protected]>
combo-phy register instances are at same offset from base for each combo-phy port, i.e.
Port A base offset:
0x16200
Port B base offset:0x6C000All the other addresses for both ports can be derived by calculating offset to these base addresses.
PORT_CL_DW_OFFSET0x0
PORT_CL_DW<x> 0 + x * 4
PORT_COMP_OFFSET0x100
PORT_COMP_DW<x>0x100+ x * 4
Quoted 7 lines
PORT_PCS_AUX_OFFSET 0x300 PORT_PCS_GRP_OFFSET 0x600 PORT_PCS_LN<y>_OFFSET 0x800 + y * 0x100PORT_TX_AUX_OFFSET 0x380 PORT_TX_GRP_OFFSET 0x680 PORT_TX_LN<y>_OFFSET 0x880 + y * 0x100
well, in the past I was in favor of trying to find
logic and simplify as much as possible the register offsets and bits.
However nowadays I'm more inclined to keep them explicit for some reasons.
1. Another developer when adding some workaround later might search the code for the reg offset, not finding and adding it again. In this case the risk is minimal because it is only a risk of duplicating the offset definition.
2. HW Architects when planing to remove some bits consult us to see the impact and I always get myself searching for the offsets. In this case the risk is higher because if we can't find the hidden offset we might underestimate the impact on a future hw generation.
3. I'm checking to see if there are better ways to get spec changes to notify us that we have to change something. It would be harder to parse, but I know it is possible.
Well, maybe a tool for 3 could already answer the item above in a automated and more reliable way... But while we don't have such tool maybe it is better to keep explicit.
But I'm not blocking or anything like that. I'm just brainstorming some points here from my view on this.
another detail below:
Quoted 19 lines
And inside each PORT_TX_[AUX|GRP|LN] we add
dw * 4.Based on original patch by Mahesh Kumar <[email protected]>.
Signed-off-by Lucas De Marchi <[email protected]>Signed-off-by Mahesh Kumar <[email protected]>Cc Rodrigo Vivi <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 154 ++++++++++++++-------------------------- 1 file changed, 54 insertions(+), 100 deletions(-)drivers/gpu/drm/i915/i915_reg.h +0
-0@@ -1658,21 +1658,21 @@ enum i915_power_well_id {/* * CNL/ICL Port/COMBO-PHY Registers
drivers/gpu/drm/i915/i915_reg.h enum i915_power_well_id { · line 1668
Quoted 10 lines
drivers/gpu/drm/i915/i915_reg.h +7
-1*/ +#define _ICL_COMBOPHY_A 0x162000 +#define _ICL_COMBOPHY_B 0x6C000 +#define _ICL_COMBOPHY (port) _PICK(port, _ICL_COMBOPHY_A, \ + _ICL_COMBOPHY_B) +/* CNL/ICL Port CL_DW registers */ -#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014) +#define _ICL_PORT_CL_DW (port, dw) (_ICL_COMBOPHY(port) + \ + 4 * (dw))
probably better if inverted DW(dw, port)
because reg definition is DW#dw_#port and I got
confused when reviewing items below...
Quoted 221 lines
drivers/gpu/drm/i915/i915_reg.h +47
-99-#define _ICL_PORT_CL_DW5_A 0x162014 -#define _ICL_PORT_CL_DW5_B 0x6C014 -#define ICL_PORT_CL_DW5 (port) _MMIO_PORT(port, _ICL_PORT_CL_DW5_A, \ - _ICL_PORT_CL_DW5_B) +#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014) +#define ICL_PORT_CL_DW5 (port) _MMIO(_ICL_PORT_CL_DW(port, 5))#define CL_POWER_DOWN_ENABLE (1 << 4)#define SUS_CLOCK_CONFIG (3 << 0) -#define _CNL_PORT_CL_DW10_A 0x162028 -#define _ICL_PORT_CL_DW10_B 0x6c028 -#define ICL_PORT_CL_DW10 (port) _MMIO_PORT(port, \ - _CNL_PORT_CL_DW10_A, \ - _ICL_PORT_CL_DW10_B) +#define ICL_PORT_CL_DW10 (port) _MMIO(_ICL_PORT_CL_DW(port, 10))#define PG_SEQ_DELAY_OVERRIDE_MASK (3 << 25)#define PG_SEQ_DELAY_OVERRIDE_SHIFT 25#define PG_SEQ_DELAY_OVERRIDE_ENABLE (1 << 24)@@ -1688,31 +1688,23 @@ enum i915_power_well_id {#define PWR_DOWN_LN_MASK (0xf << 4)#define PWR_DOWN_LN_SHIFT 4 -#define _ICL_PORT_CL_DW12_A 0x162030 -#define _ICL_PORT_CL_DW12_B 0x6C030 +#define ICL_PORT_CL_DW12 (port) _MMIO(_ICL_PORT_CL_DW(port, 12))#define ICL_LANE_ENABLE_AUX (1 << 0) -#define ICL_PORT_CL_DW12 (port) _MMIO_PORT((port), \ - _ICL_PORT_CL_DW12_A, \ - _ICL_PORT_CL_DW12_B)/* CNL/ICL Port COMP_DW registers */ +#define _ICL_PORT_COMP 0x100 +#define _ICL_PORT_COMP_DW (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_COMP + 4 * (dw)) +#define CNL_PORT_COMP_DW0 _MMIO(0x162100) -#define _ICL_PORT_COMP_DW0_A 0x162100 -#define _ICL_PORT_COMP_DW0_B 0x6C100 -#define ICL_PORT_COMP_DW0 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW0_A, \ - _ICL_PORT_COMP_DW0_B) +#define ICL_PORT_COMP_DW0 (port) _MMIO(_ICL_PORT_COMP_DW(port, 0))#define COMP_INIT (1 << 31)#define CNL_PORT_COMP_DW1 _MMIO(0x162104) -#define _ICL_PORT_COMP_DW1_A 0x162104 -#define _ICL_PORT_COMP_DW1_B 0x6C104 -#define ICL_PORT_COMP_DW1 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW1_A, \ - _ICL_PORT_COMP_DW1_B) +#define ICL_PORT_COMP_DW1 (port) _MMIO(_ICL_PORT_COMP_DW(port, 1)) +#define CNL_PORT_COMP_DW3 _MMIO(0x16210c) -#define _ICL_PORT_COMP_DW3_A 0x16210C -#define _ICL_PORT_COMP_DW3_B 0x6C10C -#define ICL_PORT_COMP_DW3 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW3_A, \ - _ICL_PORT_COMP_DW3_B) +#define ICL_PORT_COMP_DW3 (port) _MMIO(_ICL_PORT_COMP_DW(port, 3))#define PROCESS_INFO_DOT_0 (0 << 26)#define PROCESS_INFO_DOT_1 (1 << 26)#define PROCESS_INFO_DOT_4 (2 << 26)@@ -1725,17 +1717,10 @@ enum i915_power_well_id {#define VOLTAGE_INFO_SHIFT 24#define CNL_PORT_COMP_DW9 _MMIO(0x162124) -#define _ICL_PORT_COMP_DW9_A 0x162124 -#define _ICL_PORT_COMP_DW9_B 0x6C124 -#define ICL_PORT_COMP_DW9 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW9_A, \ - _ICL_PORT_COMP_DW9_B) +#define ICL_PORT_COMP_DW9 (port) _MMIO(_ICL_PORT_COMP_DW((port), 9))#define CNL_PORT_COMP_DW10 _MMIO(0x162128) -#define _ICL_PORT_COMP_DW10_A 0x162128 -#define _ICL_PORT_COMP_DW10_B 0x6C128 -#define ICL_PORT_COMP_DW10 (port) _MMIO_PORT(port, \ - _ICL_PORT_COMP_DW10_A, \ - _ICL_PORT_COMP_DW10_B) +#define ICL_PORT_COMP_DW10 (port) _MMIO(_ICL_PORT_COMP_DW((port), 10))/* CNL/ICL Port PCS registers */ #define _CNL_PORT_PCS_DW1_GRP_AE 0x162304@@ -1755,7 +1740,6 @@ enum i915_power_well_id { _CNL_PORT_PCS_DW1_GRP_D, \ _CNL_PORT_PCS_DW1_GRP_AE, \ _CNL_PORT_PCS_DW1_GRP_F)) -#define CNL_PORT_PCS_DW1_LN0 (port) _MMIO(_PICK(port, \ _CNL_PORT_PCS_DW1_LN0_AE, \ _CNL_PORT_PCS_DW1_LN0_B, \@@ -1764,21 +1748,18 @@ enum i915_power_well_id { _CNL_PORT_PCS_DW1_LN0_AE, \ _CNL_PORT_PCS_DW1_LN0_F)) -#define _ICL_PORT_PCS_DW1_GRP_A 0x162604 -#define _ICL_PORT_PCS_DW1_GRP_B 0x6C604 -#define _ICL_PORT_PCS_DW1_LN0_A 0x162804 -#define _ICL_PORT_PCS_DW1_LN0_B 0x6C804 -#define _ICL_PORT_PCS_DW1_AUX_A 0x162304 -#define _ICL_PORT_PCS_DW1_AUX_B 0x6c304 -#define ICL_PORT_PCS_DW1_GRP (port) _MMIO_PORT(port,\ - _ICL_PORT_PCS_DW1_GRP_A, \ - _ICL_PORT_PCS_DW1_GRP_B) -#define ICL_PORT_PCS_DW1_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_PCS_DW1_LN0_A, \ - _ICL_PORT_PCS_DW1_LN0_B) -#define ICL_PORT_PCS_DW1_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_PCS_DW1_AUX_A, \ - _ICL_PORT_PCS_DW1_AUX_B) +#define _ICL_PORT_PCS_AUX 0x300 +#define _ICL_PORT_PCS_GRP 0x600 +#define _ICL_PORT_PCS_LN (ln) (0x800 + (ln) * 0x100) +#define _ICL_PORT_PCS_DW_AUX (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_AUX + 4 * (dw)) +#define _ICL_PORT_PCS_DW_GRP (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_GRP + 4 * (dw)) +#define _ICL_PORT_PCS_DW_LN (port, dw, ln) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_LN(ln) + 4 * (dw)) +#define ICL_PORT_PCS_DW1_AUX (port) _MMIO(_ICL_PORT_PCS_DW_AUX(port, 1)) +#define ICL_PORT_PCS_DW1_GRP (port) _MMIO(_ICL_PORT_PCS_DW_GRP(port, 1)) +#define ICL_PORT_PCS_DW1_LN0 (port) _MMIO(_ICL_PORT_PCS_DW_LN(port, 1, 0))#define COMMON_KEEPER_EN (1 << 26)/* CNL/ICL Port TX registers */ @@ -1809,23 +1790,22 @@ enum i915_power_well_id { _CNL_PORT_TX_F_LN0_OFFSET) + \ 4 * (dw)) +#define _ICL_PORT_TX_AUX 0x380 +#define _ICL_PORT_TX_GRP 0x680 +#define _ICL_PORT_TX_LN (ln) (0x880 + (ln) * 0x100) + +#define _ICL_PORT_TX_DW_AUX (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_AUX + 4 * (dw)) +#define _ICL_PORT_TX_DW_GRP (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_GRP + 4 * (dw)) +#define _ICL_PORT_TX_DW_LN (port, dw, ln) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_LN(ln) + 4 * (dw)) +#define CNL_PORT_TX_DW2_GRP (port) _MMIO(_CNL_PORT_TX_DW_GRP((port), 2))#define CNL_PORT_TX_DW2_LN0 (port) _MMIO(_CNL_PORT_TX_DW_LN0((port), 2)) -#define _ICL_PORT_TX_DW2_GRP_A 0x162688 -#define _ICL_PORT_TX_DW2_GRP_B 0x6C688 -#define _ICL_PORT_TX_DW2_LN0_A 0x162888 -#define _ICL_PORT_TX_DW2_LN0_B 0x6C888 -#define _ICL_PORT_TX_DW2_AUX_A 0x162388 -#define _ICL_PORT_TX_DW2_AUX_B 0x6c388 -#define ICL_PORT_TX_DW2_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_GRP_A, \ - _ICL_PORT_TX_DW2_GRP_B) -#define ICL_PORT_TX_DW2_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_LN0_A, \ - _ICL_PORT_TX_DW2_LN0_B) -#define ICL_PORT_TX_DW2_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_AUX_A, \ - _ICL_PORT_TX_DW2_AUX_B) +#define ICL_PORT_TX_DW2_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX((port), 2)) +#define ICL_PORT_TX_DW2_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP((port), 2)) +#define ICL_PORT_TX_DW2_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN((port), 2, 0))#define SWING_SEL_UPPER (x) (((x) >> 3) << 15)#define SWING_SEL_UPPER_MASK (1 << 15)#define SWING_SEL_LOWER (x) (((x) & 0x7) << 11)@@ -1842,24 +1822,10 @@ enum i915_power_well_id {#define CNL_PORT_TX_DW4_LN (port, ln) _MMIO(_CNL_PORT_TX_DW_LN0((port), 4) + \ ((ln) * (_CNL_PORT_TX_DW4_LN1_AE - \ _CNL_PORT_TX_DW4_LN0_AE))) -#define _ICL_PORT_TX_DW4_GRP_A 0x162690 -#define _ICL_PORT_TX_DW4_GRP_B 0x6C690 -#define _ICL_PORT_TX_DW4_LN0_A 0x162890 -#define _ICL_PORT_TX_DW4_LN1_A 0x162990 -#define _ICL_PORT_TX_DW4_LN0_B 0x6C890 -#define _ICL_PORT_TX_DW4_AUX_A 0x162390 -#define _ICL_PORT_TX_DW4_AUX_B 0x6c390 -#define ICL_PORT_TX_DW4_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW4_GRP_A, \ - _ICL_PORT_TX_DW4_GRP_B) -#define ICL_PORT_TX_DW4_LN (port, ln) _MMIO(_PORT(port, \ - _ICL_PORT_TX_DW4_LN0_A, \ - _ICL_PORT_TX_DW4_LN0_B) + \ - ((ln) * (_ICL_PORT_TX_DW4_LN1_A - \ - _ICL_PORT_TX_DW4_LN0_A))) -#define ICL_PORT_TX_DW4_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW4_AUX_A, \ - _ICL_PORT_TX_DW4_AUX_B) +#define ICL_PORT_TX_DW4_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX((port), 4)) +#define ICL_PORT_TX_DW4_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP((port), 4)) +#define ICL_PORT_TX_DW4_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN((port), 4, 0)) +#define ICL_PORT_TX_DW4_LN (port, ln) _MMIO(_ICL_PORT_TX_DW_LN((port), 4, ln))#define LOADGEN_SELECT (1 << 31)#define POST_CURSOR_1 (x) ((x) << 12)#define POST_CURSOR_1_MASK (0x3F << 12)@@ -1870,21 +1836,9 @@ enum i915_power_well_id {#define CNL_PORT_TX_DW5_GRP (port) _MMIO(_CNL_PORT_TX_DW_GRP((port), 5))#define CNL_PORT_TX_DW5_LN0 (port) _MMIO(_CNL_PORT_TX_DW_LN0((port), 5)) -#define _ICL_PORT_TX_DW5_GRP_A 0x162694 -#define _ICL_PORT_TX_DW5_GRP_B 0x6C694 -#define _ICL_PORT_TX_DW5_LN0_A 0x162894 -#define _ICL_PORT_TX_DW5_LN0_B 0x6C894 -#define _ICL_PORT_TX_DW5_AUX_A 0x162394 -#define _ICL_PORT_TX_DW5_AUX_B 0x6c394 -#define ICL_PORT_TX_DW5_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_GRP_A, \ - _ICL_PORT_TX_DW5_GRP_B) -#define ICL_PORT_TX_DW5_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_LN0_A, \ - _ICL_PORT_TX_DW5_LN0_B) -#define ICL_PORT_TX_DW5_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_AUX_A, \ - _ICL_PORT_TX_DW5_AUX_B) +#define ICL_PORT_TX_DW5_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX((port), 5)) +#define ICL_PORT_TX_DW5_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP((port), 5)) +#define ICL_PORT_TX_DW5_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN((port), 5, 0))#define TX_TRAINING_EN (1 << 31)#define TAP2_DISABLE (1 << 30)#define TAP3_DISABLE (1 << 29)Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 7/8] drm/i915/icl: Introduce new macros to get combophy registers
Quoted 46 lines · Rodrigo Vivi
Quoted 17 lines · Mahesh Kumar
From: Lucas De Marchi <[email protected]>
combo-phy register instances are at same offset from base for each combo-phy port, i.e.
Port A base offset:
0x16200
Port B base offset:0x6C000All the other addresses for both ports can be derived by calculating offset to these base addresses.
PORT_CL_DW_OFFSET0x0
PORT_CL_DW<x> 0 + x * 4
PORT_COMP_OFFSET0x100
PORT_COMP_DW<x>0x100+ x * 4Quoted 7 lines
PORT_PCS_AUX_OFFSET 0x300 PORT_PCS_GRP_OFFSET 0x600 PORT_PCS_LN<y>_OFFSET 0x800 + y * 0x100PORT_TX_AUX_OFFSET 0x380 PORT_TX_GRP_OFFSET 0x680 PORT_TX_LN<y>_OFFSET 0x880 + y * 0x100well, in the past I was in favor of trying to find
logic and simplify as much as possible the register offsets and bits.However nowadays I'm more inclined to keep them explicit for some reasons.
1. Another developer when adding some workaround later might search the code for the reg offset, not finding and adding it again. In this case the risk is minimal because it is only a risk of duplicating the offset definition.
2. HW Architects when planing to remove some bits consult us to see the impact and I always get myself searching for the offsets. In this case the risk is higher because if we can't find the hidden offset we might underestimate the impact on a future hw generation.
3. I'm checking to see if there are better ways to get spec changes to notify us that we have to change something. It would be harder to parse, but I know it is possible.
Quoted 6 lines
Well, maybe a tool for 3 could already answer the item above in a automated and more reliable way... But while we don't have such tool maybe it is better to keep explicit.
But I'm not blocking or anything like that. I'm just brainstorming some points here from my view on this.
I agree with the reasonings, but in this particular case I think it's simpler since the spec itself is now modular wrt combophy instance. See 29482, although it continues to define the individual values, this is not always the case.
Quoted 28 lines
another detail below:
Quoted 25 lines
And inside each PORT_TX_[AUX|GRP|LN] we add
dw * 4.Based on original patch by Mahesh Kumar <[email protected]>.
Signed-off-by Lucas De Marchi <[email protected]>Signed-off-by Mahesh Kumar <[email protected]>Cc Rodrigo Vivi <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 154 ++++++++++++++-------------------------- 1 file changed, 54 insertions(+), 100 deletions(-)drivers/gpu/drm/i915/i915_reg.h +5
-0@@ -1658,21 +1658,21 @@ enum i915_power_well_id {/* * CNL/ICL Port/COMBO-PHY Registers */ +#define _ICL_COMBOPHY_A 0x162000 +#define _ICL_COMBOPHY_B 0x6C000 +#define _ICL_COMBOPHY (port) _PICK(port, _ICL_COMBOPHY_A, \ + _ICL_COMBOPHY_B) +
Quoted 8 lines
drivers/gpu/drm/i915/i915_reg.h enum i915_power_well_id { · line 1668
Quoted 4 lines
drivers/gpu/drm/i915/i915_reg.h +2
-1/* CNL/ICL Port CL_DW registers */ -#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014) +#define _ICL_PORT_CL_DW (port, dw) (_ICL_COMBOPHY(port) + \ + 4 * (dw))probably better if inverted
DW(dw, port)
because reg definition is DW#dw_#port and I got
confused when reviewing items below...
ok
thanks
Lucas De Marchi
Quoted 218 lines
Quoted 218 lines
drivers/gpu/drm/i915/i915_reg.h +47
-99-#define _ICL_PORT_CL_DW5_A 0x162014 -#define _ICL_PORT_CL_DW5_B 0x6C014 -#define ICL_PORT_CL_DW5 (port) _MMIO_PORT(port, _ICL_PORT_CL_DW5_A, \ - _ICL_PORT_CL_DW5_B) +#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014) +#define ICL_PORT_CL_DW5 (port) _MMIO(_ICL_PORT_CL_DW(port, 5))#define CL_POWER_DOWN_ENABLE (1 << 4)#define SUS_CLOCK_CONFIG (3 << 0) -#define _CNL_PORT_CL_DW10_A 0x162028 -#define _ICL_PORT_CL_DW10_B 0x6c028 -#define ICL_PORT_CL_DW10 (port) _MMIO_PORT(port, \ - _CNL_PORT_CL_DW10_A, \ - _ICL_PORT_CL_DW10_B) +#define ICL_PORT_CL_DW10 (port) _MMIO(_ICL_PORT_CL_DW(port, 10))#define PG_SEQ_DELAY_OVERRIDE_MASK (3 << 25)#define PG_SEQ_DELAY_OVERRIDE_SHIFT 25#define PG_SEQ_DELAY_OVERRIDE_ENABLE (1 << 24)@@ -1688,31 +1688,23 @@ enum i915_power_well_id {#define PWR_DOWN_LN_MASK (0xf << 4)#define PWR_DOWN_LN_SHIFT 4 -#define _ICL_PORT_CL_DW12_A 0x162030 -#define _ICL_PORT_CL_DW12_B 0x6C030 +#define ICL_PORT_CL_DW12 (port) _MMIO(_ICL_PORT_CL_DW(port, 12))#define ICL_LANE_ENABLE_AUX (1 << 0) -#define ICL_PORT_CL_DW12 (port) _MMIO_PORT((port), \ - _ICL_PORT_CL_DW12_A, \ - _ICL_PORT_CL_DW12_B)/* CNL/ICL Port COMP_DW registers */ +#define _ICL_PORT_COMP 0x100 +#define _ICL_PORT_COMP_DW (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_COMP + 4 * (dw)) +#define CNL_PORT_COMP_DW0 _MMIO(0x162100) -#define _ICL_PORT_COMP_DW0_A 0x162100 -#define _ICL_PORT_COMP_DW0_B 0x6C100 -#define ICL_PORT_COMP_DW0 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW0_A, \ - _ICL_PORT_COMP_DW0_B) +#define ICL_PORT_COMP_DW0 (port) _MMIO(_ICL_PORT_COMP_DW(port, 0))#define COMP_INIT (1 << 31)#define CNL_PORT_COMP_DW1 _MMIO(0x162104) -#define _ICL_PORT_COMP_DW1_A 0x162104 -#define _ICL_PORT_COMP_DW1_B 0x6C104 -#define ICL_PORT_COMP_DW1 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW1_A, \ - _ICL_PORT_COMP_DW1_B) +#define ICL_PORT_COMP_DW1 (port) _MMIO(_ICL_PORT_COMP_DW(port, 1)) +#define CNL_PORT_COMP_DW3 _MMIO(0x16210c) -#define _ICL_PORT_COMP_DW3_A 0x16210C -#define _ICL_PORT_COMP_DW3_B 0x6C10C -#define ICL_PORT_COMP_DW3 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW3_A, \ - _ICL_PORT_COMP_DW3_B) +#define ICL_PORT_COMP_DW3 (port) _MMIO(_ICL_PORT_COMP_DW(port, 3))#define PROCESS_INFO_DOT_0 (0 << 26)#define PROCESS_INFO_DOT_1 (1 << 26)#define PROCESS_INFO_DOT_4 (2 << 26)@@ -1725,17 +1717,10 @@ enum i915_power_well_id {#define VOLTAGE_INFO_SHIFT 24#define CNL_PORT_COMP_DW9 _MMIO(0x162124) -#define _ICL_PORT_COMP_DW9_A 0x162124 -#define _ICL_PORT_COMP_DW9_B 0x6C124 -#define ICL_PORT_COMP_DW9 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW9_A, \ - _ICL_PORT_COMP_DW9_B) +#define ICL_PORT_COMP_DW9 (port) _MMIO(_ICL_PORT_COMP_DW((port), 9))#define CNL_PORT_COMP_DW10 _MMIO(0x162128) -#define _ICL_PORT_COMP_DW10_A 0x162128 -#define _ICL_PORT_COMP_DW10_B 0x6C128 -#define ICL_PORT_COMP_DW10 (port) _MMIO_PORT(port, \ - _ICL_PORT_COMP_DW10_A, \ - _ICL_PORT_COMP_DW10_B) +#define ICL_PORT_COMP_DW10 (port) _MMIO(_ICL_PORT_COMP_DW((port), 10))/* CNL/ICL Port PCS registers */ #define _CNL_PORT_PCS_DW1_GRP_AE 0x162304@@ -1755,7 +1740,6 @@ enum i915_power_well_id { _CNL_PORT_PCS_DW1_GRP_D, \ _CNL_PORT_PCS_DW1_GRP_AE, \ _CNL_PORT_PCS_DW1_GRP_F)) -#define CNL_PORT_PCS_DW1_LN0 (port) _MMIO(_PICK(port, \ _CNL_PORT_PCS_DW1_LN0_AE, \ _CNL_PORT_PCS_DW1_LN0_B, \@@ -1764,21 +1748,18 @@ enum i915_power_well_id { _CNL_PORT_PCS_DW1_LN0_AE, \ _CNL_PORT_PCS_DW1_LN0_F)) -#define _ICL_PORT_PCS_DW1_GRP_A 0x162604 -#define _ICL_PORT_PCS_DW1_GRP_B 0x6C604 -#define _ICL_PORT_PCS_DW1_LN0_A 0x162804 -#define _ICL_PORT_PCS_DW1_LN0_B 0x6C804 -#define _ICL_PORT_PCS_DW1_AUX_A 0x162304 -#define _ICL_PORT_PCS_DW1_AUX_B 0x6c304 -#define ICL_PORT_PCS_DW1_GRP (port) _MMIO_PORT(port,\ - _ICL_PORT_PCS_DW1_GRP_A, \ - _ICL_PORT_PCS_DW1_GRP_B) -#define ICL_PORT_PCS_DW1_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_PCS_DW1_LN0_A, \ - _ICL_PORT_PCS_DW1_LN0_B) -#define ICL_PORT_PCS_DW1_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_PCS_DW1_AUX_A, \ - _ICL_PORT_PCS_DW1_AUX_B) +#define _ICL_PORT_PCS_AUX 0x300 +#define _ICL_PORT_PCS_GRP 0x600 +#define _ICL_PORT_PCS_LN (ln) (0x800 + (ln) * 0x100) +#define _ICL_PORT_PCS_DW_AUX (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_AUX + 4 * (dw)) +#define _ICL_PORT_PCS_DW_GRP (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_GRP + 4 * (dw)) +#define _ICL_PORT_PCS_DW_LN (port, dw, ln) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_LN(ln) + 4 * (dw)) +#define ICL_PORT_PCS_DW1_AUX (port) _MMIO(_ICL_PORT_PCS_DW_AUX(port, 1)) +#define ICL_PORT_PCS_DW1_GRP (port) _MMIO(_ICL_PORT_PCS_DW_GRP(port, 1)) +#define ICL_PORT_PCS_DW1_LN0 (port) _MMIO(_ICL_PORT_PCS_DW_LN(port, 1, 0))#define COMMON_KEEPER_EN (1 << 26)/* CNL/ICL Port TX registers */ @@ -1809,23 +1790,22 @@ enum i915_power_well_id { _CNL_PORT_TX_F_LN0_OFFSET) + \ 4 * (dw)) +#define _ICL_PORT_TX_AUX 0x380 +#define _ICL_PORT_TX_GRP 0x680 +#define _ICL_PORT_TX_LN (ln) (0x880 + (ln) * 0x100) + +#define _ICL_PORT_TX_DW_AUX (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_AUX + 4 * (dw)) +#define _ICL_PORT_TX_DW_GRP (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_GRP + 4 * (dw)) +#define _ICL_PORT_TX_DW_LN (port, dw, ln) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_LN(ln) + 4 * (dw)) +#define CNL_PORT_TX_DW2_GRP (port) _MMIO(_CNL_PORT_TX_DW_GRP((port), 2))#define CNL_PORT_TX_DW2_LN0 (port) _MMIO(_CNL_PORT_TX_DW_LN0((port), 2)) -#define _ICL_PORT_TX_DW2_GRP_A 0x162688 -#define _ICL_PORT_TX_DW2_GRP_B 0x6C688 -#define _ICL_PORT_TX_DW2_LN0_A 0x162888 -#define _ICL_PORT_TX_DW2_LN0_B 0x6C888 -#define _ICL_PORT_TX_DW2_AUX_A 0x162388 -#define _ICL_PORT_TX_DW2_AUX_B 0x6c388 -#define ICL_PORT_TX_DW2_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_GRP_A, \ - _ICL_PORT_TX_DW2_GRP_B) -#define ICL_PORT_TX_DW2_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_LN0_A, \ - _ICL_PORT_TX_DW2_LN0_B) -#define ICL_PORT_TX_DW2_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_AUX_A, \ - _ICL_PORT_TX_DW2_AUX_B) +#define ICL_PORT_TX_DW2_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX((port), 2)) +#define ICL_PORT_TX_DW2_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP((port), 2)) +#define ICL_PORT_TX_DW2_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN((port), 2, 0))#define SWING_SEL_UPPER (x) (((x) >> 3) << 15)#define SWING_SEL_UPPER_MASK (1 << 15)#define SWING_SEL_LOWER (x) (((x) & 0x7) << 11)@@ -1842,24 +1822,10 @@ enum i915_power_well_id {#define CNL_PORT_TX_DW4_LN (port, ln) _MMIO(_CNL_PORT_TX_DW_LN0((port), 4) + \ ((ln) * (_CNL_PORT_TX_DW4_LN1_AE - \ _CNL_PORT_TX_DW4_LN0_AE))) -#define _ICL_PORT_TX_DW4_GRP_A 0x162690 -#define _ICL_PORT_TX_DW4_GRP_B 0x6C690 -#define _ICL_PORT_TX_DW4_LN0_A 0x162890 -#define _ICL_PORT_TX_DW4_LN1_A 0x162990 -#define _ICL_PORT_TX_DW4_LN0_B 0x6C890 -#define _ICL_PORT_TX_DW4_AUX_A 0x162390 -#define _ICL_PORT_TX_DW4_AUX_B 0x6c390 -#define ICL_PORT_TX_DW4_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW4_GRP_A, \ - _ICL_PORT_TX_DW4_GRP_B) -#define ICL_PORT_TX_DW4_LN (port, ln) _MMIO(_PORT(port, \ - _ICL_PORT_TX_DW4_LN0_A, \ - _ICL_PORT_TX_DW4_LN0_B) + \ - ((ln) * (_ICL_PORT_TX_DW4_LN1_A - \ - _ICL_PORT_TX_DW4_LN0_A))) -#define ICL_PORT_TX_DW4_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW4_AUX_A, \ - _ICL_PORT_TX_DW4_AUX_B) +#define ICL_PORT_TX_DW4_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX((port), 4)) +#define ICL_PORT_TX_DW4_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP((port), 4)) +#define ICL_PORT_TX_DW4_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN((port), 4, 0)) +#define ICL_PORT_TX_DW4_LN (port, ln) _MMIO(_ICL_PORT_TX_DW_LN((port), 4, ln))#define LOADGEN_SELECT (1 << 31)#define POST_CURSOR_1 (x) ((x) << 12)#define POST_CURSOR_1_MASK (0x3F << 12)@@ -1870,21 +1836,9 @@ enum i915_power_well_id {#define CNL_PORT_TX_DW5_GRP (port) _MMIO(_CNL_PORT_TX_DW_GRP((port), 5))#define CNL_PORT_TX_DW5_LN0 (port) _MMIO(_CNL_PORT_TX_DW_LN0((port), 5)) -#define _ICL_PORT_TX_DW5_GRP_A 0x162694 -#define _ICL_PORT_TX_DW5_GRP_B 0x6C694 -#define _ICL_PORT_TX_DW5_LN0_A 0x162894 -#define _ICL_PORT_TX_DW5_LN0_B 0x6C894 -#define _ICL_PORT_TX_DW5_AUX_A 0x162394 -#define _ICL_PORT_TX_DW5_AUX_B 0x6c394 -#define ICL_PORT_TX_DW5_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_GRP_A, \ - _ICL_PORT_TX_DW5_GRP_B) -#define ICL_PORT_TX_DW5_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_LN0_A, \ - _ICL_PORT_TX_DW5_LN0_B) -#define ICL_PORT_TX_DW5_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_AUX_A, \ - _ICL_PORT_TX_DW5_AUX_B) +#define ICL_PORT_TX_DW5_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX((port), 5)) +#define ICL_PORT_TX_DW5_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP((port), 5)) +#define ICL_PORT_TX_DW5_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN((port), 5, 0))#define TX_TRAINING_EN (1 << 31)#define TAP2_DISABLE (1 << 30)#define TAP3_DISABLE (1 << 29)Signature · 1 line
2.16.2
Quoted 4 lines
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 7/8] drm/i915/icl: Introduce new macros to get combophy registers
Quoted 51 lines · Lucas De Marchi
Quoted 50 lines · Rodrigo Vivi
Quoted 17 lines · Mahesh Kumar
From: Lucas De Marchi <[email protected]>
combo-phy register instances are at same offset from base for each combo-phy port, i.e.
Port A base offset:
0x16200
Port B base offset:0x6C000All the other addresses for both ports can be derived by calculating offset to these base addresses.
PORT_CL_DW_OFFSET0x0
PORT_CL_DW<x> 0 + x * 4
PORT_COMP_OFFSET0x100
PORT_COMP_DW<x>0x100+ x * 4Quoted 7 lines
PORT_PCS_AUX_OFFSET 0x300 PORT_PCS_GRP_OFFSET 0x600 PORT_PCS_LN<y>_OFFSET 0x800 + y * 0x100PORT_TX_AUX_OFFSET 0x380 PORT_TX_GRP_OFFSET 0x680 PORT_TX_LN<y>_OFFSET 0x880 + y * 0x100well, in the past I was in favor of trying to find
logic and simplify as much as possible the register offsets and bits.However nowadays I'm more inclined to keep them explicit for some reasons.
1. Another developer when adding some workaround later might search the code for the reg offset, not finding and adding it again. In this case the risk is minimal because it is only a risk of duplicating the offset definition.
2. HW Architects when planing to remove some bits consult us to see the impact and I always get myself searching for the offsets. In this case the risk is higher because if we can't find the hidden offset we might underestimate the impact on a future hw generation.
3. I'm checking to see if there are better ways to get spec changes to notify us that we have to change something. It would be harder to parse, but I know it is possible.
Well, maybe a tool for 3 could already answer the item above in a automated and more reliable way... But while we don't have such tool maybe it is better to keep explicit.
Quoted 7 lines
Quoted 2 lines
But I'm not blocking or anything like that. I'm just brainstorming some points here from my view on this.
I agree with the reasonings, but in this particular case I think it's simpler since the spec itself is now modular wrt combophy instance. See 29482, although it continues to define the individual values, this is not always the case.
hmm... makes sense...
Quoted 39 lines
Quoted 30 lines
another detail below:
Quoted 25 lines
And inside each PORT_TX_[AUX|GRP|LN] we add
dw * 4.Based on original patch by Mahesh Kumar <[email protected]>.
Signed-off-by Lucas De Marchi <[email protected]>Signed-off-by Mahesh Kumar <[email protected]>Cc Rodrigo Vivi <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 154 ++++++++++++++-------------------------- 1 file changed, 54 insertions(+), 100 deletions(-)drivers/gpu/drm/i915/i915_reg.h +5
-0@@ -1658,21 +1658,21 @@ enum i915_power_well_id {/* * CNL/ICL Port/COMBO-PHY Registers */ +#define _ICL_COMBOPHY_A 0x162000 +#define _ICL_COMBOPHY_B 0x6C000 +#define _ICL_COMBOPHY (port) _PICK(port, _ICL_COMBOPHY_A, \ + _ICL_COMBOPHY_B) +Quoted 8 lines
drivers/gpu/drm/i915/i915_reg.h enum i915_power_well_id { · line 1668
Quoted 4 lines
drivers/gpu/drm/i915/i915_reg.h +2
-1/* CNL/ICL Port CL_DW registers */ -#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014) +#define _ICL_PORT_CL_DW (port, dw) (_ICL_COMBOPHY(port) + \ + 4 * (dw))probably better if inverted
DW(dw, port)
because reg definition is DW#dw_#port and I got
confused when reviewing items below...
Quoted 1 line
ok
thanks, with this changed feel free to already add
Quoted 222 lines
thanks
Lucas De MarchiQuoted 218 lines
Quoted 218 lines
drivers/gpu/drm/i915/i915_reg.h +47
-99-#define _ICL_PORT_CL_DW5_A 0x162014 -#define _ICL_PORT_CL_DW5_B 0x6C014 -#define ICL_PORT_CL_DW5 (port) _MMIO_PORT(port, _ICL_PORT_CL_DW5_A, \ - _ICL_PORT_CL_DW5_B) +#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014) +#define ICL_PORT_CL_DW5 (port) _MMIO(_ICL_PORT_CL_DW(port, 5))#define CL_POWER_DOWN_ENABLE (1 << 4)#define SUS_CLOCK_CONFIG (3 << 0) -#define _CNL_PORT_CL_DW10_A 0x162028 -#define _ICL_PORT_CL_DW10_B 0x6c028 -#define ICL_PORT_CL_DW10 (port) _MMIO_PORT(port, \ - _CNL_PORT_CL_DW10_A, \ - _ICL_PORT_CL_DW10_B) +#define ICL_PORT_CL_DW10 (port) _MMIO(_ICL_PORT_CL_DW(port, 10))#define PG_SEQ_DELAY_OVERRIDE_MASK (3 << 25)#define PG_SEQ_DELAY_OVERRIDE_SHIFT 25#define PG_SEQ_DELAY_OVERRIDE_ENABLE (1 << 24)@@ -1688,31 +1688,23 @@ enum i915_power_well_id {#define PWR_DOWN_LN_MASK (0xf << 4)#define PWR_DOWN_LN_SHIFT 4 -#define _ICL_PORT_CL_DW12_A 0x162030 -#define _ICL_PORT_CL_DW12_B 0x6C030 +#define ICL_PORT_CL_DW12 (port) _MMIO(_ICL_PORT_CL_DW(port, 12))#define ICL_LANE_ENABLE_AUX (1 << 0) -#define ICL_PORT_CL_DW12 (port) _MMIO_PORT((port), \ - _ICL_PORT_CL_DW12_A, \ - _ICL_PORT_CL_DW12_B)/* CNL/ICL Port COMP_DW registers */ +#define _ICL_PORT_COMP 0x100 +#define _ICL_PORT_COMP_DW (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_COMP + 4 * (dw)) +#define CNL_PORT_COMP_DW0 _MMIO(0x162100) -#define _ICL_PORT_COMP_DW0_A 0x162100 -#define _ICL_PORT_COMP_DW0_B 0x6C100 -#define ICL_PORT_COMP_DW0 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW0_A, \ - _ICL_PORT_COMP_DW0_B) +#define ICL_PORT_COMP_DW0 (port) _MMIO(_ICL_PORT_COMP_DW(port, 0))#define COMP_INIT (1 << 31)#define CNL_PORT_COMP_DW1 _MMIO(0x162104) -#define _ICL_PORT_COMP_DW1_A 0x162104 -#define _ICL_PORT_COMP_DW1_B 0x6C104 -#define ICL_PORT_COMP_DW1 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW1_A, \ - _ICL_PORT_COMP_DW1_B) +#define ICL_PORT_COMP_DW1 (port) _MMIO(_ICL_PORT_COMP_DW(port, 1)) +#define CNL_PORT_COMP_DW3 _MMIO(0x16210c) -#define _ICL_PORT_COMP_DW3_A 0x16210C -#define _ICL_PORT_COMP_DW3_B 0x6C10C -#define ICL_PORT_COMP_DW3 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW3_A, \ - _ICL_PORT_COMP_DW3_B) +#define ICL_PORT_COMP_DW3 (port) _MMIO(_ICL_PORT_COMP_DW(port, 3))#define PROCESS_INFO_DOT_0 (0 << 26)#define PROCESS_INFO_DOT_1 (1 << 26)#define PROCESS_INFO_DOT_4 (2 << 26)@@ -1725,17 +1717,10 @@ enum i915_power_well_id {#define VOLTAGE_INFO_SHIFT 24#define CNL_PORT_COMP_DW9 _MMIO(0x162124) -#define _ICL_PORT_COMP_DW9_A 0x162124 -#define _ICL_PORT_COMP_DW9_B 0x6C124 -#define ICL_PORT_COMP_DW9 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW9_A, \ - _ICL_PORT_COMP_DW9_B) +#define ICL_PORT_COMP_DW9 (port) _MMIO(_ICL_PORT_COMP_DW((port), 9))#define CNL_PORT_COMP_DW10 _MMIO(0x162128) -#define _ICL_PORT_COMP_DW10_A 0x162128 -#define _ICL_PORT_COMP_DW10_B 0x6C128 -#define ICL_PORT_COMP_DW10 (port) _MMIO_PORT(port, \ - _ICL_PORT_COMP_DW10_A, \ - _ICL_PORT_COMP_DW10_B) +#define ICL_PORT_COMP_DW10 (port) _MMIO(_ICL_PORT_COMP_DW((port), 10))/* CNL/ICL Port PCS registers */ #define _CNL_PORT_PCS_DW1_GRP_AE 0x162304@@ -1755,7 +1740,6 @@ enum i915_power_well_id { _CNL_PORT_PCS_DW1_GRP_D, \ _CNL_PORT_PCS_DW1_GRP_AE, \ _CNL_PORT_PCS_DW1_GRP_F)) -#define CNL_PORT_PCS_DW1_LN0 (port) _MMIO(_PICK(port, \ _CNL_PORT_PCS_DW1_LN0_AE, \ _CNL_PORT_PCS_DW1_LN0_B, \@@ -1764,21 +1748,18 @@ enum i915_power_well_id { _CNL_PORT_PCS_DW1_LN0_AE, \ _CNL_PORT_PCS_DW1_LN0_F)) -#define _ICL_PORT_PCS_DW1_GRP_A 0x162604 -#define _ICL_PORT_PCS_DW1_GRP_B 0x6C604 -#define _ICL_PORT_PCS_DW1_LN0_A 0x162804 -#define _ICL_PORT_PCS_DW1_LN0_B 0x6C804 -#define _ICL_PORT_PCS_DW1_AUX_A 0x162304 -#define _ICL_PORT_PCS_DW1_AUX_B 0x6c304 -#define ICL_PORT_PCS_DW1_GRP (port) _MMIO_PORT(port,\ - _ICL_PORT_PCS_DW1_GRP_A, \ - _ICL_PORT_PCS_DW1_GRP_B) -#define ICL_PORT_PCS_DW1_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_PCS_DW1_LN0_A, \ - _ICL_PORT_PCS_DW1_LN0_B) -#define ICL_PORT_PCS_DW1_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_PCS_DW1_AUX_A, \ - _ICL_PORT_PCS_DW1_AUX_B) +#define _ICL_PORT_PCS_AUX 0x300 +#define _ICL_PORT_PCS_GRP 0x600 +#define _ICL_PORT_PCS_LN (ln) (0x800 + (ln) * 0x100) +#define _ICL_PORT_PCS_DW_AUX (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_AUX + 4 * (dw)) +#define _ICL_PORT_PCS_DW_GRP (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_GRP + 4 * (dw)) +#define _ICL_PORT_PCS_DW_LN (port, dw, ln) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_LN(ln) + 4 * (dw)) +#define ICL_PORT_PCS_DW1_AUX (port) _MMIO(_ICL_PORT_PCS_DW_AUX(port, 1)) +#define ICL_PORT_PCS_DW1_GRP (port) _MMIO(_ICL_PORT_PCS_DW_GRP(port, 1)) +#define ICL_PORT_PCS_DW1_LN0 (port) _MMIO(_ICL_PORT_PCS_DW_LN(port, 1, 0))#define COMMON_KEEPER_EN (1 << 26)/* CNL/ICL Port TX registers */ @@ -1809,23 +1790,22 @@ enum i915_power_well_id { _CNL_PORT_TX_F_LN0_OFFSET) + \ 4 * (dw)) +#define _ICL_PORT_TX_AUX 0x380 +#define _ICL_PORT_TX_GRP 0x680 +#define _ICL_PORT_TX_LN (ln) (0x880 + (ln) * 0x100) + +#define _ICL_PORT_TX_DW_AUX (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_AUX + 4 * (dw)) +#define _ICL_PORT_TX_DW_GRP (port, dw) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_GRP + 4 * (dw)) +#define _ICL_PORT_TX_DW_LN (port, dw, ln) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_LN(ln) + 4 * (dw)) +#define CNL_PORT_TX_DW2_GRP (port) _MMIO(_CNL_PORT_TX_DW_GRP((port), 2))#define CNL_PORT_TX_DW2_LN0 (port) _MMIO(_CNL_PORT_TX_DW_LN0((port), 2)) -#define _ICL_PORT_TX_DW2_GRP_A 0x162688 -#define _ICL_PORT_TX_DW2_GRP_B 0x6C688 -#define _ICL_PORT_TX_DW2_LN0_A 0x162888 -#define _ICL_PORT_TX_DW2_LN0_B 0x6C888 -#define _ICL_PORT_TX_DW2_AUX_A 0x162388 -#define _ICL_PORT_TX_DW2_AUX_B 0x6c388 -#define ICL_PORT_TX_DW2_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_GRP_A, \ - _ICL_PORT_TX_DW2_GRP_B) -#define ICL_PORT_TX_DW2_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_LN0_A, \ - _ICL_PORT_TX_DW2_LN0_B) -#define ICL_PORT_TX_DW2_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_AUX_A, \ - _ICL_PORT_TX_DW2_AUX_B) +#define ICL_PORT_TX_DW2_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX((port), 2)) +#define ICL_PORT_TX_DW2_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP((port), 2)) +#define ICL_PORT_TX_DW2_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN((port), 2, 0))#define SWING_SEL_UPPER (x) (((x) >> 3) << 15)#define SWING_SEL_UPPER_MASK (1 << 15)#define SWING_SEL_LOWER (x) (((x) & 0x7) << 11)@@ -1842,24 +1822,10 @@ enum i915_power_well_id {#define CNL_PORT_TX_DW4_LN (port, ln) _MMIO(_CNL_PORT_TX_DW_LN0((port), 4) + \ ((ln) * (_CNL_PORT_TX_DW4_LN1_AE - \ _CNL_PORT_TX_DW4_LN0_AE))) -#define _ICL_PORT_TX_DW4_GRP_A 0x162690 -#define _ICL_PORT_TX_DW4_GRP_B 0x6C690 -#define _ICL_PORT_TX_DW4_LN0_A 0x162890 -#define _ICL_PORT_TX_DW4_LN1_A 0x162990 -#define _ICL_PORT_TX_DW4_LN0_B 0x6C890 -#define _ICL_PORT_TX_DW4_AUX_A 0x162390 -#define _ICL_PORT_TX_DW4_AUX_B 0x6c390 -#define ICL_PORT_TX_DW4_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW4_GRP_A, \ - _ICL_PORT_TX_DW4_GRP_B) -#define ICL_PORT_TX_DW4_LN (port, ln) _MMIO(_PORT(port, \ - _ICL_PORT_TX_DW4_LN0_A, \ - _ICL_PORT_TX_DW4_LN0_B) + \ - ((ln) * (_ICL_PORT_TX_DW4_LN1_A - \ - _ICL_PORT_TX_DW4_LN0_A))) -#define ICL_PORT_TX_DW4_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW4_AUX_A, \ - _ICL_PORT_TX_DW4_AUX_B) +#define ICL_PORT_TX_DW4_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX((port), 4)) +#define ICL_PORT_TX_DW4_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP((port), 4)) +#define ICL_PORT_TX_DW4_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN((port), 4, 0)) +#define ICL_PORT_TX_DW4_LN (port, ln) _MMIO(_ICL_PORT_TX_DW_LN((port), 4, ln))#define LOADGEN_SELECT (1 << 31)#define POST_CURSOR_1 (x) ((x) << 12)#define POST_CURSOR_1_MASK (0x3F << 12)@@ -1870,21 +1836,9 @@ enum i915_power_well_id {#define CNL_PORT_TX_DW5_GRP (port) _MMIO(_CNL_PORT_TX_DW_GRP((port), 5))#define CNL_PORT_TX_DW5_LN0 (port) _MMIO(_CNL_PORT_TX_DW_LN0((port), 5)) -#define _ICL_PORT_TX_DW5_GRP_A 0x162694 -#define _ICL_PORT_TX_DW5_GRP_B 0x6C694 -#define _ICL_PORT_TX_DW5_LN0_A 0x162894 -#define _ICL_PORT_TX_DW5_LN0_B 0x6C894 -#define _ICL_PORT_TX_DW5_AUX_A 0x162394 -#define _ICL_PORT_TX_DW5_AUX_B 0x6c394 -#define ICL_PORT_TX_DW5_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_GRP_A, \ - _ICL_PORT_TX_DW5_GRP_B) -#define ICL_PORT_TX_DW5_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_LN0_A, \ - _ICL_PORT_TX_DW5_LN0_B) -#define ICL_PORT_TX_DW5_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_AUX_A, \ - _ICL_PORT_TX_DW5_AUX_B) +#define ICL_PORT_TX_DW5_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX((port), 5)) +#define ICL_PORT_TX_DW5_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP((port), 5)) +#define ICL_PORT_TX_DW5_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN((port), 5, 0))#define TX_TRAINING_EN (1 << 31)#define TAP2_DISABLE (1 << 30)#define TAP3_DISABLE (1 << 29)Signature · 1 line
2.16.2
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 1/1 drm/i915/icl: Introduce new macros to get combophy registers
combo-phy register instances are at same offset from base for each combo-phy port, i.e.
Port A base offset: 0x16200
Port B base offset: 0x6C000
All the other addresses for both ports can be derived by calculating offset to these base addresses.
PORT_CL_DW_OFFSET 0x0
PORT_CL_DW<x> 0 + x * 4
PORT_COMP_OFFSET 0x100
PORT_COMP_DW<x> 0x100 + x * 4
PORT_PCS_AUX_OFFSET 0x300 PORT_PCS_GRP_OFFSET 0x600 PORT_PCS_LN<y>_OFFSET 0x800 + y * 0x100
PORT_TX_AUX_OFFSET 0x380 PORT_TX_GRP_OFFSET 0x680 PORT_TX_LN<y>_OFFSET 0x880 + y * 0x100
And inside each PORT_TX_[AUX|GRP|LN] we add dw * 4.
Based on original patch by Mahesh Kumar <[email protected]>.
v2: make port, dw and ln arguments follow the order in
register's name
--- drivers/gpu/drm/i915/i915_reg.h | 163 ++++++++++++-------------------- 1 file changed, 59 insertions(+), 104 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +59 -104
@@ -1658,20 +1658,21 @@ enum i915_power_well_id {/* * CNL/ICL Port/COMBO-PHY Registers */ +#define _ICL_COMBOPHY_A 0x162000 +#define _ICL_COMBOPHY_B 0x6C000 +#define _ICL_COMBOPHY (port) _PICK(port, _ICL_COMBOPHY_A, \ + _ICL_COMBOPHY_B) +/* CNL/ICL Port CL_DW registers */ -#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014) -#define _ICL_PORT_CL_DW5_A 0x162014 -#define _ICL_PORT_CL_DW5_B 0x6C014 -#define ICL_PORT_CL_DW5 (port) _MMIO_PORT(port, _ICL_PORT_CL_DW5_A, \ - _ICL_PORT_CL_DW5_B) +#define _ICL_PORT_CL_DW (dw, port) (_ICL_COMBOPHY(port) + \ + 4 * (dw)) + +#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014) +#define ICL_PORT_CL_DW5 (port) _MMIO(_ICL_PORT_CL_DW(5, port))#define CL_POWER_DOWN_ENABLE (1 << 4)#define SUS_CLOCK_CONFIG (3 << 0) -#define _CNL_PORT_CL_DW10_A 0x162028 -#define _ICL_PORT_CL_DW10_B 0x6c028 -#define ICL_PORT_CL_DW10 (port) _MMIO_PORT(port, \ - _CNL_PORT_CL_DW10_A, \ - _ICL_PORT_CL_DW10_B) +#define ICL_PORT_CL_DW10 (port) _MMIO(_ICL_PORT_CL_DW(10, port))#define PG_SEQ_DELAY_OVERRIDE_MASK (3 << 25)#define PG_SEQ_DELAY_OVERRIDE_SHIFT 25#define PG_SEQ_DELAY_OVERRIDE_ENABLE (1 << 24)
@@ -1687,31 +1688,23 @@ enum i915_power_well_id {#define PWR_DOWN_LN_MASK (0xf << 4)#define PWR_DOWN_LN_SHIFT 4 -#define _ICL_PORT_CL_DW12_A 0x162030 -#define _ICL_PORT_CL_DW12_B 0x6C030 +#define ICL_PORT_CL_DW12 (port) _MMIO(_ICL_PORT_CL_DW(12, port))#define ICL_LANE_ENABLE_AUX (1 << 0) -#define ICL_PORT_CL_DW12 (port) _MMIO_PORT((port), \ - _ICL_PORT_CL_DW12_A, \ - _ICL_PORT_CL_DW12_B)/* CNL/ICL Port COMP_DW registers */ +#define _ICL_PORT_COMP 0x100 +#define _ICL_PORT_COMP_DW (dw, port) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_COMP + 4 * (dw)) +#define CNL_PORT_COMP_DW0 _MMIO(0x162100) -#define _ICL_PORT_COMP_DW0_A 0x162100 -#define _ICL_PORT_COMP_DW0_B 0x6C100 -#define ICL_PORT_COMP_DW0 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW0_A, \ - _ICL_PORT_COMP_DW0_B) +#define ICL_PORT_COMP_DW0 (port) _MMIO(_ICL_PORT_COMP_DW(0, port))#define COMP_INIT (1 << 31)#define CNL_PORT_COMP_DW1 _MMIO(0x162104) -#define _ICL_PORT_COMP_DW1_A 0x162104 -#define _ICL_PORT_COMP_DW1_B 0x6C104 -#define ICL_PORT_COMP_DW1 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW1_A, \ - _ICL_PORT_COMP_DW1_B) +#define ICL_PORT_COMP_DW1 (port) _MMIO(_ICL_PORT_COMP_DW(1, port)) +#define CNL_PORT_COMP_DW3 _MMIO(0x16210c) -#define _ICL_PORT_COMP_DW3_A 0x16210C -#define _ICL_PORT_COMP_DW3_B 0x6C10C -#define ICL_PORT_COMP_DW3 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW3_A, \ - _ICL_PORT_COMP_DW3_B) +#define ICL_PORT_COMP_DW3 (port) _MMIO(_ICL_PORT_COMP_DW(3, port))#define PROCESS_INFO_DOT_0 (0 << 26)#define PROCESS_INFO_DOT_1 (1 << 26)#define PROCESS_INFO_DOT_4 (2 << 26)
@@ -1724,17 +1717,10 @@ enum i915_power_well_id {#define VOLTAGE_INFO_SHIFT 24#define CNL_PORT_COMP_DW9 _MMIO(0x162124) -#define _ICL_PORT_COMP_DW9_A 0x162124 -#define _ICL_PORT_COMP_DW9_B 0x6C124 -#define ICL_PORT_COMP_DW9 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW9_A, \ - _ICL_PORT_COMP_DW9_B) +#define ICL_PORT_COMP_DW9 (port) _MMIO(_ICL_PORT_COMP_DW(9, port))#define CNL_PORT_COMP_DW10 _MMIO(0x162128) -#define _ICL_PORT_COMP_DW10_A 0x162128 -#define _ICL_PORT_COMP_DW10_B 0x6C128 -#define ICL_PORT_COMP_DW10 (port) _MMIO_PORT(port, \ - _ICL_PORT_COMP_DW10_A, \ - _ICL_PORT_COMP_DW10_B) +#define ICL_PORT_COMP_DW10 (port) _MMIO(_ICL_PORT_COMP_DW(10, port))/* CNL/ICL Port PCS registers */ #define _CNL_PORT_PCS_DW1_GRP_AE 0x162304
@@ -1754,7 +1740,6 @@ enum i915_power_well_id { _CNL_PORT_PCS_DW1_GRP_D, \ _CNL_PORT_PCS_DW1_GRP_AE, \ _CNL_PORT_PCS_DW1_GRP_F)) -#define CNL_PORT_PCS_DW1_LN0 (port) _MMIO(_PICK(port, \ _CNL_PORT_PCS_DW1_LN0_AE, \ _CNL_PORT_PCS_DW1_LN0_B, \
@@ -1763,21 +1748,18 @@ enum i915_power_well_id { _CNL_PORT_PCS_DW1_LN0_AE, \ _CNL_PORT_PCS_DW1_LN0_F)) -#define _ICL_PORT_PCS_DW1_GRP_A 0x162604 -#define _ICL_PORT_PCS_DW1_GRP_B 0x6C604 -#define _ICL_PORT_PCS_DW1_LN0_A 0x162804 -#define _ICL_PORT_PCS_DW1_LN0_B 0x6C804 -#define _ICL_PORT_PCS_DW1_AUX_A 0x162304 -#define _ICL_PORT_PCS_DW1_AUX_B 0x6c304 -#define ICL_PORT_PCS_DW1_GRP (port) _MMIO_PORT(port,\ - _ICL_PORT_PCS_DW1_GRP_A, \ - _ICL_PORT_PCS_DW1_GRP_B) -#define ICL_PORT_PCS_DW1_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_PCS_DW1_LN0_A, \ - _ICL_PORT_PCS_DW1_LN0_B) -#define ICL_PORT_PCS_DW1_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_PCS_DW1_AUX_A, \ - _ICL_PORT_PCS_DW1_AUX_B) +#define _ICL_PORT_PCS_AUX 0x300 +#define _ICL_PORT_PCS_GRP 0x600 +#define _ICL_PORT_PCS_LN (ln) (0x800 + (ln) * 0x100) +#define _ICL_PORT_PCS_DW_AUX (dw, port) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_AUX + 4 * (dw)) +#define _ICL_PORT_PCS_DW_GRP (dw, port) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_GRP + 4 * (dw)) +#define _ICL_PORT_PCS_DW_LN (dw, ln, port) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_LN(ln) + 4 * (dw)) +#define ICL_PORT_PCS_DW1_AUX (port) _MMIO(_ICL_PORT_PCS_DW_AUX(1, port)) +#define ICL_PORT_PCS_DW1_GRP (port) _MMIO(_ICL_PORT_PCS_DW_GRP(1, port)) +#define ICL_PORT_PCS_DW1_LN0 (port) _MMIO(_ICL_PORT_PCS_DW_LN(1, 0, port))#define COMMON_KEEPER_EN (1 << 26)/* CNL/ICL Port TX registers */
@@ -1808,23 +1790,22 @@ enum i915_power_well_id { _CNL_PORT_TX_F_LN0_OFFSET) + \ 4 * (dw)) -#define CNL_PORT_TX_DW2_GRP (port) _MMIO(_CNL_PORT_TX_DW_GRP((port), 2)) -#define CNL_PORT_TX_DW2_LN0 (port) _MMIO(_CNL_PORT_TX_DW_LN0((port), 2)) -#define _ICL_PORT_TX_DW2_GRP_A 0x162688 -#define _ICL_PORT_TX_DW2_GRP_B 0x6C688 -#define _ICL_PORT_TX_DW2_LN0_A 0x162888 -#define _ICL_PORT_TX_DW2_LN0_B 0x6C888 -#define _ICL_PORT_TX_DW2_AUX_A 0x162388 -#define _ICL_PORT_TX_DW2_AUX_B 0x6c388 -#define ICL_PORT_TX_DW2_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_GRP_A, \ - _ICL_PORT_TX_DW2_GRP_B) -#define ICL_PORT_TX_DW2_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_LN0_A, \ - _ICL_PORT_TX_DW2_LN0_B) -#define ICL_PORT_TX_DW2_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_AUX_A, \ - _ICL_PORT_TX_DW2_AUX_B) +#define _ICL_PORT_TX_AUX 0x380 +#define _ICL_PORT_TX_GRP 0x680 +#define _ICL_PORT_TX_LN (ln) (0x880 + (ln) * 0x100) + +#define _ICL_PORT_TX_DW_AUX (dw, port) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_AUX + 4 * (dw)) +#define _ICL_PORT_TX_DW_GRP (dw, port) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_GRP + 4 * (dw)) +#define _ICL_PORT_TX_DW_LN (dw, ln, port) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_LN(ln) + 4 * (dw)) + +#define CNL_PORT_TX_DW2_GRP (port) _MMIO(_CNL_PORT_TX_DW_GRP(2, port)) +#define CNL_PORT_TX_DW2_LN0 (port) _MMIO(_CNL_PORT_TX_DW_LN0(2, port)) +#define ICL_PORT_TX_DW2_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX(2, port)) +#define ICL_PORT_TX_DW2_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP(2, port)) +#define ICL_PORT_TX_DW2_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN(2, 0, port))#define SWING_SEL_UPPER (x) (((x) >> 3) << 15)#define SWING_SEL_UPPER_MASK (1 << 15)#define SWING_SEL_LOWER (x) (((x) & 0x7) << 11)
@@ -1841,24 +1822,10 @@ enum i915_power_well_id {#define CNL_PORT_TX_DW4_LN (port, ln) _MMIO(_CNL_PORT_TX_DW_LN0((port), 4) + \ ((ln) * (_CNL_PORT_TX_DW4_LN1_AE - \ _CNL_PORT_TX_DW4_LN0_AE))) -#define _ICL_PORT_TX_DW4_GRP_A 0x162690 -#define _ICL_PORT_TX_DW4_GRP_B 0x6C690 -#define _ICL_PORT_TX_DW4_LN0_A 0x162890 -#define _ICL_PORT_TX_DW4_LN1_A 0x162990 -#define _ICL_PORT_TX_DW4_LN0_B 0x6C890 -#define _ICL_PORT_TX_DW4_AUX_A 0x162390 -#define _ICL_PORT_TX_DW4_AUX_B 0x6c390 -#define ICL_PORT_TX_DW4_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW4_GRP_A, \ - _ICL_PORT_TX_DW4_GRP_B) -#define ICL_PORT_TX_DW4_LN (port, ln) _MMIO(_PORT(port, \ - _ICL_PORT_TX_DW4_LN0_A, \ - _ICL_PORT_TX_DW4_LN0_B) + \ - ((ln) * (_ICL_PORT_TX_DW4_LN1_A - \ - _ICL_PORT_TX_DW4_LN0_A))) -#define ICL_PORT_TX_DW4_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW4_AUX_A, \ - _ICL_PORT_TX_DW4_AUX_B) +#define ICL_PORT_TX_DW4_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX(4, port)) +#define ICL_PORT_TX_DW4_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP(4, port)) +#define ICL_PORT_TX_DW4_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN(4, 0, port)) +#define ICL_PORT_TX_DW4_LN (port, ln) _MMIO(_ICL_PORT_TX_DW_LN(4, ln, port))#define LOADGEN_SELECT (1 << 31)#define POST_CURSOR_1 (x) ((x) << 12)#define POST_CURSOR_1_MASK (0x3F << 12)
@@ -1867,23 +1834,11 @@ enum i915_power_well_id {#define CURSOR_COEFF (x) ((x) << 0)#define CURSOR_COEFF_MASK (0x3F << 0) -#define CNL_PORT_TX_DW5_GRP (port) _MMIO(_CNL_PORT_TX_DW_GRP((port), 5)) -#define CNL_PORT_TX_DW5_LN0 (port) _MMIO(_CNL_PORT_TX_DW_LN0((port), 5)) -#define _ICL_PORT_TX_DW5_GRP_A 0x162694 -#define _ICL_PORT_TX_DW5_GRP_B 0x6C694 -#define _ICL_PORT_TX_DW5_LN0_A 0x162894 -#define _ICL_PORT_TX_DW5_LN0_B 0x6C894 -#define _ICL_PORT_TX_DW5_AUX_A 0x162394 -#define _ICL_PORT_TX_DW5_AUX_B 0x6c394 -#define ICL_PORT_TX_DW5_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_GRP_A, \ - _ICL_PORT_TX_DW5_GRP_B) -#define ICL_PORT_TX_DW5_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_LN0_A, \ - _ICL_PORT_TX_DW5_LN0_B) -#define ICL_PORT_TX_DW5_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_AUX_A, \ - _ICL_PORT_TX_DW5_AUX_B) +#define CNL_PORT_TX_DW5_GRP (port) _MMIO(_CNL_PORT_TX_DW_GRP(5, port)) +#define CNL_PORT_TX_DW5_LN0 (port) _MMIO(_CNL_PORT_TX_DW_LN0(5, port)) +#define ICL_PORT_TX_DW5_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX(5, port)) +#define ICL_PORT_TX_DW5_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP(5, port)) +#define ICL_PORT_TX_DW5_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN(5, 0, port))#define TX_TRAINING_EN (1 << 31)#define TAP2_DISABLE (1 << 30)#define TAP3_DISABLE (1 << 29)
Signature · 6 lines
2.19.1.1.g8c3cf03f71 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerRe: [PATCH v2] drm/i915/icl: Introduce new macros to get combophy registers
Quoted 27 lines · Lucas De Marchi
combo-phy register instances are at same offset from base for each combo-phy port, i.e.
Port A base offset:
0x16200
Port B base offset:0x6C000All the other addresses for both ports can be derived by calculating offset to these base addresses.
PORT_CL_DW_OFFSET0x0
PORT_CL_DW<x> 0 + x * 4
PORT_COMP_OFFSET0x100
PORT_COMP_DW<x>0x100+ x * 4PORT_PCS_AUX_OFFSET 0x300 PORT_PCS_GRP_OFFSET 0x600 PORT_PCS_LN<y>_OFFSET 0x800 + y * 0x100PORT_TX_AUX_OFFSET 0x380 PORT_TX_GRP_OFFSET 0x680 PORT_TX_LN<y>_OFFSET 0x880 + y * 0x100And inside each PORT_TX_[AUX|GRP|LN] we add
dw * 4.Based on original patch by Mahesh Kumar <[email protected]>.
Quoted 7 lines
v2: make port, dw and ln arguments follow the order in
register's nameSigned-off-by Lucas De Marchi <[email protected]>Signed-off-by Mahesh Kumar <[email protected]>Cc Rodrigo Vivi <[email protected]>Reviewed-by Rodrigo Vivi <[email protected]>
Series pushed to dinq. Thanks
Quoted 248 lines
--- drivers/gpu/drm/i915/i915_reg.h | 163 ++++++++++++-------------------- 1 file changed, 59 insertions(+), 104 deletions(-)drivers/gpu/drm/i915/i915_reg.h +59
-104@@ -1658,20 +1658,21 @@ enum i915_power_well_id {/* * CNL/ICL Port/COMBO-PHY Registers */ +#define _ICL_COMBOPHY_A 0x162000 +#define _ICL_COMBOPHY_B 0x6C000 +#define _ICL_COMBOPHY (port) _PICK(port, _ICL_COMBOPHY_A, \ + _ICL_COMBOPHY_B) +/* CNL/ICL Port CL_DW registers */ -#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014) -#define _ICL_PORT_CL_DW5_A 0x162014 -#define _ICL_PORT_CL_DW5_B 0x6C014 -#define ICL_PORT_CL_DW5 (port) _MMIO_PORT(port, _ICL_PORT_CL_DW5_A, \ - _ICL_PORT_CL_DW5_B) +#define _ICL_PORT_CL_DW (dw, port) (_ICL_COMBOPHY(port) + \ + 4 * (dw)) + +#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014) +#define ICL_PORT_CL_DW5 (port) _MMIO(_ICL_PORT_CL_DW(5, port))#define CL_POWER_DOWN_ENABLE (1 << 4)#define SUS_CLOCK_CONFIG (3 << 0) -#define _CNL_PORT_CL_DW10_A 0x162028 -#define _ICL_PORT_CL_DW10_B 0x6c028 -#define ICL_PORT_CL_DW10 (port) _MMIO_PORT(port, \ - _CNL_PORT_CL_DW10_A, \ - _ICL_PORT_CL_DW10_B) +#define ICL_PORT_CL_DW10 (port) _MMIO(_ICL_PORT_CL_DW(10, port))#define PG_SEQ_DELAY_OVERRIDE_MASK (3 << 25)#define PG_SEQ_DELAY_OVERRIDE_SHIFT 25#define PG_SEQ_DELAY_OVERRIDE_ENABLE (1 << 24)@@ -1687,31 +1688,23 @@ enum i915_power_well_id {#define PWR_DOWN_LN_MASK (0xf << 4)#define PWR_DOWN_LN_SHIFT 4 -#define _ICL_PORT_CL_DW12_A 0x162030 -#define _ICL_PORT_CL_DW12_B 0x6C030 +#define ICL_PORT_CL_DW12 (port) _MMIO(_ICL_PORT_CL_DW(12, port))#define ICL_LANE_ENABLE_AUX (1 << 0) -#define ICL_PORT_CL_DW12 (port) _MMIO_PORT((port), \ - _ICL_PORT_CL_DW12_A, \ - _ICL_PORT_CL_DW12_B)/* CNL/ICL Port COMP_DW registers */ +#define _ICL_PORT_COMP 0x100 +#define _ICL_PORT_COMP_DW (dw, port) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_COMP + 4 * (dw)) +#define CNL_PORT_COMP_DW0 _MMIO(0x162100) -#define _ICL_PORT_COMP_DW0_A 0x162100 -#define _ICL_PORT_COMP_DW0_B 0x6C100 -#define ICL_PORT_COMP_DW0 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW0_A, \ - _ICL_PORT_COMP_DW0_B) +#define ICL_PORT_COMP_DW0 (port) _MMIO(_ICL_PORT_COMP_DW(0, port))#define COMP_INIT (1 << 31)#define CNL_PORT_COMP_DW1 _MMIO(0x162104) -#define _ICL_PORT_COMP_DW1_A 0x162104 -#define _ICL_PORT_COMP_DW1_B 0x6C104 -#define ICL_PORT_COMP_DW1 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW1_A, \ - _ICL_PORT_COMP_DW1_B) +#define ICL_PORT_COMP_DW1 (port) _MMIO(_ICL_PORT_COMP_DW(1, port)) +#define CNL_PORT_COMP_DW3 _MMIO(0x16210c) -#define _ICL_PORT_COMP_DW3_A 0x16210C -#define _ICL_PORT_COMP_DW3_B 0x6C10C -#define ICL_PORT_COMP_DW3 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW3_A, \ - _ICL_PORT_COMP_DW3_B) +#define ICL_PORT_COMP_DW3 (port) _MMIO(_ICL_PORT_COMP_DW(3, port))#define PROCESS_INFO_DOT_0 (0 << 26)#define PROCESS_INFO_DOT_1 (1 << 26)#define PROCESS_INFO_DOT_4 (2 << 26)@@ -1724,17 +1717,10 @@ enum i915_power_well_id {#define VOLTAGE_INFO_SHIFT 24#define CNL_PORT_COMP_DW9 _MMIO(0x162124) -#define _ICL_PORT_COMP_DW9_A 0x162124 -#define _ICL_PORT_COMP_DW9_B 0x6C124 -#define ICL_PORT_COMP_DW9 (port) _MMIO_PORT(port, _ICL_PORT_COMP_DW9_A, \ - _ICL_PORT_COMP_DW9_B) +#define ICL_PORT_COMP_DW9 (port) _MMIO(_ICL_PORT_COMP_DW(9, port))#define CNL_PORT_COMP_DW10 _MMIO(0x162128) -#define _ICL_PORT_COMP_DW10_A 0x162128 -#define _ICL_PORT_COMP_DW10_B 0x6C128 -#define ICL_PORT_COMP_DW10 (port) _MMIO_PORT(port, \ - _ICL_PORT_COMP_DW10_A, \ - _ICL_PORT_COMP_DW10_B) +#define ICL_PORT_COMP_DW10 (port) _MMIO(_ICL_PORT_COMP_DW(10, port))/* CNL/ICL Port PCS registers */ #define _CNL_PORT_PCS_DW1_GRP_AE 0x162304@@ -1754,7 +1740,6 @@ enum i915_power_well_id { _CNL_PORT_PCS_DW1_GRP_D, \ _CNL_PORT_PCS_DW1_GRP_AE, \ _CNL_PORT_PCS_DW1_GRP_F)) -#define CNL_PORT_PCS_DW1_LN0 (port) _MMIO(_PICK(port, \ _CNL_PORT_PCS_DW1_LN0_AE, \ _CNL_PORT_PCS_DW1_LN0_B, \@@ -1763,21 +1748,18 @@ enum i915_power_well_id { _CNL_PORT_PCS_DW1_LN0_AE, \ _CNL_PORT_PCS_DW1_LN0_F)) -#define _ICL_PORT_PCS_DW1_GRP_A 0x162604 -#define _ICL_PORT_PCS_DW1_GRP_B 0x6C604 -#define _ICL_PORT_PCS_DW1_LN0_A 0x162804 -#define _ICL_PORT_PCS_DW1_LN0_B 0x6C804 -#define _ICL_PORT_PCS_DW1_AUX_A 0x162304 -#define _ICL_PORT_PCS_DW1_AUX_B 0x6c304 -#define ICL_PORT_PCS_DW1_GRP (port) _MMIO_PORT(port,\ - _ICL_PORT_PCS_DW1_GRP_A, \ - _ICL_PORT_PCS_DW1_GRP_B) -#define ICL_PORT_PCS_DW1_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_PCS_DW1_LN0_A, \ - _ICL_PORT_PCS_DW1_LN0_B) -#define ICL_PORT_PCS_DW1_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_PCS_DW1_AUX_A, \ - _ICL_PORT_PCS_DW1_AUX_B) +#define _ICL_PORT_PCS_AUX 0x300 +#define _ICL_PORT_PCS_GRP 0x600 +#define _ICL_PORT_PCS_LN (ln) (0x800 + (ln) * 0x100) +#define _ICL_PORT_PCS_DW_AUX (dw, port) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_AUX + 4 * (dw)) +#define _ICL_PORT_PCS_DW_GRP (dw, port) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_GRP + 4 * (dw)) +#define _ICL_PORT_PCS_DW_LN (dw, ln, port) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_PCS_LN(ln) + 4 * (dw)) +#define ICL_PORT_PCS_DW1_AUX (port) _MMIO(_ICL_PORT_PCS_DW_AUX(1, port)) +#define ICL_PORT_PCS_DW1_GRP (port) _MMIO(_ICL_PORT_PCS_DW_GRP(1, port)) +#define ICL_PORT_PCS_DW1_LN0 (port) _MMIO(_ICL_PORT_PCS_DW_LN(1, 0, port))#define COMMON_KEEPER_EN (1 << 26)/* CNL/ICL Port TX registers */ @@ -1808,23 +1790,22 @@ enum i915_power_well_id { _CNL_PORT_TX_F_LN0_OFFSET) + \ 4 * (dw)) -#define CNL_PORT_TX_DW2_GRP (port) _MMIO(_CNL_PORT_TX_DW_GRP((port), 2)) -#define CNL_PORT_TX_DW2_LN0 (port) _MMIO(_CNL_PORT_TX_DW_LN0((port), 2)) -#define _ICL_PORT_TX_DW2_GRP_A 0x162688 -#define _ICL_PORT_TX_DW2_GRP_B 0x6C688 -#define _ICL_PORT_TX_DW2_LN0_A 0x162888 -#define _ICL_PORT_TX_DW2_LN0_B 0x6C888 -#define _ICL_PORT_TX_DW2_AUX_A 0x162388 -#define _ICL_PORT_TX_DW2_AUX_B 0x6c388 -#define ICL_PORT_TX_DW2_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_GRP_A, \ - _ICL_PORT_TX_DW2_GRP_B) -#define ICL_PORT_TX_DW2_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_LN0_A, \ - _ICL_PORT_TX_DW2_LN0_B) -#define ICL_PORT_TX_DW2_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW2_AUX_A, \ - _ICL_PORT_TX_DW2_AUX_B) +#define _ICL_PORT_TX_AUX 0x380 +#define _ICL_PORT_TX_GRP 0x680 +#define _ICL_PORT_TX_LN (ln) (0x880 + (ln) * 0x100) + +#define _ICL_PORT_TX_DW_AUX (dw, port) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_AUX + 4 * (dw)) +#define _ICL_PORT_TX_DW_GRP (dw, port) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_GRP + 4 * (dw)) +#define _ICL_PORT_TX_DW_LN (dw, ln, port) (_ICL_COMBOPHY(port) + \ + _ICL_PORT_TX_LN(ln) + 4 * (dw)) + +#define CNL_PORT_TX_DW2_GRP (port) _MMIO(_CNL_PORT_TX_DW_GRP(2, port)) +#define CNL_PORT_TX_DW2_LN0 (port) _MMIO(_CNL_PORT_TX_DW_LN0(2, port)) +#define ICL_PORT_TX_DW2_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX(2, port)) +#define ICL_PORT_TX_DW2_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP(2, port)) +#define ICL_PORT_TX_DW2_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN(2, 0, port))#define SWING_SEL_UPPER (x) (((x) >> 3) << 15)#define SWING_SEL_UPPER_MASK (1 << 15)#define SWING_SEL_LOWER (x) (((x) & 0x7) << 11)@@ -1841,24 +1822,10 @@ enum i915_power_well_id {#define CNL_PORT_TX_DW4_LN (port, ln) _MMIO(_CNL_PORT_TX_DW_LN0((port), 4) + \ ((ln) * (_CNL_PORT_TX_DW4_LN1_AE - \ _CNL_PORT_TX_DW4_LN0_AE))) -#define _ICL_PORT_TX_DW4_GRP_A 0x162690 -#define _ICL_PORT_TX_DW4_GRP_B 0x6C690 -#define _ICL_PORT_TX_DW4_LN0_A 0x162890 -#define _ICL_PORT_TX_DW4_LN1_A 0x162990 -#define _ICL_PORT_TX_DW4_LN0_B 0x6C890 -#define _ICL_PORT_TX_DW4_AUX_A 0x162390 -#define _ICL_PORT_TX_DW4_AUX_B 0x6c390 -#define ICL_PORT_TX_DW4_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW4_GRP_A, \ - _ICL_PORT_TX_DW4_GRP_B) -#define ICL_PORT_TX_DW4_LN (port, ln) _MMIO(_PORT(port, \ - _ICL_PORT_TX_DW4_LN0_A, \ - _ICL_PORT_TX_DW4_LN0_B) + \ - ((ln) * (_ICL_PORT_TX_DW4_LN1_A - \ - _ICL_PORT_TX_DW4_LN0_A))) -#define ICL_PORT_TX_DW4_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW4_AUX_A, \ - _ICL_PORT_TX_DW4_AUX_B) +#define ICL_PORT_TX_DW4_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX(4, port)) +#define ICL_PORT_TX_DW4_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP(4, port)) +#define ICL_PORT_TX_DW4_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN(4, 0, port)) +#define ICL_PORT_TX_DW4_LN (port, ln) _MMIO(_ICL_PORT_TX_DW_LN(4, ln, port))#define LOADGEN_SELECT (1 << 31)#define POST_CURSOR_1 (x) ((x) << 12)#define POST_CURSOR_1_MASK (0x3F << 12)@@ -1867,23 +1834,11 @@ enum i915_power_well_id {#define CURSOR_COEFF (x) ((x) << 0)#define CURSOR_COEFF_MASK (0x3F << 0) -#define CNL_PORT_TX_DW5_GRP (port) _MMIO(_CNL_PORT_TX_DW_GRP((port), 5)) -#define CNL_PORT_TX_DW5_LN0 (port) _MMIO(_CNL_PORT_TX_DW_LN0((port), 5)) -#define _ICL_PORT_TX_DW5_GRP_A 0x162694 -#define _ICL_PORT_TX_DW5_GRP_B 0x6C694 -#define _ICL_PORT_TX_DW5_LN0_A 0x162894 -#define _ICL_PORT_TX_DW5_LN0_B 0x6C894 -#define _ICL_PORT_TX_DW5_AUX_A 0x162394 -#define _ICL_PORT_TX_DW5_AUX_B 0x6c394 -#define ICL_PORT_TX_DW5_GRP (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_GRP_A, \ - _ICL_PORT_TX_DW5_GRP_B) -#define ICL_PORT_TX_DW5_LN0 (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_LN0_A, \ - _ICL_PORT_TX_DW5_LN0_B) -#define ICL_PORT_TX_DW5_AUX (port) _MMIO_PORT(port, \ - _ICL_PORT_TX_DW5_AUX_A, \ - _ICL_PORT_TX_DW5_AUX_B) +#define CNL_PORT_TX_DW5_GRP (port) _MMIO(_CNL_PORT_TX_DW_GRP(5, port)) +#define CNL_PORT_TX_DW5_LN0 (port) _MMIO(_CNL_PORT_TX_DW_LN0(5, port)) +#define ICL_PORT_TX_DW5_AUX (port) _MMIO(_ICL_PORT_TX_DW_AUX(5, port)) +#define ICL_PORT_TX_DW5_GRP (port) _MMIO(_ICL_PORT_TX_DW_GRP(5, port)) +#define ICL_PORT_TX_DW5_LN0 (port) _MMIO(_ICL_PORT_TX_DW_LN(5, 0, port))#define TX_TRAINING_EN (1 << 31)#define TAP2_DISABLE (1 << 30)#define TAP3_DISABLE (1 << 29)Signature · 6 lines
2.19.1.1.g8c3cf03f71 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 8/8 drm/i915/icl: Fix DDI/TC port clk_off bits
In reply to Mahesh KumarDDI/TC clock-off bits are not equally distanced. TC1-3 bits are from offset 12 & TC4 is at offset 21.
Create a function to choose correct clk-off bit.
--- drivers/gpu/drm/i915/i915_reg.h | 3 +++ drivers/gpu/drm/i915/intel_ddi.c | 21 ++++++++++++++++++--- 2 files changed, 21 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -9302,6 +9302,9 @@ enum skl_power_gate {#define DPCLKA_CFGCR0_ICL _MMIO(0x164280)#define DPCLKA_CFGCR0_DDI_CLK_OFF (port) (1 << ((port) == PORT_F ? 23 : \ (port) + 10)) +#define ICL_DPCLKA_CFGCR0_DDI_CLK_OFF (port) (1 << ((port) + 10)) +#define ICL_DPCLKA_CFGCR0_TC_CLK_OFF (tc_port) (1 << ((tc_port) == PORT_TC4 ? \ + 21 : (tc_port) + 12))#define DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT (port) ((port) == PORT_F ? 21 : \ (port) * 2)#define DPCLKA_CFGCR0_DDI_CLK_SEL_MASK (port) (3 << DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port))
drivers/gpu/drm/i915/intel_ddi.c +18 -3
@@ -2733,6 +2733,21 @@ uint32_t ddi_signal_levels(struct intel_dp *intel_dp)return DDI_BUF_TRANS_SELECT (level); } +static inline +uint32_t icl_dpclka_cfgcr0_clk_off (struct drm_i915_private *dev_priv, +enum port port) +{ +if (intel_port_is_combophy (dev_priv, port)) { +return ICL_DPCLKA_CFGCR0_DDI_CLK_OFF (port); + }else if (intel_port_is_tc (dev_priv, port)) { +enum tc_port tc_port =intel_port_to_tc (dev_priv, port); + +return ICL_DPCLKA_CFGCR0_TC_CLK_OFF (tc_port); + } + +return 0 ; +} +void icl_map_plls_to_ports (struct drm_crtc *crtc,struct intel_crtc_state *crtc_state,struct drm_atomic_state *old_state)
@@ -2756,7 +2771,7 @@ void icl_map_plls_to_ports(struct drm_crtc *crtc,mutex_lock (&dev_priv->dpll_lock); val =I915_READ (DPCLKA_CFGCR0_ICL ); -WARN_ON ((val &DPCLKA_CFGCR0_DDI_CLK_OFF (port)) ==0 ); +WARN_ON ((val &icl_dpclka_cfgcr0_clk_off (dev_priv, port)) ==0 );if (intel_port_is_combophy (dev_priv, port)) { val &= ~DPCLKA_CFGCR0_DDI_CLK_SEL_MASK (port);
@@ -2765,7 +2780,7 @@ void icl_map_plls_to_ports(struct drm_crtc *crtc,POSTING_READ (DPCLKA_CFGCR0_ICL ); } - val &= ~DPCLKA_CFGCR0_DDI_CLK_OFF (port); + val &= ~icl_dpclka_cfgcr0_clk_off (dev_priv, port);I915_WRITE (DPCLKA_CFGCR0_ICL , val);mutex_unlock (&dev_priv->dpll_lock);
@@ -2793,7 +2808,7 @@ void icl_unmap_plls_to_ports(struct drm_crtc *crtc,mutex_lock (&dev_priv->dpll_lock);I915_WRITE (DPCLKA_CFGCR0_ICL ,I915_READ (DPCLKA_CFGCR0_ICL ) | -DPCLKA_CFGCR0_DDI_CLK_OFF (port)); +icl_dpclka_cfgcr0_clk_off (dev_priv, port));mutex_unlock (&dev_priv->dpll_lock); } }
Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 8/8] drm/i915/icl: Fix DDI/TC port clk_off bits
Quoted 7 lines · Mahesh Kumar
DDI/TC clock-off bits are not equally distanced. TC1-3 bits are from offset 12 & TC4 is at offset 21.
Create a function to choose correct clk-off bit.Signed-off-by Mahesh Kumar <[email protected]>Signed-off-by Vandita Kulkarni <[email protected]>Cc Lucas De Marchi <[email protected]>
Missing Fixes tag.
Lucas De Marchi
Quoted 79 lines
--- drivers/gpu/drm/i915/i915_reg.h | 3 +++ drivers/gpu/drm/i915/intel_ddi.c | 21 ++++++++++++++++++--- 2 files changed, 21 insertions(+), 3 deletions(-)drivers/gpu/drm/i915/i915_reg.h +3
-0@@ -9302,6 +9302,9 @@ enum skl_power_gate {#define DPCLKA_CFGCR0_ICL _MMIO(0x164280)#define DPCLKA_CFGCR0_DDI_CLK_OFF (port) (1 << ((port) == PORT_F ? 23 : \ (port) + 10)) +#define ICL_DPCLKA_CFGCR0_DDI_CLK_OFF (port) (1 << ((port) + 10)) +#define ICL_DPCLKA_CFGCR0_TC_CLK_OFF (tc_port) (1 << ((tc_port) == PORT_TC4 ? \ + 21 : (tc_port) + 12))#define DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT (port) ((port) == PORT_F ? 21 : \ (port) * 2)#define DPCLKA_CFGCR0_DDI_CLK_SEL_MASK (port) (3 << DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port))drivers/gpu/drm/i915/intel_ddi.c +18
-3@@ -2733,6 +2733,21 @@ uint32_t ddi_signal_levels(struct intel_dp *intel_dp)return DDI_BUF_TRANS_SELECT (level); } +static inline +uint32_t icl_dpclka_cfgcr0_clk_off (struct drm_i915_private *dev_priv, +enum port port) +{ +if (intel_port_is_combophy (dev_priv, port)) { +return ICL_DPCLKA_CFGCR0_DDI_CLK_OFF (port); + }else if (intel_port_is_tc (dev_priv, port)) { +enum tc_port tc_port =intel_port_to_tc (dev_priv, port); + +return ICL_DPCLKA_CFGCR0_TC_CLK_OFF (tc_port); + } + +return 0 ; +} +void icl_map_plls_to_ports (struct drm_crtc *crtc,struct intel_crtc_state *crtc_state,struct drm_atomic_state *old_state)@@ -2756,7 +2771,7 @@ void icl_map_plls_to_ports(struct drm_crtc *crtc,mutex_lock (&dev_priv->dpll_lock); val =I915_READ (DPCLKA_CFGCR0_ICL ); -WARN_ON ((val &DPCLKA_CFGCR0_DDI_CLK_OFF (port)) ==0 ); +WARN_ON ((val &icl_dpclka_cfgcr0_clk_off (dev_priv, port)) ==0 );if (intel_port_is_combophy (dev_priv, port)) { val &= ~DPCLKA_CFGCR0_DDI_CLK_SEL_MASK (port);@@ -2765,7 +2780,7 @@ void icl_map_plls_to_ports(struct drm_crtc *crtc,POSTING_READ (DPCLKA_CFGCR0_ICL ); } - val &= ~DPCLKA_CFGCR0_DDI_CLK_OFF (port); + val &= ~icl_dpclka_cfgcr0_clk_off (dev_priv, port);I915_WRITE (DPCLKA_CFGCR0_ICL , val);mutex_unlock (&dev_priv->dpll_lock);@@ -2793,7 +2808,7 @@ void icl_unmap_plls_to_ports(struct drm_crtc *crtc,mutex_lock (&dev_priv->dpll_lock);I915_WRITE (DPCLKA_CFGCR0_ICL ,I915_READ (DPCLKA_CFGCR0_ICL ) | -DPCLKA_CFGCR0_DDI_CLK_OFF (port)); +icl_dpclka_cfgcr0_clk_off (dev_priv, port));mutex_unlock (&dev_priv->dpll_lock); } }Signature · 6 lines
2.16.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 1/1 drm/i915/icl: Fix DDI/TC port clk_off bits
From: Mahesh Kumar <[email protected]>
DDI/TC clock-off bits are not equally distanced. TC1-3 bits are from offset 12 & TC4 is at offset 21.
Create a function to choose correct clk-off bit.
v2: Add fixes tag (Lucas)
--- drivers/gpu/drm/i915/i915_reg.h | 3 +++ drivers/gpu/drm/i915/intel_ddi.c | 21 ++++++++++++++++++--- 2 files changed, 21 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -9310,6 +9310,9 @@ enum skl_power_gate {#define DPCLKA_CFGCR0_ICL _MMIO(0x164280)#define DPCLKA_CFGCR0_DDI_CLK_OFF (port) (1 << ((port) == PORT_F ? 23 : \ (port) + 10)) +#define ICL_DPCLKA_CFGCR0_DDI_CLK_OFF (port) (1 << ((port) + 10)) +#define ICL_DPCLKA_CFGCR0_TC_CLK_OFF (tc_port) (1 << ((tc_port) == PORT_TC4 ? \ + 21 : (tc_port) + 12))#define DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT (port) ((port) == PORT_F ? 21 : \ (port) * 2)#define DPCLKA_CFGCR0_DDI_CLK_SEL_MASK (port) (3 << DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port))
drivers/gpu/drm/i915/intel_ddi.c +18 -3
@@ -2740,6 +2740,21 @@ uint32_t ddi_signal_levels(struct intel_dp *intel_dp)return DDI_BUF_TRANS_SELECT (level); } +static inline +uint32_t icl_dpclka_cfgcr0_clk_off (struct drm_i915_private *dev_priv, +enum port port) +{ +if (intel_port_is_combophy (dev_priv, port)) { +return ICL_DPCLKA_CFGCR0_DDI_CLK_OFF (port); + }else if (intel_port_is_tc (dev_priv, port)) { +enum tc_port tc_port =intel_port_to_tc (dev_priv, port); + +return ICL_DPCLKA_CFGCR0_TC_CLK_OFF (tc_port); + } + +return 0 ; +} +void icl_map_plls_to_ports (struct drm_crtc *crtc,struct intel_crtc_state *crtc_state,struct drm_atomic_state *old_state)
@@ -2763,7 +2778,7 @@ void icl_map_plls_to_ports(struct drm_crtc *crtc,mutex_lock (&dev_priv->dpll_lock); val =I915_READ (DPCLKA_CFGCR0_ICL ); -WARN_ON ((val &DPCLKA_CFGCR0_DDI_CLK_OFF (port)) ==0 ); +WARN_ON ((val &icl_dpclka_cfgcr0_clk_off (dev_priv, port)) ==0 );if (intel_port_is_combophy (dev_priv, port)) { val &= ~DPCLKA_CFGCR0_DDI_CLK_SEL_MASK (port);
@@ -2772,7 +2787,7 @@ void icl_map_plls_to_ports(struct drm_crtc *crtc,POSTING_READ (DPCLKA_CFGCR0_ICL ); } - val &= ~DPCLKA_CFGCR0_DDI_CLK_OFF (port); + val &= ~icl_dpclka_cfgcr0_clk_off (dev_priv, port);I915_WRITE (DPCLKA_CFGCR0_ICL , val);mutex_unlock (&dev_priv->dpll_lock);
@@ -2800,7 +2815,7 @@ void icl_unmap_plls_to_ports(struct drm_crtc *crtc,mutex_lock (&dev_priv->dpll_lock);I915_WRITE (DPCLKA_CFGCR0_ICL ,I915_READ (DPCLKA_CFGCR0_ICL ) | -DPCLKA_CFGCR0_DDI_CLK_OFF (port)); +icl_dpclka_cfgcr0_clk_off (dev_priv, port));mutex_unlock (&dev_priv->dpll_lock); } }
Signature · 6 lines
2.19.1.1.g8c3cf03f71 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for Refactor and Add helper function for combophy/tc ports
In reply to Mahesh Kumar== Series Details ==
== Series Details ==
Series: Refactor and Add helper function for combophy/tc ports
URL : https://patchwork.freedesktop.org/series/50484/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip 4591313167c8 drm/i915/icl: create function to identify combophy port b95d617455a9 drm/i915/icl: use combophy/TC helper functions during display detection 4e37b5e76bdf drm/i915/icl: Refactor get_ddi_pll using helper func ba3df9087f61 drm/i915/icl: Use helper functions to classify the ports d0c90e3f03a0 drm/i915/icl: Refactor icl pll functions be5ebfc35a53 drm/i915/icl: Combine all port/combophy macros at one place 4b77c0de33ec drm/i915/icl: Introduce new macros to get combophy registers bc98520b291a drm/i915/icl: Fix DDI/TC port clk_off bits -:23: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'tc_port' - possible side-effects? #23: FILE: drivers/gpu/drm/i915/i915_reg.h:9308: +#define ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port) (1 << ((tc_port) == PORT_TC4 ? \ + 21 : (tc_port) + 12))
total: 0 errors, 0 warnings, 1 checks, 54 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for Refactor and Add helper function for combophy/tc ports
In reply to Mahesh Kumar== Series Details ==
== Series Details ==
Series: Refactor and Add helper function for combophy/tc ports
URL : https://patchwork.freedesktop.org/series/50484/
State : failure
== Summary ==
= CI Bug Log - changes from CI_DRM_4917 -> Patchwork_10334 =
== Summary - FAILURE ==
Serious unknown changes coming with Patchwork_10334 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_10334, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/50484/revisions/1/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_10334:
=== IGT changes ===
==== Possible regressions ====
igt@drv_selftest@live_hangcheck:
fi-icl-u: PASS -> INCOMPLETE
==== Warnings ====
igt@drv_selftest@live_guc:
fi-icl-u: PASS -> SKIP +1== Known issues ==
Here are the changes found in Patchwork_10334 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@amdgpu/amd_basic@cs-compute:
fi-kbl-8809g: NOTRUN -> FAIL (fdo#108094)
igt@amdgpu/amd_prime@amd-to-i915:
fi-kbl-8809g: NOTRUN -> FAIL (fdo#107341)
igt@gem_exec_suspend@basic-s4-devices:
fi-blb-e6850: PASS -> INCOMPLETE (fdo#107718)
igt@kms_pipe_crc_basic@nonblocking-crc-pipe-b-frame-sequence:
fi-byt-clapper: PASS -> FAIL (fdo#107362, fdo#103191)
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-cfl-8109u: NOTRUN -> INCOMPLETE (fdo#108126, fdo#106070)
==== Possible fixes ====
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
fi-cfl-8109u: INCOMPLETE (fdo#108126, fdo#106070) -> PASS fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#106070 https://bugs.freedesktop.org/show_bug.cgi?id=106070
fdo#107341 https://bugs.freedesktop.org/show_bug.cgi?id=107341
fdo#107362 https://bugs.freedesktop.org/show_bug.cgi?id=107362
fdo#107718 https://bugs.freedesktop.org/show_bug.cgi?id=107718
fdo#108094 https://bugs.freedesktop.org/show_bug.cgi?id=108094
fdo#108126 https://bugs.freedesktop.org/show_bug.cgi?id=108126
== Participating hosts (47 -> 44) ==
Additional (1): fi-snb-2520m
Missing (4): fi-bsw-cyan fi-byt-squawks fi-icl-u2 fi-hsw-4200u
== Build changes ==
* Linux: CI_DRM_4917 -> Patchwork_10334
CI_DRM_4917: 7483d033ff9da99c977541021d91940973c94ead @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4662: ebf6a1dd1795e2f014ff3c47fe2eb4d5255845bd @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10334: bc98520b291a477a94a5718fc4c6ef780910cdf8 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
bc98520b291a drm/i915/icl: Fix DDI/TC port clk_off bits4b77c0de33ec drm/i915/icl: Introduce new macros to get combophy registers be5ebfc35a53 drm/i915/icl: Combine all port/combophy macros at one place d0c90e3f03a0 drm/i915/icl: Refactor icl pll functionsba3df9087f61 drm/i915/icl: Use helper functions to classify the ports 4e37b5e76bdf drm/i915/icl: Refactor get_ddi_pll using helper func b95d617455a9 drm/i915/icl: use combophy/TC helper functions during display detection 4591313167c8 drm/i915/icl: create function to identify combophy port
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10334/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for Refactor and Add helper function for combophy/tc ports
In reply to Mahesh Kumar== Series Details ==
== Series Details ==
Series: Refactor and Add helper function for combophy/tc ports
URL : https://patchwork.freedesktop.org/series/50484/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4919 -> Patchwork_10341 =
== Summary - WARNING ==
Minor unknown changes coming with Patchwork_10341 need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_10341, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/50484/revisions/1/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_10341:
=== IGT changes ===
==== Warnings ====
igt@pm_rpm@module-reload:
fi-hsw-4770r: PASS -> SKIP== Known issues ==
Here are the changes found in Patchwork_10341 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@amdgpu/amd_basic@cs-compute:
fi-kbl-8809g: NOTRUN -> FAIL (fdo#108094)
igt@amdgpu/amd_prime@amd-to-i915:
fi-kbl-8809g: NOTRUN -> FAIL (fdo#107341)
igt@drv_module_reload@basic-reload:
fi-glk-j4005: NOTRUN -> DMESG-WARN (fdo#106248, fdo#106725)
igt@drv_module_reload@basic-reload-inject:
fi-hsw-4770r: PASS -> DMESG-WARN (fdo#107425, fdo#107924)
igt@gem_exec_suspend@basic-s3:
fi-bdw-samus: PASS -> INCOMPLETE (fdo#107773)
igt@kms_flip@basic-flip-vs-dpms:
fi-glk-j4005: NOTRUN -> DMESG-WARN (fdo#106000)
igt@kms_flip@basic-flip-vs-wf_vblank:
fi-glk-j4005: NOTRUN -> FAIL (fdo#100368)
igt@kms_flip@basic-plain-flip:
fi-glk-j4005: NOTRUN -> DMESG-WARN (fdo#106097)
igt@kms_frontbuffer_tracking@basic:
fi-byt-clapper: NOTRUN -> FAIL (fdo#103167)
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
fi-byt-clapper: NOTRUN -> FAIL (fdo#103191, fdo#107362)
igt@pm_rpm@module-reload:
fi-glk-j4005: NOTRUN -> DMESG-WARN (fdo#107726)
==== Possible fixes ====
igt@gem_exec_suspend@basic-s3:
fi-byt-clapper: INCOMPLETE (fdo#102657) -> PASS
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-icl-u: INCOMPLETE (fdo#107713) -> PASS fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#102657 https://bugs.freedesktop.org/show_bug.cgi?id=102657
fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#106000 https://bugs.freedesktop.org/show_bug.cgi?id=106000
fdo#106097 https://bugs.freedesktop.org/show_bug.cgi?id=106097
fdo#106248 https://bugs.freedesktop.org/show_bug.cgi?id=106248
fdo#106725 https://bugs.freedesktop.org/show_bug.cgi?id=106725
fdo#107341 https://bugs.freedesktop.org/show_bug.cgi?id=107341
fdo#107362 https://bugs.freedesktop.org/show_bug.cgi?id=107362
fdo#107425 https://bugs.freedesktop.org/show_bug.cgi?id=107425
fdo#107713 https://bugs.freedesktop.org/show_bug.cgi?id=107713
fdo#107726 https://bugs.freedesktop.org/show_bug.cgi?id=107726
fdo#107773 https://bugs.freedesktop.org/show_bug.cgi?id=107773
fdo#107924 https://bugs.freedesktop.org/show_bug.cgi?id=107924
fdo#108094 https://bugs.freedesktop.org/show_bug.cgi?id=108094
== Participating hosts (49 -> 45) ==
Additional (1): fi-glk-j4005
Missing (5): fi-ctg-p8600 fi-bsw-cyan fi-byt-squawks fi-icl-u2 fi-hsw-4200u
== Build changes ==
* Linux: CI_DRM_4919 -> Patchwork_10341
CI_DRM_4919: e489eb0296673790264b25266ef45aae7d1ab566 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4665: 267870165d9ef66b4ab423e4efe7bacba023d75e @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10341: f57caa7775e7b812ebab31aba3d1608bea229222 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
f57caa7775e7 drm/i915/icl: Fix DDI/TC port clk_off bits4eca1f772c36 drm/i915/icl: Introduce new macros to get combophy registers 7b2d6f208091 drm/i915/icl: Combine all port/combophy macros at one place c62ea17882cf drm/i915/icl: Refactor icl pll functionsae94362d7d98 drm/i915/icl: Use helper functions to classify the ports ff20ff437676 drm/i915/icl: Refactor get_ddi_pll using helper func 576a046de6ca drm/i915/icl: use combophy/TC helper functions during display detection a9fc7d4482e1 drm/i915/icl: create function to identify combophy port
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10341/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for Refactor and Add helper function for combophy/tc ports
In reply to Mahesh Kumar== Series Details ==
== Series Details ==
Series: Refactor and Add helper function for combophy/tc ports
URL : https://patchwork.freedesktop.org/series/50484/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4919_full -> Patchwork_10341_full =
== Summary - SUCCESS ==
No regressions found.
== Known issues ==
Here are the changes found in Patchwork_10341_full that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@gem_ppgtt@blt-vs-render-ctxn:
shard-apl: PASS -> INCOMPLETE (fdo#103927)
igt@kms_busy@extended-pageflip-modeset-hang-oldfb-render-a:
shard-skl: NOTRUN -> DMESG-WARN (fdo#107956)
igt@kms_cursor_crc@cursor-128x128-random:
shard-apl: PASS -> FAIL (fdo#103232) +5
igt@kms_cursor_crc@cursor-256x85-onscreen:
shard-glk: PASS -> FAIL (fdo#103232) +2
igt@kms_cursor_crc@cursor-64x64-suspend:
shard-apl: PASS -> FAIL (fdo#103232, fdo#103191)
igt@kms_cursor_legacy@cursora-vs-flipa-toggle:
shard-glk: PASS -> DMESG-WARN (fdo#105763, fdo#106538)
igt@kms_flip@flip-vs-expired-vblank-interruptible:
shard-snb: PASS -> FAIL (fdo#105363)
igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
shard-glk: PASS -> FAIL (fdo#103167) +2
{igt@kms_plane_alpha_blend@pipe-a-constant-alpha-max}:
shard-skl: NOTRUN -> FAIL (fdo#108145)
{igt@kms_plane_alpha_blend@pipe-c-constant-alpha-max}:
shard-glk: PASS -> FAIL (fdo#108145)
igt@kms_plane_multiple@atomic-pipe-a-tiling-x:
shard-apl: PASS -> FAIL (fdo#103166) +1
igt@kms_plane_multiple@atomic-pipe-b-tiling-y:
shard-glk: PASS -> FAIL (fdo#103166)
==== Possible fixes ====
igt@kms_busy@extended-pageflip-hang-newfb-render-c:
shard-glk: DMESG-WARN (fdo#107956) -> PASS
igt@kms_cursor_crc@cursor-128x42-random:
shard-skl: FAIL (fdo#103232) -> PASS
igt@kms_cursor_crc@cursor-64x21-random:
shard-apl: FAIL (fdo#103232) -> PASS
igt@kms_draw_crc@draw-method-xrgb2101010-blt-untiled:
shard-skl: FAIL (fdo#103184) -> PASS +1
igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-shrfb-draw-mmap-gtt:
shard-skl: FAIL (fdo#103167) -> PASS +5
igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-indfb-draw-mmap-wc:
shard-skl: FAIL (fdo#105682) -> PASS
igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-wc:
shard-apl: FAIL (fdo#103167) -> PASS
igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-onoff:
shard-glk: FAIL (fdo#103167) -> PASS +3
{igt@kms_plane_alpha_blend@pipe-a-coverage-7efc}:
shard-skl: FAIL (fdo#108145) -> PASS
{igt@kms_plane_alpha_blend@pipe-c-constant-alpha-max}:
shard-apl: FAIL (fdo#108145) -> PASS
igt@kms_plane_multiple@atomic-pipe-a-tiling-y:
shard-glk: FAIL (fdo#103166) -> PASS +1
igt@kms_universal_plane@universal-plane-pipe-b-functional:
shard-apl: FAIL (fdo#103166) -> PASS +1
==== Warnings ====
{igt@kms_plane_alpha_blend@pipe-a-alpha-basic}:
shard-glk: FAIL (fdo#108145) -> INCOMPLETE (fdo#103359, k.org#198133) {name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
fdo#103166 https://bugs.freedesktop.org/show_bug.cgi?id=103166
fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#103184 https://bugs.freedesktop.org/show_bug.cgi?id=103184
fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#103232 https://bugs.freedesktop.org/show_bug.cgi?id=103232
fdo#103359 https://bugs.freedesktop.org/show_bug.cgi?id=103359
fdo#103927 https://bugs.freedesktop.org/show_bug.cgi?id=103927
fdo#105363 https://bugs.freedesktop.org/show_bug.cgi?id=105363
fdo#105682 https://bugs.freedesktop.org/show_bug.cgi?id=105682
fdo#105763 https://bugs.freedesktop.org/show_bug.cgi?id=105763
fdo#106538 https://bugs.freedesktop.org/show_bug.cgi?id=106538
fdo#107956 https://bugs.freedesktop.org/show_bug.cgi?id=107956
fdo#108145 https://bugs.freedesktop.org/show_bug.cgi?id=108145
k.org#198133 https://bugzilla.kernel.org/show_bug.cgi?id=198133
== Participating hosts (6 -> 6) ==
No changes in participating hosts
== Build changes ==
* Linux: CI_DRM_4919 -> Patchwork_10341
CI_DRM_4919: e489eb0296673790264b25266ef45aae7d1ab566 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4665: 267870165d9ef66b4ab423e4efe7bacba023d75e @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10341: f57caa7775e7b812ebab31aba3d1608bea229222 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10341/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for Refactor and Add helper function for combophy/tc ports (rev2)
In reply to Mahesh Kumar== Series Details ==
== Series Details ==
Series: Refactor and Add helper function for combophy/tc ports (rev2)
URL : https://patchwork.freedesktop.org/series/50484/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip 32f5e0dd8f7e drm/i915/icl: create function to identify combophy port 5d2333571a63 drm/i915/icl: use combophy/TC helper functions during display detection 05b02648ec23 drm/i915/icl: Refactor get_ddi_pll using helper func b1af249bee9d drm/i915/icl: Use helper functions to classify the ports 34829cbb0f1a drm/i915/icl: Refactor icl pll functions 9ea16758bce8 drm/i915/icl: Combine all port/combophy macros at one place 49a53243c2c8 drm/i915/icl: Introduce new macros to get combophy registers 863f6eea7f50 drm/i915/icl: Fix DDI/TC port clk_off bits -:23: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'tc_port' - possible side-effects? #23: FILE: drivers/gpu/drm/i915/i915_reg.h:9308: +#define ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port) (1 << ((tc_port) == PORT_TC4 ? \ + 21 : (tc_port) + 12))
total: 0 errors, 0 warnings, 1 checks, 54 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for Refactor and Add helper function for combophy/tc ports (rev2)
In reply to Mahesh Kumar== Series Details ==
== Series Details ==
Series: Refactor and Add helper function for combophy/tc ports (rev2)
URL : https://patchwork.freedesktop.org/series/50484/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4930 -> Patchwork_10355 =
== Summary - WARNING ==
Minor unknown changes coming with Patchwork_10355 need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_10355, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/50484/revisions/2/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_10355:
=== IGT changes ===
==== Warnings ====
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
fi-glk-j4005: PASS -> SKIP
igt@prime_vgem@basic-fence-flip:
fi-ivb-3520m: PASS -> SKIP== Known issues ==
Here are the changes found in Patchwork_10355 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@drv_module_reload@basic-reload-inject:
fi-glk-j4005: PASS -> DMESG-WARN (fdo#106238) +1
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-byt-clapper: PASS -> FAIL (fdo#103191, fdo#107362)
igt@pm_rpm@basic-rte:
fi-glk-j4005: PASS -> DMESG-WARN (fdo#106097)
==== Possible fixes ====
igt@drv_getparams_basic@basic-subslice-total:
fi-snb-2520m: DMESG-WARN (fdo#103713) -> PASS +10
igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a:
fi-glk-j4005: DMESG-WARN (fdo#106238) -> PASS
igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a-frame-sequence:
fi-byt-clapper: FAIL (fdo#103191, fdo#107362) -> PASS
igt@pm_rpm@basic-pci-d3-state:
fi-glk-dsi: INCOMPLETE (k.org#198133, fdo#103359) -> PASS
==== Warnings ====
igt@pm_rpm@module-reload:
fi-glk-j4005: DMESG-WARN (fdo#107726) -> DMESG-FAIL (fdo#104767) fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#103359 https://bugs.freedesktop.org/show_bug.cgi?id=103359
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#104767 https://bugs.freedesktop.org/show_bug.cgi?id=104767
fdo#106097 https://bugs.freedesktop.org/show_bug.cgi?id=106097
fdo#106238 https://bugs.freedesktop.org/show_bug.cgi?id=106238
fdo#107362 https://bugs.freedesktop.org/show_bug.cgi?id=107362
fdo#107726 https://bugs.freedesktop.org/show_bug.cgi?id=107726
k.org#198133 https://bugzilla.kernel.org/show_bug.cgi?id=198133
== Participating hosts (45 -> 43) ==
Additional (1): fi-hsw-4770
Missing (3): fi-bsw-cyan fi-byt-squawks fi-icl-u2
== Build changes ==
* Linux: CI_DRM_4930 -> Patchwork_10355
CI_DRM_4930: bf1bd5e86f267d58ac68c342fcfff70e8ef1fd34 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4666: bba38422e7f903094562f1b78cc3579683c0a667 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10355: 863f6eea7f50bad2dd813ad349778ffdaacdf06f @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
863f6eea7f50 drm/i915/icl: Fix DDI/TC port clk_off bits49a53243c2c8 drm/i915/icl: Introduce new macros to get combophy registers 9ea16758bce8 drm/i915/icl: Combine all port/combophy macros at one place 34829cbb0f1a drm/i915/icl: Refactor icl pll functionsb1af249bee9d drm/i915/icl: Use helper functions to classify the ports 05b02648ec23 drm/i915/icl: Refactor get_ddi_pll using helper func 5d2333571a63 drm/i915/icl: use combophy/TC helper functions during display detection 32f5e0dd8f7e drm/i915/icl: create function to identify combophy port
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10355/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for Refactor and Add helper function for combophy/tc ports (rev2)
In reply to Mahesh Kumar== Series Details ==
== Series Details ==
Series: Refactor and Add helper function for combophy/tc ports (rev2)
URL : https://patchwork.freedesktop.org/series/50484/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4930 -> Patchwork_10356 =
== Summary - WARNING ==
Minor unknown changes coming with Patchwork_10356 need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_10356, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/50484/revisions/2/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_10356:
=== IGT changes ===
==== Warnings ====
igt@prime_vgem@basic-fence-flip:
fi-ivb-3520m: PASS -> SKIP== Known issues ==
Here are the changes found in Patchwork_10356 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@drv_module_reload@basic-reload:
fi-glk-j4005: PASS -> DMESG-WARN (fdo#106248, fdo#106725)
igt@gem_exec_suspend@basic-s4-devices:
fi-bdw-samus: PASS -> INCOMPLETE (fdo#107773)
igt@kms_flip@basic-flip-vs-modeset:
fi-glk-j4005: PASS -> DMESG-WARN (fdo#106000)
igt@kms_frontbuffer_tracking@basic:
fi-byt-clapper: PASS -> FAIL (fdo#103167)
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-blb-e6850: NOTRUN -> INCOMPLETE (fdo#107718)
==== Possible fixes ====
igt@drv_getparams_basic@basic-subslice-total:
fi-snb-2520m: DMESG-WARN (fdo#103713) -> PASS +10
igt@gem_exec_suspend@basic-s4-devices:
fi-blb-e6850: INCOMPLETE (fdo#107718) -> PASS
igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a:
fi-glk-j4005: DMESG-WARN (fdo#106238) -> PASS
igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a-frame-sequence:
fi-byt-clapper: FAIL (fdo#103191, fdo#107362) -> PASS
igt@pm_rpm@basic-pci-d3-state:
fi-glk-dsi: INCOMPLETE (k.org#198133, fdo#103359) -> PASS fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#103359 https://bugs.freedesktop.org/show_bug.cgi?id=103359
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#106000 https://bugs.freedesktop.org/show_bug.cgi?id=106000
fdo#106238 https://bugs.freedesktop.org/show_bug.cgi?id=106238
fdo#106248 https://bugs.freedesktop.org/show_bug.cgi?id=106248
fdo#106725 https://bugs.freedesktop.org/show_bug.cgi?id=106725
fdo#107362 https://bugs.freedesktop.org/show_bug.cgi?id=107362
fdo#107718 https://bugs.freedesktop.org/show_bug.cgi?id=107718
fdo#107773 https://bugs.freedesktop.org/show_bug.cgi?id=107773
k.org#198133 https://bugzilla.kernel.org/show_bug.cgi?id=198133
== Participating hosts (45 -> 43) ==
Additional (1): fi-hsw-4770
Missing (3): fi-bsw-cyan fi-byt-squawks fi-icl-u2
== Build changes ==
* Linux: CI_DRM_4930 -> Patchwork_10356
CI_DRM_4930: bf1bd5e86f267d58ac68c342fcfff70e8ef1fd34 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4666: bba38422e7f903094562f1b78cc3579683c0a667 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10356: 5bcb472b25d4d5b2269d92392c4a845713fbd3ff @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
5bcb472b25d4 drm/i915/icl: Fix DDI/TC port clk_off bitsb8f7bc319f60 drm/i915/icl: Introduce new macros to get combophy registers e07bdd1ce82d drm/i915/icl: Combine all port/combophy macros at one place db90bb13e05f drm/i915/icl: Refactor icl pll functions0f2e64af0597 drm/i915/icl: Use helper functions to classify the ports 6595247dc053 drm/i915/icl: Refactor get_ddi_pll using helper func c5b949f2a561 drm/i915/icl: use combophy/TC helper functions during display detection 2583a0d7366a drm/i915/icl: create function to identify combophy port
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10356/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for Refactor and Add helper function for combophy/tc ports (rev2)
In reply to Mahesh Kumar== Series Details ==
== Series Details ==
Series: Refactor and Add helper function for combophy/tc ports (rev2)
URL : https://patchwork.freedesktop.org/series/50484/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4930_full -> Patchwork_10355_full =
== Summary - SUCCESS ==
No regressions found.
== Known issues ==
Here are the changes found in Patchwork_10355_full that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@gem_exec_schedule@pi-ringfull-blt:
shard-skl: NOTRUN -> FAIL (fdo#103158)
igt@gem_exec_schedule@pi-ringfull-bsd:
shard-glk: NOTRUN -> FAIL (fdo#103158) +3
igt@gem_pwrite_pread@uncached-pwrite-blt-gtt_mmap-performance:
shard-apl: PASS -> INCOMPLETE (fdo#103927)
igt@kms_available_modes_crc@available_mode_test_crc:
shard-glk: NOTRUN -> FAIL (fdo#106641)
igt@kms_busy@extended-modeset-hang-newfb-render-a:
shard-skl: NOTRUN -> DMESG-WARN (fdo#107956) +3
igt@kms_busy@extended-modeset-hang-newfb-render-c:
shard-glk: NOTRUN -> DMESG-WARN (fdo#107956) +11
igt@kms_cursor_crc@cursor-128x128-onscreen:
shard-skl: PASS -> FAIL (fdo#103232)
igt@kms_cursor_crc@cursor-256x256-random:
shard-apl: PASS -> FAIL (fdo#103232) +2
igt@kms_cursor_crc@cursor-256x256-suspend:
shard-skl: PASS -> INCOMPLETE (fdo#104108)
shard-apl: PASS -> FAIL (fdo#103232, fdo#103191)
igt@kms_cursor_crc@cursor-256x85-onscreen:
shard-glk: NOTRUN -> FAIL (fdo#103232) +3
igt@kms_cursor_crc@cursor-256x85-sliding:
shard-skl: NOTRUN -> FAIL (fdo#103232) +1
igt@kms_cursor_crc@cursor-64x64-suspend:
shard-skl: NOTRUN -> FAIL (fdo#103232, fdo#103191)
igt@kms_cursor_legacy@2x-long-nonblocking-modeset-vs-cursor-atomic:
shard-glk: NOTRUN -> FAIL (fdo#106509, fdo#105454)
igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic:
shard-glk: NOTRUN -> FAIL (fdo#105454)
igt@kms_draw_crc@draw-method-rgb565-pwrite-untiled:
shard-skl: PASS -> FAIL (fdo#103184)
igt@kms_fbcon_fbt@psr:
shard-skl: NOTRUN -> FAIL (fdo#107882)
igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
shard-apl: PASS -> FAIL (fdo#103167)
igt@kms_frontbuffer_tracking@fbc-2p-primscrn-spr-indfb-onoff:
shard-glk: NOTRUN -> FAIL (fdo#103167) +10
igt@kms_frontbuffer_tracking@fbc-tilingchange:
shard-skl: PASS -> FAIL (fdo#105682)
igt@kms_frontbuffer_tracking@fbcpsr-1p-offscren-pri-indfb-draw-mmap-cpu:
shard-skl: PASS -> FAIL (fdo#103167) +4
igt@kms_frontbuffer_tracking@fbcpsr-2p-primscrn-pri-shrfb-draw-pwrite:
shard-snb: SKIP -> INCOMPLETE (fdo#105411)
igt@kms_frontbuffer_tracking@fbcpsr-stridechange:
shard-skl: NOTRUN -> FAIL (fdo#105683)
igt@kms_plane@pixel-format-pipe-a-planes:
shard-skl: NOTRUN -> DMESG-WARN (fdo#106885) +1
{igt@kms_plane_alpha_blend@pipe-a-coverage-7efc}:
shard-skl: PASS -> FAIL (fdo#108145)
{igt@kms_plane_alpha_blend@pipe-b-alpha-basic}:
shard-skl: NOTRUN -> FAIL (fdo#108145) +3
{igt@kms_plane_alpha_blend@pipe-b-coverage-7efc}:
shard-skl: NOTRUN -> FAIL (fdo#108146)
{igt@kms_plane_alpha_blend@pipe-c-alpha-7efc}:
shard-glk: NOTRUN -> FAIL (fdo#108146) +1
{igt@kms_plane_alpha_blend@pipe-c-alpha-transparant-fb}:
shard-glk: NOTRUN -> FAIL (fdo#108145) +12
igt@kms_plane_multiple@atomic-pipe-a-tiling-y:
shard-glk: NOTRUN -> FAIL (fdo#103166) +3
igt@kms_rotation_crc@exhaust-fences:
shard-skl: NOTRUN -> DMESG-WARN (fdo#105748)
igt@kms_setmode@basic:
shard-glk: NOTRUN -> FAIL (fdo#99912)
shard-kbl: PASS -> FAIL (fdo#99912)
igt@pm_backlight@fade_with_suspend:
shard-skl: NOTRUN -> FAIL (fdo#107847)
igt@pm_rpm@gem-evict-pwrite:
shard-skl: PASS -> INCOMPLETE (fdo#107807)
==== Possible fixes ====
igt@kms_available_modes_crc@available_mode_test_crc:
shard-apl: FAIL (fdo#106641) -> PASS
igt@kms_flip_tiling@flip-yf-tiled:
shard-apl: DMESG-FAIL (fdo#103558, fdo#105602) -> PASS
igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-render:
shard-apl: FAIL (fdo#103167) -> PASS
igt@kms_frontbuffer_tracking@fbc-1p-rte:
shard-apl: FAIL (fdo#103167, fdo#105682) -> PASS
igt@kms_plane@plane-position-covered-pipe-a-planes:
shard-apl: FAIL (fdo#103166) -> PASS +1
igt@kms_setmode@basic:
shard-apl: FAIL (fdo#99912) -> PASS
igt@kms_vblank@pipe-c-ts-continuation-dpms-suspend:
shard-apl: DMESG-WARN (fdo#103558, fdo#105602) -> PASS +18
igt@perf@enable-disable:
shard-kbl: INCOMPLETE (fdo#103665) -> PASS
igt@perf_pmu@rc6-runtime-pm:
shard-skl: FAIL (fdo#105010) -> PASS {name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
fdo#103158 https://bugs.freedesktop.org/show_bug.cgi?id=103158
fdo#103166 https://bugs.freedesktop.org/show_bug.cgi?id=103166
fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#103184 https://bugs.freedesktop.org/show_bug.cgi?id=103184
fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#103232 https://bugs.freedesktop.org/show_bug.cgi?id=103232
fdo#103558 https://bugs.freedesktop.org/show_bug.cgi?id=103558
fdo#103665 https://bugs.freedesktop.org/show_bug.cgi?id=103665
fdo#103927 https://bugs.freedesktop.org/show_bug.cgi?id=103927
fdo#104108 https://bugs.freedesktop.org/show_bug.cgi?id=104108
fdo#105010 https://bugs.freedesktop.org/show_bug.cgi?id=105010
fdo#105411 https://bugs.freedesktop.org/show_bug.cgi?id=105411
fdo#105454 https://bugs.freedesktop.org/show_bug.cgi?id=105454
fdo#105602 https://bugs.freedesktop.org/show_bug.cgi?id=105602
fdo#105682 https://bugs.freedesktop.org/show_bug.cgi?id=105682
fdo#105683 https://bugs.freedesktop.org/show_bug.cgi?id=105683
fdo#105748 https://bugs.freedesktop.org/show_bug.cgi?id=105748
fdo#106509 https://bugs.freedesktop.org/show_bug.cgi?id=106509
fdo#106641 https://bugs.freedesktop.org/show_bug.cgi?id=106641
fdo#106885 https://bugs.freedesktop.org/show_bug.cgi?id=106885
fdo#107807 https://bugs.freedesktop.org/show_bug.cgi?id=107807
fdo#107847 https://bugs.freedesktop.org/show_bug.cgi?id=107847
fdo#107882 https://bugs.freedesktop.org/show_bug.cgi?id=107882
fdo#107956 https://bugs.freedesktop.org/show_bug.cgi?id=107956
fdo#108145 https://bugs.freedesktop.org/show_bug.cgi?id=108145
fdo#108146 https://bugs.freedesktop.org/show_bug.cgi?id=108146
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
== Participating hosts (5 -> 6) ==
Additional (1): shard-glk
== Build changes ==
* Linux: CI_DRM_4930 -> Patchwork_10355
CI_DRM_4930: bf1bd5e86f267d58ac68c342fcfff70e8ef1fd34 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4666: bba38422e7f903094562f1b78cc3579683c0a667 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10355: 863f6eea7f50bad2dd813ad349778ffdaacdf06f @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10355/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for Refactor and Add helper function for combophy/tc ports (rev2)
In reply to Mahesh Kumar== Series Details ==
== Series Details ==
Series: Refactor and Add helper function for combophy/tc ports (rev2)
URL : https://patchwork.freedesktop.org/series/50484/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4930_full -> Patchwork_10356_full =
== Summary - SUCCESS ==
No regressions found.
== Known issues ==
Here are the changes found in Patchwork_10356_full that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@gem_exec_schedule@pi-ringfull-blt:
shard-skl: NOTRUN -> FAIL (fdo#103158)
igt@gem_exec_schedule@pi-ringfull-bsd:
shard-glk: NOTRUN -> FAIL (fdo#103158) +3
igt@gem_render_copy_redux@interruptible:
shard-kbl: PASS -> INCOMPLETE (fdo#106650, fdo#103665)
igt@gem_softpin@noreloc-s3:
shard-skl: PASS -> INCOMPLETE (fdo#104108, fdo#107773)
igt@kms_available_modes_crc@available_mode_test_crc:
shard-glk: NOTRUN -> FAIL (fdo#106641)
igt@kms_busy@extended-modeset-hang-newfb-render-c:
shard-glk: NOTRUN -> DMESG-WARN (fdo#107956) +11
igt@kms_cursor_crc@cursor-128x128-onscreen:
shard-skl: PASS -> FAIL (fdo#103232)
igt@kms_cursor_crc@cursor-128x128-suspend:
shard-skl: NOTRUN -> INCOMPLETE (fdo#104108)
igt@kms_cursor_crc@cursor-256x256-random:
shard-glk: NOTRUN -> FAIL (fdo#103232) +7
igt@kms_cursor_crc@cursor-256x85-random:
shard-hsw: PASS -> DMESG-WARN (fdo#102614)
igt@kms_cursor_crc@cursor-64x21-random:
shard-apl: PASS -> FAIL (fdo#103232) +1
igt@kms_cursor_legacy@2x-long-nonblocking-modeset-vs-cursor-atomic:
shard-glk: NOTRUN -> FAIL (fdo#107409, fdo#106509)
igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic:
shard-glk: NOTRUN -> FAIL (fdo#105454, fdo#106509)
igt@kms_draw_crc@draw-method-rgb565-pwrite-untiled:
shard-skl: PASS -> FAIL (fdo#103184)
igt@kms_fbcon_fbt@psr:
shard-skl: NOTRUN -> FAIL (fdo#107882)
igt@kms_flip@2x-flip-vs-expired-vblank:
shard-glk: NOTRUN -> FAIL (fdo#105363)
igt@kms_flip@flip-vs-expired-vblank-interruptible:
shard-skl: PASS -> FAIL (fdo#105363)
igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-fullscreen:
shard-apl: PASS -> FAIL (fdo#103167)
igt@kms_frontbuffer_tracking@fbc-2p-primscrn-cur-indfb-draw-mmap-cpu:
shard-glk: NOTRUN -> FAIL (fdo#103167) +9
igt@kms_frontbuffer_tracking@fbc-tilingchange:
shard-skl: PASS -> FAIL (fdo#103167) +2
igt@kms_frontbuffer_tracking@fbcpsr-1p-offscren-pri-indfb-draw-mmap-cpu:
shard-skl: PASS -> FAIL (fdo#105682) +1
igt@kms_frontbuffer_tracking@fbcpsr-2p-primscrn-pri-shrfb-draw-pwrite:
shard-snb: SKIP -> INCOMPLETE (fdo#105411)
igt@kms_frontbuffer_tracking@fbcpsr-stridechange:
shard-skl: NOTRUN -> FAIL (fdo#105683)
igt@kms_frontbuffer_tracking@fbcpsr-suspend:
shard-skl: PASS -> INCOMPLETE (fdo#104108)
igt@kms_plane@pixel-format-pipe-a-planes:
shard-skl: NOTRUN -> DMESG-WARN (fdo#106885)
{igt@kms_plane_alpha_blend@pipe-a-alpha-basic}:
shard-skl: NOTRUN -> FAIL (fdo#108145) +1
{igt@kms_plane_alpha_blend@pipe-a-coverage-7efc}:
shard-skl: PASS -> FAIL (fdo#108145)
{igt@kms_plane_alpha_blend@pipe-b-coverage-7efc}:
shard-skl: NOTRUN -> FAIL (fdo#108146)
{igt@kms_plane_alpha_blend@pipe-c-alpha-7efc}:
shard-glk: NOTRUN -> FAIL (fdo#108146) +1
{igt@kms_plane_alpha_blend@pipe-c-alpha-transparant-fb}:
shard-glk: NOTRUN -> FAIL (fdo#108145) +13
igt@kms_plane_multiple@atomic-pipe-a-tiling-y:
shard-glk: NOTRUN -> FAIL (fdo#103166) +2
igt@kms_setmode@basic:
shard-glk: NOTRUN -> FAIL (fdo#99912)
shard-kbl: PASS -> FAIL (fdo#99912)
igt@pm_backlight@fade_with_suspend:
shard-skl: NOTRUN -> FAIL (fdo#107847)
==== Possible fixes ====
igt@kms_available_modes_crc@available_mode_test_crc:
shard-apl: FAIL (fdo#106641) -> PASS
igt@kms_flip_tiling@flip-yf-tiled:
shard-apl: DMESG-FAIL (fdo#105602, fdo#103558) -> PASS
igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-move:
shard-apl: FAIL (fdo#103167) -> PASS
igt@kms_frontbuffer_tracking@fbc-1p-rte:
shard-apl: FAIL (fdo#103167, fdo#105682) -> PASS
igt@kms_plane_multiple@atomic-pipe-b-tiling-yf:
shard-apl: FAIL (fdo#103166) -> PASS
igt@kms_vblank@pipe-c-ts-continuation-dpms-suspend:
shard-apl: DMESG-WARN (fdo#105602, fdo#103558) -> PASS +18
igt@perf@enable-disable:
shard-kbl: INCOMPLETE (fdo#103665) -> PASS {name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
fdo#102614 https://bugs.freedesktop.org/show_bug.cgi?id=102614
fdo#103158 https://bugs.freedesktop.org/show_bug.cgi?id=103158
fdo#103166 https://bugs.freedesktop.org/show_bug.cgi?id=103166
fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#103184 https://bugs.freedesktop.org/show_bug.cgi?id=103184
fdo#103232 https://bugs.freedesktop.org/show_bug.cgi?id=103232
fdo#103558 https://bugs.freedesktop.org/show_bug.cgi?id=103558
fdo#103665 https://bugs.freedesktop.org/show_bug.cgi?id=103665
fdo#104108 https://bugs.freedesktop.org/show_bug.cgi?id=104108
fdo#105363 https://bugs.freedesktop.org/show_bug.cgi?id=105363
fdo#105411 https://bugs.freedesktop.org/show_bug.cgi?id=105411
fdo#105454 https://bugs.freedesktop.org/show_bug.cgi?id=105454
fdo#105602 https://bugs.freedesktop.org/show_bug.cgi?id=105602
fdo#105682 https://bugs.freedesktop.org/show_bug.cgi?id=105682
fdo#105683 https://bugs.freedesktop.org/show_bug.cgi?id=105683
fdo#106509 https://bugs.freedesktop.org/show_bug.cgi?id=106509
fdo#106641 https://bugs.freedesktop.org/show_bug.cgi?id=106641
fdo#106650 https://bugs.freedesktop.org/show_bug.cgi?id=106650
fdo#106885 https://bugs.freedesktop.org/show_bug.cgi?id=106885
fdo#107409 https://bugs.freedesktop.org/show_bug.cgi?id=107409
fdo#107773 https://bugs.freedesktop.org/show_bug.cgi?id=107773
fdo#107847 https://bugs.freedesktop.org/show_bug.cgi?id=107847
fdo#107882 https://bugs.freedesktop.org/show_bug.cgi?id=107882
fdo#107956 https://bugs.freedesktop.org/show_bug.cgi?id=107956
fdo#108145 https://bugs.freedesktop.org/show_bug.cgi?id=108145
fdo#108146 https://bugs.freedesktop.org/show_bug.cgi?id=108146
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
== Participating hosts (5 -> 6) ==
Additional (1): shard-glk
== Build changes ==
* Linux: CI_DRM_4930 -> Patchwork_10356
CI_DRM_4930: bf1bd5e86f267d58ac68c342fcfff70e8ef1fd34 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4666: bba38422e7f903094562f1b78cc3579683c0a667 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10356: 5bcb472b25d4d5b2269d92392c4a845713fbd3ff @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10356/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for Refactor and Add helper function for combophy/tc ports (rev3)
In reply to Mahesh Kumar== Series Details ==
== Series Details ==
Series: Refactor and Add helper function for combophy/tc ports (rev3)
URL : https://patchwork.freedesktop.org/series/50484/
State : failure
== Summary ==
Applying: drm/i915/icl: create function to identify combophy port Using index info to reconstruct a base tree...
M drivers/gpu/drm/i915/intel_ddi.c
M drivers/gpu/drm/i915/intel_display.c
M drivers/gpu/drm/i915/intel_drv.h
Falling back to patching base and 3-way merge...
Auto-merging drivers/gpu/drm/i915/intel_drv.h
Auto-merging drivers/gpu/drm/i915/intel_display.c
Auto-merging drivers/gpu/drm/i915/intel_ddi.c
Applying: drm/i915/icl: use combophy/TC helper functions during display detection
Applying: drm/i915/icl: Refactor get_ddi_pll using helper func
Applying: drm/i915/icl: Use helper functions to classify the ports
Applying: drm/i915/icl: Refactor icl pll functions
Applying: drm/i915/icl: Combine all port/combophy macros at one place
Applying: drm/i915/icl: Introduce new macros to get combophy registers Using index info to reconstruct a base tree...
M drivers/gpu/drm/i915/i915_reg.h
Falling back to patching base and 3-way merge...
Auto-merging drivers/gpu/drm/i915/i915_reg.h
CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/i915_reg.h
error: Failed to merge in the changes.
Patch failed at 0007 drm/i915/icl: Introduce new macros to get combophy registers Use 'git am --show-current-patch' to see the failed patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for Refactor and Add helper function for combophy/tc ports (rev5)
In reply to Mahesh Kumar== Series Details ==
== Series Details ==
Series: Refactor and Add helper function for combophy/tc ports (rev5)
URL : https://patchwork.freedesktop.org/series/50484/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip 7a0475e44ad4 drm/i915/icl: create function to identify combophy port 99f69dd6d4e8 drm/i915/icl: use combophy/TC helper functions during display detection 1d213780b313 drm/i915/icl: Refactor get_ddi_pll using helper func 7e97618174e4 drm/i915/icl: Use helper functions to classify the ports d44e98562823 drm/i915/icl: Refactor icl pll functions fe97027237f6 drm/i915/icl: Combine all port/combophy macros at one place 76fe790f6910 drm/i915/icl: Introduce new macros to get combophy registers 3cc221173ac3 drm/i915/icl: Fix DDI/TC port clk_off bits -:26: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'tc_port' - possible side-effects? #26: FILE: drivers/gpu/drm/i915/i915_reg.h:9314: +#define ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port) (1 << ((tc_port) == PORT_TC4 ? \ + 21 : (tc_port) + 12))
total: 0 errors, 0 warnings, 1 checks, 54 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for Refactor and Add helper function for combophy/tc ports (rev5)
In reply to Mahesh Kumar== Series Details ==
== Series Details ==
Series: Refactor and Add helper function for combophy/tc ports (rev5)
URL : https://patchwork.freedesktop.org/series/50484/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4984 -> Patchwork_10467 =
== Summary - SUCCESS ==
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/50484/revisions/5/mbox/
== Known issues ==
Here are the changes found in Patchwork_10467 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@gem_exec_suspend@basic-s4-devices:
fi-blb-e6850: PASS -> INCOMPLETE (fdo#107718)
igt@kms_pipe_crc_basic@read-crc-pipe-b:
fi-byt-clapper: PASS -> FAIL (fdo#107362)
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-byt-clapper: PASS -> FAIL (fdo#107362, fdo#103191)
==== Possible fixes ====
igt@kms_frontbuffer_tracking@basic:
fi-byt-clapper: FAIL (fdo#103167) -> PASS fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#107362 https://bugs.freedesktop.org/show_bug.cgi?id=107362
fdo#107718 https://bugs.freedesktop.org/show_bug.cgi?id=107718
== Participating hosts (53 -> 46) ==
Missing (7): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-n2820
== Build changes ==
* Linux: CI_DRM_4984 -> Patchwork_10467
CI_DRM_4984: 90b59df999a13a6405f8d7ece08a69120a9b361a @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4678: 9310a1265ceabeec736bdf0a76e1e0357c76c0b1 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10467: 3cc221173ac3118a71378cf5e0ad68c12af019f2 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
3cc221173ac3 drm/i915/icl: Fix DDI/TC port clk_off bits76fe790f6910 drm/i915/icl: Introduce new macros to get combophy registers fe97027237f6 drm/i915/icl: Combine all port/combophy macros at one place d44e98562823 drm/i915/icl: Refactor icl pll functions7e97618174e4 drm/i915/icl: Use helper functions to classify the ports 1d213780b313 drm/i915/icl: Refactor get_ddi_pll using helper func 99f69dd6d4e8 drm/i915/icl: use combophy/TC helper functions during display detection 7a0475e44ad4 drm/i915/icl: create function to identify combophy port
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10467/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for Refactor and Add helper function for combophy/tc ports (rev5)
In reply to Mahesh Kumar== Series Details ==
== Series Details ==
Series: Refactor and Add helper function for combophy/tc ports (rev5)
URL : https://patchwork.freedesktop.org/series/50484/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4984_full -> Patchwork_10467_full =
== Summary - WARNING ==
Minor unknown changes coming with Patchwork_10467_full need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_10467_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_10467_full:
=== IGT changes ===
==== Warnings ====
igt@drm_read@empty-nonblock:
shard-snb: PASS -> SKIP +3== Known issues ==
Here are the changes found in Patchwork_10467_full that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@gem_cpu_reloc@full:
shard-skl: NOTRUN -> INCOMPLETE (fdo#108073)
igt@gem_exec_schedule@pi-ringfull-vebox:
shard-skl: NOTRUN -> FAIL (fdo#103158)
igt@gem_ppgtt@blt-vs-render-ctxn:
shard-skl: NOTRUN -> TIMEOUT (fdo#108039)
igt@gem_userptr_blits@readonly-unsync:
shard-skl: NOTRUN -> INCOMPLETE (fdo#108074)
igt@gem_wait@busy-default:
shard-snb: PASS -> INCOMPLETE (fdo#105411)
igt@kms_busy@extended-modeset-hang-newfb-render-a:
shard-skl: NOTRUN -> DMESG-WARN (fdo#107956) +2
igt@kms_ccs@pipe-a-crc-sprite-planes-basic:
shard-skl: NOTRUN -> FAIL (fdo#105458)
igt@kms_cursor_crc@cursor-256x256-random:
shard-apl: PASS -> FAIL (fdo#103232) +1
igt@kms_draw_crc@fill-fb:
shard-skl: NOTRUN -> FAIL (fdo#103184)
igt@kms_flip@flip-vs-expired-vblank:
shard-skl: PASS -> FAIL (fdo#105363)
igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-render:
shard-apl: PASS -> FAIL (fdo#103167) +1
igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-fullscreen:
shard-glk: PASS -> FAIL (fdo#103167) +3
igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-spr-indfb-fullscreen:
shard-skl: NOTRUN -> FAIL (fdo#105682)
igt@kms_frontbuffer_tracking@fbcpsr-stridechange:
shard-skl: NOTRUN -> FAIL (fdo#105683)
igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-indfb-draw-render:
shard-apl: SKIP -> INCOMPLETE (fdo#103927)
igt@kms_plane@pixel-format-pipe-a-planes:
shard-skl: NOTRUN -> DMESG-FAIL (fdo#103166, fdo#106885)
igt@kms_plane_alpha_blend@pipe-a-alpha-opaque-fb:
shard-apl: PASS -> FAIL (fdo#108145)
igt@kms_plane_alpha_blend@pipe-a-alpha-transparant-fb:
shard-skl: NOTRUN -> FAIL (fdo#108145) +2
igt@kms_plane_lowres@pipe-c-tiling-x:
shard-kbl: PASS -> DMESG-WARN (fdo#105345)
igt@kms_plane_multiple@atomic-pipe-b-tiling-yf:
shard-apl: PASS -> FAIL (fdo#103166)
igt@kms_psr@suspend:
shard-skl: PASS -> INCOMPLETE (fdo#107773)
igt@kms_rotation_crc@exhaust-fences:
shard-skl: NOTRUN -> DMESG-WARN (fdo#105748)
==== Possible fixes ====
igt@kms_cursor_crc@cursor-64x64-suspend:
shard-apl: FAIL (fdo#103232, fdo#103191) -> PASS
igt@kms_cursor_legacy@cursorb-vs-flipb-toggle:
shard-glk: DMESG-WARN (fdo#106538, fdo#105763) -> PASS
igt@kms_flip@2x-flip-vs-expired-vblank-interruptible:
shard-glk: FAIL (fdo#105363) -> PASS
igt@kms_flip_tiling@flip-yf-tiled:
shard-apl: DMESG-WARN (fdo#103558, fdo#105602) -> PASS +2
igt@kms_frontbuffer_tracking@fbc-1p-rte:
shard-apl: DMESG-FAIL (fdo#103167, fdo#103558, fdo#105602) -> PASS
igt@kms_frontbuffer_tracking@fbc-2p-primscrn-spr-indfb-draw-mmap-gtt:
shard-glk: FAIL (fdo#103167) -> PASS
igt@kms_plane@plane-panning-bottom-right-suspend-pipe-c-planes:
shard-skl: INCOMPLETE (fdo#104108) -> PASS
igt@kms_plane@plane-position-covered-pipe-a-planes:
shard-glk: FAIL (fdo#103166) -> PASS +1
igt@kms_plane_alpha_blend@pipe-a-constant-alpha-max:
shard-glk: FAIL (fdo#108145) -> PASS
igt@kms_plane_lowres@pipe-a-tiling-yf:
shard-kbl: DMESG-WARN (fdo#105345) -> PASS
igt@kms_plane_multiple@atomic-pipe-c-tiling-yf:
shard-apl: FAIL (fdo#103166) -> PASS +2
igt@kms_setmode@basic:
shard-apl: FAIL (fdo#99912) -> PASS fdo#103158 https://bugs.freedesktop.org/show_bug.cgi?id=103158
fdo#103166 https://bugs.freedesktop.org/show_bug.cgi?id=103166
fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#103184 https://bugs.freedesktop.org/show_bug.cgi?id=103184
fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#103232 https://bugs.freedesktop.org/show_bug.cgi?id=103232
fdo#103558 https://bugs.freedesktop.org/show_bug.cgi?id=103558
fdo#103927 https://bugs.freedesktop.org/show_bug.cgi?id=103927
fdo#104108 https://bugs.freedesktop.org/show_bug.cgi?id=104108
fdo#105345 https://bugs.freedesktop.org/show_bug.cgi?id=105345
fdo#105363 https://bugs.freedesktop.org/show_bug.cgi?id=105363
fdo#105411 https://bugs.freedesktop.org/show_bug.cgi?id=105411
fdo#105458 https://bugs.freedesktop.org/show_bug.cgi?id=105458
fdo#105602 https://bugs.freedesktop.org/show_bug.cgi?id=105602
fdo#105682 https://bugs.freedesktop.org/show_bug.cgi?id=105682
fdo#105683 https://bugs.freedesktop.org/show_bug.cgi?id=105683
fdo#105748 https://bugs.freedesktop.org/show_bug.cgi?id=105748
fdo#105763 https://bugs.freedesktop.org/show_bug.cgi?id=105763
fdo#106538 https://bugs.freedesktop.org/show_bug.cgi?id=106538
fdo#106885 https://bugs.freedesktop.org/show_bug.cgi?id=106885
fdo#107773 https://bugs.freedesktop.org/show_bug.cgi?id=107773
fdo#107956 https://bugs.freedesktop.org/show_bug.cgi?id=107956
fdo#108039 https://bugs.freedesktop.org/show_bug.cgi?id=108039
fdo#108073 https://bugs.freedesktop.org/show_bug.cgi?id=108073
fdo#108074 https://bugs.freedesktop.org/show_bug.cgi?id=108074
fdo#108145 https://bugs.freedesktop.org/show_bug.cgi?id=108145
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
== Participating hosts (6 -> 6) ==
No changes in participating hosts
== Build changes ==
* Linux: CI_DRM_4984 -> Patchwork_10467
CI_DRM_4984: 90b59df999a13a6405f8d7ece08a69120a9b361a @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4678: 9310a1265ceabeec736bdf0a76e1e0357c76c0b1 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10467: 3cc221173ac3118a71378cf5e0ad68c12af019f2 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10467/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx